Used Processing in Texas, USA

Trusted Seller
15" WIDE NILPETER FB-4300 8 COLOR FLEXO PRESS 1 DIE CUTTING STATION
- used
- Manufacturer: Nilpeter
Nilpeter Model FB-4300 Printing Press 15" Wide 40" Diameters 8 Flexo stations 1 Die cutting station Gas drying Complete with all parts and manuals Some mandrels included
Texas, USA
Trusted Seller
JM HEAFORD MODEL VIPER 2250 MOUNTER PROOFER
- used
- Manufacturer: Viper
JM Heaford Model Viper 2250 Year: 1998 Under Power 220v 60hz Good operational condition
Texas, USA
Trusted Seller
2004 Hydro-Chem SMR 80,000 scfh
- used
- Manufacturer: Hydro-Chem
Hydro-Chem hydrogen gas plant. Capacity 1.9 MMSCFD (80,000 scfh or 2100 Nm3/hr). Built 2004, in operation until 2021. Was idled with nitrogen blanket on gas side until removed in 2021. Has 20 tube reformer (t...
Texas, USA
Trusted Seller
2.4 Sq Meter Rosenmond Nutsche Filter, 316 S/S
- used
- Manufacturer: Rosenmund
2.4 Sq Meter Rosenmond Nutsche Filter, 316 S/S Used Rosenmund agitated nutsche Filter/Dryer, 2.4 square meter surface area, 316 stainless steel construction, rated 50 PSI and full vacuum internal at 302 degrees F...
Texas, USA
Trusted Seller
2023 Hydrogen PSA System 1.3 MMSCFD
- new
- Manufacturer: Honeywell
New, Never Installed Technical Specs and Drawings on Request
Texas, USA
Trusted Seller
1981 Hydro-Chem SMR 50,000 scfh
- used
- Manufacturer: Hydro-Chem
Hydrogen gas plant by Hydro-Chem designed to generate at 50,000 scfh (1.2 MMSCFD) at 99.9% purity. Has waste heat boiler, natural gas compressor, 4 psa units, FD fan & ID fan on reformer with space for 12 tubes ...
Texas, USA
COLUMNS 60576-2
- used
- Manufacturer: HYDRO CHEM PROCESSING
HYDROGEN PURIFICATION ABSORBER; 22" SKIRT; W/ CARBON PACKING; MFG BY HYDRO CHEM PROCESSING; 1/4" THK; FLANGED TOP NOZZLE; ...
Cleveland, TX
1985 SHM 1400 55" Wide Fixed Bed Sheeter
- used
Single Shaft Unwind Upgraded gear box 48-inch (1200 mm) Pile height Sheet Width 55-inch (1400mm) inch maximum Sheet Length 60-inch (1575mm) maximum (3) Tidland Slitters Rated to 1000 FPM (335m/min) maximum mechan...
Dallas, TX
2005 Nordemeccanica Super Simplex 1500 Laminator
- used
Rated to 1400 FPM 1500mm Wide Servo driven unwinds and rewind 40" Unwind, Enercon Treater, Auto Adhesive tank filling, Dancer assemblies on unwinds and rewinds, Edge guides on unwinds and rewinds, Temperature con...
Dallas, TX
2009 DCM Sleeve Auto Seamer
- used
Web Width, 23.6” (600mm) Diameter Seam 2-4mm 124134717159A
Dallas, TX
Mercury Zerand 45" Web-fed Platen Die Cutter
- used
- Manufacturer: Mercury
44" Maximum Width X 36" Long Zerand 60” Turret Unwind, Decurling Roll Stand Backstand, GWD Web Guide, Intermediate Roll Clamp, Takeaway Conveyor, Stacking Table, 27" x 17" Trim Removal Belt Conveyor include die ...
Dallas, TX
2006 Nordmecccanica Super Simplex SL1400 Solventless Laminator
- used
56” (1430mm) Max web width 40” (1000mm) Unwind/Rewind
Dallas, TX
2005 Uteco Horizon 130 Laminator
- used
- Manufacturer: Uteco
NEW ELECTRONICS IN 2022 52” Wide single pass laminator Water based and solvent based Rated to 1000 FPM 40” Diameter Turret Unwind, 32” Diameter Turret Rewind, 3” & 6” Cores, (2) Enercon corona treaters, Smoothing...
Dallas, TX
1994 SHM 1400 DK CTR 55" Wide Sheeter
- used
Single shaft unwind Max web width: 55" | Cut off range: 16" - 55" | Max knife load multiple webs: 500 gm/m2 | Max knife load single web: 400 gm/m2 | Pile height max: 47" | Pile weight max with pallet: 3300lbs
Dallas, TX
AUTOFOLD AF 516 SEE COIL LINE
- new
- Manufacturer: Advanced Cutting System
AUTOFOLD AF 516 SEE (LEFT OR RIGHT FEED AVAILBLE) The original Autofold system is the backbone of the Autofold production due to its design and the use of the best material’s in manufacture ,all Autofold machines...
Ennis, TX
Chicago Pneumatic QRS7.5 Industrial Compressor
- used
- Manufacturer: Chicago Pneumatic
- Model: QRS7.5
Good condition Chicago Pneumatic QRS7.5 Industrial Compressors manufactured in 2017. Located in USA and other countries. Click request price for more information.
USA