Machine Tools » Andalusia

Building Filters

20

Used roller in Andalusia, Spain

  • Trusted Seller
    2004 OSCAM SMART FUTURA 2M

    2004 OSCAM SMART FUTURA 2M

    • Manufacturer: Oscam

    OSCAM SMART FUTURA 2M Both mobile benders 7 bars 12mm 5 bars of 16 mm 4 bars 20mm 3 bars of 25 mm 1 bar 40 mm

    Malaga, Spain
  • Trusted Seller
    SCHNELL VPR 20/1/DX

    SCHNELL VPR 20/1/DX

    • Manufacturer: Schnell
    • Noise level: 80 dB

    SCHNELL VPR 20/1/DX Motorized distribution track with Schnell lateral turning of bars model VPR 20/1/DX

    Malaga, Spain
  • Trusted Seller
    MEP MINI MAXI 14

    MEP MINI MAXI 14

    • Manufacturer: MEP
    • Model: Mini Maxi 14

    MEP MINI MAXI 14 Automatic Stirrup bending hydraulically operated for estrivos from 4 mm (2-wire), 6 mm (2-wire), 8 mm (2-wire), 10 mm (2-wire), 12 mm (1 wire). Electronic programmer industrial type PC monitor to...

    Malaga, Spain
  • Trusted Seller
    2008 MEP MINI SYNTAX 16

    2008 MEP MINI SYNTAX 16

    • Manufacturer: MEP
    • Model: Mini Syntax 16

    MEP MINI SYNTAX 16 Automatic production center rebar, bidirectional, electronically controlled for the manufacture of small brackets and large, straightened bars as straight bars and straightened, with bends at o...

    Malaga, Spain
  • Trusted Seller
    2000 MEP MINI SYNTAX 16

    2000 MEP MINI SYNTAX 16

    • Manufacturer: MEP
    • Model: Mini Syntax 16

    MEP MINI SYNTAX 16 Automatic production center rebar, bidirectional, electronically controlled for the manufacture of small brackets and large, straightened bars as straight bars and straightened, with bends at o...

    Malaga, Spain
  • Trusted Seller
    MEP MINI MAXI 80 V

    MEP MINI MAXI 80 V

    • Manufacturer: MEP
    • Model: Mini Maxi 80

    MEP MINI MAXI 80 V Automatic Stirrup bending hydraulically operated for estrivos from 4 mm (2-wire), 6 mm (2-wire), 8 mm (2-wire), 10 mm (2-wire), 10 mm (1 wire). Maximum working diameter 10mm Electronic programm...

    Malaga, Spain
  • Trusted Seller
    2007 SCHNELL FORMULA 14

    2007 SCHNELL FORMULA 14

    • Manufacturer: Schnell

    SCHNELL FORMULA 14 Automatic bidirectional stirrup machine for the production of hot rolled or cold drawn roll iron. Driven by electric servomotors, they allow the production of stirrups and bars cut to size from...

    Malaga, Spain
  • Trusted Seller
    SCHNELL RETA 16

    SCHNELL RETA 16

    • Manufacturer: Schnell

    SCHNELL RETA 16 Quick automatic roller straightener for the production of longitudinal bars cut to size up to Ø 16 mm. Drive by digital electric servomotors. Maximum diameter straightened 16mm in hardness of 650 ...

    Malaga, Spain
  • Trusted Seller
    2001 MEP SUPERFLEX 40

    2001 MEP SUPERFLEX 40

    • Manufacturer: MEP
    • Model: Superflex 40
    • Shearing length: 12,000 mm

    MEP SUPERFLEX 40 Line of automatic cut and measurement to electronic programming for the production of bars cut to size. The SUPERFLEX system allows for maximum productive flexibility by reducing the operator’s m...

    Malaga, Spain
  • Trusted Seller
    2006 SCHNELL EURA 20

    2006 SCHNELL EURA 20

    • Manufacturer: Schnell
    • Model: EURA 20

    SCHNELL EURA 20 Year of manufacture 2006, E​ura 20 is a dual-direction bender, with 2 bending heads, apt to manufacture stirrups and rebars with bends at both ends processing both hot and cold-drawn steel in coil...

    Malaga, Spain
  • Trusted Seller
    2007 PROGRESS ESR 16-2BK /

    2007 PROGRESS ESR 16-2BK / 1Tw

    • Manufacturer: Progress

    PROGRESS ESR 16-2BK / 1Tw Monoline straightening and cutting machine mod. ESR 16, with fully automatic diameter change. A straightening equipment, consisting of 1 rotor with five bushings managed by the computer,...

    Malaga, Spain
  • Trusted Seller
    SCHNELL BAT 65/3/12/M

    SCHNELL BAT 65/3/12/M

    • Manufacturer: Schnell

    SCHNELL BAT 65/3/12/M Electro-mechanical automatic cutting bench with 3 transfer roller 1 bar Ø 32mm 2 bar Ø 26mm 3 bar Ø 20mm 4 bar Ø 16mm 25 cuts/min Maximum Pulling Speed 115m/min 10000 hours work

    Malaga, Spain
  • Trusted Seller
    2007 PROGRESS EBAS 16

    2007 PROGRESS EBAS 16

    • Manufacturer: EBA

    PROGRESS EBAS 16 Automated straightening and diameter change Driven by electric servomotors, they allow the production of stirrups and bars cut to size from wires up to Ø 16 mm or double Ø 12 mm 2×6, 2×8, 2×10, 2...

    Malaga, Spain
  • Trusted Seller
    2006 MEP SYNTEX 20 S

    2006 MEP SYNTEX 20 S

    • Manufacturer: MEP
    • Model: Syntax 20

    MEP SYNTEX 20 S Automatic change of diameters Pre-feeder group with cabestrate and motorized rollers Second group of drag to optimize the folding on both sides Winding machines controlled by computer management a...

    Malaga, Spain
  • Trusted Seller
    2008 EVG POLIBEND 16

    2008 EVG POLIBEND 16

    • Manufacturer: EVG

    EVG POLIBEND 16 Bidirectional automatic stirrup iron for making rolled hot rolled or cold drawn. Driven by hydraulic systems, allow produce stirrups and cut to size bars from wires up to Ø 16 mm or double Ø 10 mm...

    Malaga, Spain
12

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.