Used Processing in Manitoba, Canada

Used Mariott Walker - Model 10.5T-1-C-BH Spray Dryer

• Manufacturer: Walker

Model 10.5T-1-C-BH Marriott Walker direct gas heated spray drier CAPACITY of the DRIER The water evaporating capacity of the drier will vary with inlet and outlet air temperatures and the process airflow rate, ...

Used 4 Stage Nano Filtration System, With Pumps, Heat Exchanger, Tanks

The NF system is designed to receive fresh, UF permeate from storage tanks (supplied by others). The permeate (supplied by others) from the UF system to a 300 gallon NF feed/CIP balance tank at up to 260 gallon...

Used Kice Venturi Jet Filter, With Rotary Airlock, Cyclone & Fan

• Manufacturer: Kice

CKS48 Cyclone Collector Barrel material of construction to be 12 ga. 304L stainless steel - Cone material of construction to be 12 ga. 304L stainless steel - Inlet transition to 12" O.D. - Clean air outlet to...

Used Bepex PCX Dispersion Dryer Package

• Manufacturer: Bepex

Removal cost to be submitted to buyer upon request. PCX System Virgin Feed Rate: 6,810 kg/hr at 65% Moisture PCX System Dried Product Rate: 2,650 kg/hr at 10% Moisture Used on pea starch and/or canola meal. S...

Used 200 Gallon Tank, Stainless Steel

-with lid -cone bottom -with lifting lugs -location: Winnipeg, Manitoba

Used 1000 Gallon Tank, 316L Stainless Steel

-slope bottom to end discharge -with cip spray ball -with lid -sanitary interior polish -previous use: CIP tank -location: Winnipeg, Manitoba

Used 600 Gallon Tank, 316L Stainless Steel, With Mixer

-with 0.5 hp, 575 volt mixer -cone bottom -with lid -with spray ball -sanitary interior polish -no legs -shop drawings available -location: Winnipeg, Manitoba

Used 600 Gallon Tank, 316L Stainless Steel, With Mixer

-with mixer -cone bottom -with lid -sanitary interior polish -location: Winnipeg, Manitoba

Used Enerquip Heat Exchanger, Tube & Shell

• Manufacturer: Enerquip

-manufacturer: Enerquip -shell side mawp: 150 PSI @ 375 deg.f -tube side mawp: 150 psi @ 375 deg.f -shell side material: 304L stainless steel -tube side material: 316L stainless steel -contact surfaces meet ...

Used Enerquip Heat Exchanger, Tube & Shell

• Manufacturer: Enerquip

-manufacturer: Enerquip -shell side mawp: 150 PSI @ 375 deg.f -tube side mawp: 150 psi @ 375 deg.f -shell side material: 304L stainless steel -tube side material: 316L stainless steel -contact surfaces meet ...

Used Enerquip Heat Exchanger, Tube & Shell

• Manufacturer: Enerquip

-manufacturer: Enerquip -shell side mawp: 150 PSI @ 375 deg.f -tube side mawp: 150 psi @ 375 deg.f -shell side material: 304L stainless steel -tube side material: 316L stainless steel -contact surfaces meet ...

Used Enerquip Heat Exchanger, Tube & Shell

• Manufacturer: Enerquip

-manufacturer: Enerquip -shell side mawp: 150 PSI @ 375 deg.f -tube side mawp: 150 psi @ 375 deg.f -shell side material: 304L stainless steel -tube side material: 316L stainless steel -contact surfaces meet ...

Used Enerquip Heat Exchanger, Tube & Shell

• Manufacturer: Enerquip

-manufacturer: Enerquip -shell side mawp: 150 PSI @ 375 deg.f -tube side mawp: 150 psi @ 375 deg.f -shell side material: 304L stainless steel -tube side material: 316L stainless steel -contact surfaces meet ...

Used Enerquip Heat Exchanger, Tube & Shell

• Manufacturer: Enerquip

-manufacturer: Enerquip -shell side mawp: 150 PSI @ 375 deg.f -tube side mawp: 150 psi @ 375 deg.f -shell side material: 304L stainless steel -tube side material: 316L stainless steel -contact surfaces meet ...

Used Kice Venturi Jet Filter, With Rotary Airlock, Cyclone & Fan

• Manufacturer: Kice

- CK42 Cyclone Collector - - Barrel material of construction to be 12 ga. carbon steel with 3/16" A.R. steel in the back of the inlet. - - Cone material of construction to be 12 ga. carbon steel. - Inlet trans...