Machine Tools » Belgium

Building Filters

111

Used engine in Belgium

  • Trusted Seller
    GAS G.A.S.-

    GAS G.A.S.-

    • Manufacturer: GAS

    GAS G.A.S.-

    Deinze, Belgium
  • Trusted Seller
    GAS EA 30-311010

    GAS EA 30-311010

    • Manufacturer: GAS

    GAS EA 30-311010

    Deinze, Belgium
  • Trusted Seller
    GAS DR 30-Motor Regler

    GAS DR 30-Motor Regler

    • Manufacturer: GAS

    GAS DR 30-Motor Regler

    Deinze, Belgium
  • Trusted Seller
    2014 Stako 3D Tube cutting

    2014 Stako 3D Tube cutting 13 meter

    • Manufacturer: Stako

    As good as new Gas/oxy machine (no plasma) Max tubedia: 860 mm Max thickness: 150 mm 3D bevel cutting Software included with pre-shapes for easy programming

    Deinze, Belgium
  • Trusted Seller
    Messer Griesheim Statosec P6500 CNC

    Messer Griesheim Statosec P6500 CNC

    • Manufacturer: Messer Griesheim

    Torit Filter recuperation cap: 6000 m³ Plasma suction table with valves: 12000 x 5500 mm Gas suction table: 12000 x 5500 mm Driven at both sides Extra wide capacity!! RAIL DISTANCE C-C: 6500 mm

    Deinze, Belgium
  • Trusted Seller
    SAF Cybertome OXY1

    SAF Cybertome OXY1

    • Manufacturer: SAF

    + 1 torch Plasma + 2 plasma sources (Nertajet 320) + 5 torches Gas + rails 18 m (length) Transport Width: 4450 Gas=300 mm / Plasma=60mm Cutting Capacities: - argon-hydrogen: 5 80 mm - compressed air: 3 30 ...

    Deinze, Belgium
  • Trusted Seller
    SAF Multitome 4000 x 1500

    SAF Multitome 4000 x 1500 mm CNC

    • Manufacturer: SAF Multitome

    with optical eye no table included Longitudinal travel x-axis: 4000 mm | Cross travel y-axis: 1500 mm | Gas cutter: 2x gas | Read-out / control: Digisaf 2.5

    Deinze, Belgium
  • Trusted Seller
    2005 Stako Oxy 8000 x

    2005 Stako Oxy 8000 x 3000 mm CNC

    • Manufacturer: Stako

    Burny graphic control Between centers: 4000 mm Individual automatic ignition individual heightcontrol Machine is driven on both sides Including rolltable Optional: possibility to add plasmacutter

    Deinze, Belgium
  • Trusted Seller
    ESAB CXB 2025 1500x3000mm CNC

    ESAB CXB 2025 1500x3000mm CNC

    • Manufacturer: Esab

    equipped with 2 gascuttingheads (can be exchanged with plasma NCE 910 control) table exists of 2 units 1500 x 1500 mm (with suction) Raillenght: 4000 mm cutting cap with argon/helium: 40 mm cutting cap wit...

    Deinze, Belgium
  • Trusted Seller
    Oxymill/Burny Oxy 3000 x 8000

    Oxymill/Burny Oxy 3000 x 8000 mm CNC

    • Manufacturer: Burny

    Renewed in 2008 Between Centers: 4000 mm Burny digital CNC control with touchscreen Individual automatic ignition individual heightcontrol Machine is driven on both sides

    Deinze, Belgium
  • Trusted Seller
    Messer Griesheim Corta P 5000

    Messer Griesheim Corta P 5000

    • Manufacturer: Messer Griesheim

    Messer Griesheim Corta P 5000 Longitudinal travel x-axis: 21000 mm | Cross travel y-axis: 4500 mm | Cutting capacity: 200 mm | Piercing capacty: 100 mm | Gas cutter: 4 x Gas | Read-out / control: CNC KS 20 Graphic

    Deinze, Belgium
  • Trusted Seller
    Esab - Kjellberg UXD-P2500 CNC

    Esab - Kjellberg UXD-P2500 CNC

    • Manufacturer: Kjellberg

    CC rails: 2500 mm 1 marking head Cap plasma: 45 mm Cap inox oxy: 300 mm Source Kjellberg: 63 Amp - 42 No table included

    Deinze, Belgium
  • Trusted Seller
    MicroStep 7000

    MicroStep 7000

    • Manufacturer: MicroStep

    cutting tables included: 4 tables of 2600 x 1600 mm center - center rail distance: 3600 mm Hypertherm HT2000LHF 200 amp Hypertherm ArcWriter Kemper 9000 filterinstallation 5000m3/h

    Deinze, Belgium
  • Trusted Seller
    Safmatic Cybertome-E Oxy 5200 mm

    Safmatic Cybertome-E Oxy 5200 mm

    • Manufacturer: Safmatic Cybertome-E

    tables not included 8 torches - each torch individualy movable - tool holder POC 250E - capacitive probe - torch ignition - automatic indexing center-center raildistance: 6520 mm double driven Digisaf 100 -...

    Deinze, Belgium
  • Trusted Seller
    CR Electronic EU 4-15

    CR Electronic EU 4-15

    • Manufacturer: CR Electronic

    CR Electronic EU 4-15 Longitudinal travel x-axis: 4300 mm | Cross travel y-axis: 1800 mm | Cutting capacity: 12 mm | Table dimensions: 4000 x 1500 mm | Plasmasource: Hypertherm Powermax 1000 | Gas cutter: 1x

    Deinze, Belgium
12345

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.