- Trusted Seller
2000 GEA Ahlborn VT40 BC-16
used
- Manufacturer: GEA
- Model: VT40 BC-16
- Capacity: 5,000 liters per hour
Plate heat exchanger, sanitary (PHE). Max working pressure: 10 bar - Max working temperature: 100 °C. Beam length: 194 cm, connections: 4x DN100 Din - 2 x DN65 Din. Current configuration: 2 Sections: 73-87 plates...
Lopik, Netherlands - Trusted Seller
Stork DS 1525
used
- Manufacturer: Stork
- Capacity: 2000 liters per hour
Tubular flow sterilizer, Temperature cycles: 10-90-130/145-30-60 degrees Celcius. Including: pump, balance tank, temperature indicators. With indirect heating with steam and manual temperature control.
Lopik, Netherlands - Trusted Seller
2004 Alfa Laval Spiraflo 1x2 VLM 4x18/63-60-316L/304D
used
- Manufacturer: Alfa-Laval
- Capacity: 0 capacity
Alfa Laval Spiraflo 1x2 VLM 4x18/63-6.0-316L/304D 2 tubular spiraflow pipes. Length pipe: 5,70 mtr. Total: 6,15 mtr. Heat transfer area: 1,29 m2 per pipe
Lopik, Netherlands - Trusted Seller
1988 Stork Sterideal
used
- Manufacturer: Stork
- Model: STERIDEAL
Stork Sterideal. UHT line, consists of Stork UHT, Tubular indirect heating, 4 sections of triple tube (tube in tube in tube), Stork holding tube and Skid with infeed tank. new Tubular heatexchanger in 2012 only u...
Lopik, Netherlands - Trusted Seller
N.N.. SS
used
- Manufacturer: N.N..
Double jacketed pin mixer. Shaft diameter 85 mm, 3 rows with 14 pins (42 pieces total) - cylinder diameter 250 mm with 2 rows with 19 and 20 (total 39) pieces. Cylinder length 195 cm. Connections: 2 x 2" Din and ...
Lopik, Netherlands - Trusted Seller
Tubular Heatexchanger
used
- Capacity: capacity
Monotube, inner diameter (product) 23mm outer diameter (water) 40mm, 42 tubes x 3 mtr each. total dimensions: Length 3.00 mtr x Width 1.30 m, Height 1.50 mtr. On a stainless steel frame. Flexible in using, many l...
Lopik, Netherlands - Trusted Seller
1972 Paasch & Silkeborg H-3575
used
- Manufacturer: Paasch & Silkeborg
Tubular Heatexchanger 36 tubes, total dimensions: L 320cm X W 80cm X H 140cm
Lopik, Netherlands - Trusted Seller
2006 Alfa Laval C10-SR
used
- Manufacturer: Alfa-Laval
- Capacity: 954.4 liters
Design pressure: 10.0 bar, design temperature: -10 / 110 ° C, test pressure (Gauge): 13.0 bar
Lopik, Netherlands - Trusted Seller
2008 Tetra Pak MS10-SR
used
- Manufacturer: Tetra Pak
- Model: MS10SR
- Capacity: 21 liters
Pressure: 10 bar / Beam length: 1000 mm, connections: 97 mm / 4 "SMS Currenct configuration: 1 Section: 44 plates - Connections head: 2 up, follower 2 down Total dimensions: lxwxh: 125 cm x 67 cm x 130 cm.
Lopik, Netherlands - Trusted Seller
1994 Alfa Laval Clip 10-RM
used
- Manufacturer: Alfa-Laval
- Capacity: 814.6 liters
Pressure: 10 bar. Beam length: 3000 mm. Connections: 4 "SMS. Current configuration: 1 Section: no plates (plates alreadys dismantled). Connections head: 2 up, follower 2 under.
Lopik, Netherlands - Trusted Seller
1995 Tetra Pak Spiraflow TTF-38s/16c-3-1
used
- Manufacturer: Tetra Pak
- Model: TTF38
- Capacity: 6 liters
Monotube, outer diameter 38 mm (smouth) and inner diameter 16 mm (coagurated). 6 Tubes of 3 meter. Product side: pressure up to 60 bar - temperature up to 160 °C - volume: 1 liter per tube, total volume 6x 1 = 6 ...
Lopik, Netherlands - Trusted Seller
1959 Stork DS
used
- Manufacturer: Stork
- Capacity: 2000 liters per hour
Stork DS Pre-sterilizer no: 13384 Capacity: 2000 liters per hour
Lopik, Netherlands - Trusted Seller
2005 APV Crepaco SSHE
used
- Manufacturer: Crepaco
- Capacity: 200 litres per hour
Scraped heater - cooler set, used as sterilizer, including 3 holding tubes 30 - 30 - 210 seconds (various options possible on swingbend panel). Each scraped heaterexchanger has a temperature indicator on water an...
Lopik, Netherlands - Trusted Seller
1998 Alfa Laval CLIP 8-RM
used
- Manufacturer: Alfa-Laval
- Model: CLIP 8-RM
- Capacity: 103.7 liters
Pressure: 7 bar. Beam length: 1800 mm. Connections: SMS. Current configuration: 1 Section: 164 plates - Connections head: 2 up, follower 1 down. Weight total: 1.718 kg.
Lopik, Netherlands - Trusted Seller
2009 Tetra Pak Hot water set / MT-108
used
- Manufacturer: Tetra Pak
- Capacity: 9.3 liters
Hotwater set with tubular heat exchanger, steam valve (Samson) and piping. Pressure: shell 0-15 bar, tubes 0-40 bar. Temperature: shell 0-180 °C, tubes 0-180 °C. Volume: shell 9,3 liter, tubes 6,1 liter.
Lopik, Netherlands