Machine Tools » Bern

Search By Category

Search By Manufacturer

Building Filters

520

Used controller in Bern, Switzerland

  • Trusted Seller
    2009 PFIFFNER / HYDROMAT HW

    2009 PFIFFNER / HYDROMAT HW 20/10

    • Manufacturer: Hydromat
    • Model: HW 20/10

    Control: SIEMENS | Units horizontal: 10 | Voltage 50 hz 3x: 400 Volt | Machine's weight about: 5100 kg | Length: 2600 mm | Width: 2500 mm | Height: 2200 mm

    Brügg, Switzerland
  • Trusted Seller
    2020 ELETTRORAVA VR 10

    2020 ELETTRORAVA VR 10

    • Manufacturer: Elettrorava

    Control: TECHNIQUES SP1405 | Balancing body weight max.: 10 kg | Up to: 1000 t/min | Machine's weight about: 500 kg | Length: 1200 mm | Width: 700 mm | Height: 600 mm

    Brügg, Switzerland
  • Trusted Seller
    PFIFFNER / HYDROMAT V 12

    PFIFFNER / HYDROMAT V 12 kurz

    • Manufacturer: Hydromat

    Voltage 50 hz 3x: 380 Volt | Spindle motor: 40 kW | Machine's weight about: 6200 kg | Weight of the control about: 600 kg | Length: 10606 mm | Width: 4120 mm | Height: 3400 mm

    Brügg, Switzerland
  • Trusted Seller
    2019 HAUSER H55-400

    2019 HAUSER H55-400

    • Manufacturer: Hauser

    Control: FANUC Series 3oi-Model B | Table length: 1440 mm | Table width: 860 mm | T-channel width: 14 mm | Number of spline: 7 | Table load max.: 800 kg | Longitudinal travel (x-axis): 1300 mm | Transversal trav...

    Brügg, Switzerland
  • Trusted Seller
    SNIJSTAAL S 250 / 65

    SNIJSTAAL S 250 / 65 APS

    • Manufacturer: SNIJSTAAL

    Control: P 2000 | Max. temperature: 250 °C | Width: 800 mm | Height: 1500 mm | Depth: 600 mm | Power of the heating: 18 kW | Ampere: 25 A | Voltage 50 hz 3x: 400 Volt | Machine's weight about: 250 kg | Length: 8...

    Brügg, Switzerland
  • Trusted Seller
    2006 BURKARDT HK 160I /

    2006 BURKARDT HK 160I / So

    • Manufacturer: BURKARDT

    Control: SIEMENS SIMATIC | Pressure: 1600 kN | Fixed table length: 1200 mm | Width: 500 mm | Up to: 90 c/min | Adjustment of the slide: 120 mm | Voltage 50 hz 3x: 400 Volt | Machine's weight about: 32’000 kg | L...

    Brügg, Switzerland
  • Trusted Seller
    TECHNICA ZSM 5100

    TECHNICA ZSM 5100

    • Manufacturer: TECHNICA

    Control: Technica Flat Panel Control | Min. work-piece diameter: 8 mm | Max. work piece diameter: 125 mm | Workpiece length min.: 50 mm | Workpiece length max.: 1090 mm | Table load max.: 120 kg | Angle of the c...

    Brügg, Switzerland
  • Trusted Seller
    2000 BROTHER TC-31 A

    2000 BROTHER TC-31 A

    • Manufacturer: Brother
    • Model: TC-31A

    Control: CNC – A00 | Number of axis total: 3 | Number of spindles: 1 | Number of tables: 2 | Table length: 500 mm | Table width: 270 mm | Table load max.: 80 kg | Longitudinal travel (x-axis): 350 mm | Transvers...

    Brügg, Switzerland
  • Trusted Seller
    DIXI 100 / CHO 2x48

    DIXI 100 / CHO 2x48 - CHP 9

    • Manufacturer: Dixi

    Control: GE FANUC 15-MB / 4 axis | Number of axis total: 4 | Length: 320 mm | Width: 320 mm | Number of tools: 2 48 = 96 | Spindle nose iso: 40 | Up to: 12000 t/min | Voltage 50 hz 3x: 380 Volt | Tool adjustment...

    Brügg, Switzerland
  • Trusted Seller
    2000 SODICK AM3L

    2000 SODICK AM3L

    • Manufacturer: Sodick
    • Model: AM3L

    Control: SODICK LN1 | Number of axis total: 3 | Length: 1260 mm | Width: 1250 mm | Table load max.: 550 kg | Longitudinal traverse (x-axis): 300 mm | Cross traverse (y-axis): 200 mm | Height adjustment (z-axis):...

    Brügg, Switzerland
  • Trusted Seller
    2002 FPT DINO

    2002 FPT DINO

    • Manufacturer: FPT
    • Model: DINO

    Control: HEIDENHAIN 530 | Number of axis total: 5 | X axis: 2800 mm | Y axis: 800 mm | Z axis: 1600 mm | Taper in spindle: HSK 63 | From: 0 t/min | Up to: 18000 t/min | Voltage 50 hz 3x: 380 Volt | Total install...

    Brügg, Switzerland
  • Trusted Seller
    SCHAUBLIN 102 N / KL

    SCHAUBLIN 102 N / KL 3

    • Manufacturer: Schaublin
    • Model: 102N
    • Spindle bore: 20 mm

    Control: Combitec E-600 | Centre height: 102 mm | Distance between centres: 375 mm | Swing over cross-slide: 120 mm | Swing over bed: 200 mm | Inner taper type: W20 | Up to: 2800 t/min | Taper in tailstock: MK2 ...

    Brügg, Switzerland
  • Trusted Seller
    2010 MIKRON Multistar CX-24 /

    2010 MIKRON Multistar CX-24 / 1500

    • Manufacturer: Mikron
    • Model: Multistar CX-24

    Number of stations: 24 | Max. no. of upper stations: 23 | Max. no. of lower stations: 22 | Max. no. of side stations: 22 | From: 500 t/min | Up to: 32000 t/min | Production capacity: 70 pce/min | Multiple cycle ...

    Brügg, Switzerland
  • Trusted Seller
    Muller Machines SA 480 V

    Muller Machines SA 480 V

    • Manufacturer: Muller

    Control: FANUC 0iMF Plus | Table length: 650 mm | Table width: 410 mm | Number of t-channels: 3 | Distance of the t-slots: 125 mm | T-channel width: 14 mm | Table load max.: 280 kg | Distance spindle nose to tab...

    Brügg, Switzerland
  • Trusted Seller
    SIMONET 102

    SIMONET 102

    • Manufacturer: SIMONET
    • Spindle bore: 20 mm

    Control: BERGER Villeret | Centre height: 102 mm | Distance between centres: 450 mm | Swing over cross-slide: 120 mm | Swing over bed: 200 mm | Spindle hole: 20.0 mm | Inner taper type: 20 W | Taper in tailstock...

    Brügg, Switzerland
2223242526

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.