Machine Tools » Bern

Search By Category

Search By Manufacturer

Building Filters

520

Used controller in Bern, Switzerland

  • Trusted Seller
    2000 LNS M 20

    2000 LNS M 20

    • Manufacturer: LNS
    • Spindle bore: 24 mm

    Max. turning diameter: 20 mm | Turning length: 320 mm | Max. drilling diameter: 10 mm | Max. threading diameter: 8 M | Internal spindle diameter: 24 mm | From: 200 t/min | Up to: 5000 t/min | Number of positions...

    Brügg, Switzerland
  • Trusted Seller
    2006 IEMCA L 20 VIII

    2006 IEMCA L 20 VIII

    • Manufacturer: Iemca

    Number of spindles: 2 | Max. turning diameter: 20 mm | Maximum turning length: 200 mm | From: 200 t/min | Up to: 6000 t/min | Numbers: 3 | Number of tools: 12 | Turning tools: 5 pce | Drilling tools: 3 pce | Tra...

    Brügg, Switzerland
  • Trusted Seller
    2006 IEMCA L 20

    2006 IEMCA L 20

    • Manufacturer: Iemca

    Number of spindles: 2 | Max. turning diameter: 20 mm | Maximum turning length: 200 mm | From: 200 t/min | Up to: 6000 t/min | Numbers: 3 | Number of tools: 12 | Turning tools: 5 pce | Drilling tools: 3 pce | Tra...

    Brügg, Switzerland
  • Trusted Seller
    no-image_en.png

    CONTROL LEVER for bottom slide””

    • Manufacturer: scemama sa

    pour coulisseau inférieur du chariot Weight: 1.25 kg

    Biel/Bienne, Switzerland
  • Trusted Seller
    2014 HERMLE C 42 U

    2014 HERMLE C 42 U

    • Manufacturer: Hermle
    • Model: C 42 U

    Control: HEIDENHAIN TNC 530 | Number of axis total: 5 | Table length: 400 mm | Table width: 400 mm | Number of t-channels: 5 | T-channel width: 14H7 mm | Table load max.: 450 kg | Longitudinal travel (x-axis): 8...

    Brügg, Switzerland
  • Trusted Seller
    2003 DMG DMC 64 V

    2003 DMG DMC 64 V linear

    • Manufacturer: DMG Mori
    • Model: DMC 64 V LINEAR

    Control: SIEMENS 840 D | Table length: 850 mm | Table width: 630 mm | Table load max.: 600 kg | Longitudinal travel (x-axis): 640 mm | Transversal travel (y-axis): 600 mm | Vertical travel (z axis): 500 mm | Num...

    Brügg, Switzerland
  • Trusted Seller
    STARRAG ZS 500-130

    STARRAG ZS 500-130

    • Manufacturer: Starrag
    • Model: ZS 500-130

    Control: SIEMENS SINUMERIK 840 D | Number of axis simultaneous: 5 | Number of spindles: 1 | Table load max.: 800 kg | Longitudinal travel (x-axis): 800 mm | Transversal travel (y-axis): 750 mm | Vertical travel ...

    Brügg, Switzerland
  • Trusted Seller
    2015 HAAS VF-4 SS

    2015 HAAS VF-4 SS

    • Manufacturer: Haas
    • Model: VF-4SS
    • Spindle taper: CAT 40

    Control: HAAS AUTOMATION | Number of axis simultaneous: 3 | Table length: 1321 mm | Table width: 457 mm | Number of t-channels: 5 | Distance of the t-slots: 80 mm | T-channel width: 16 mm | Table load max.: 800 ...

    Brügg, Switzerland
  • Trusted Seller
    2002 DMG DMU 60 T

    2002 DMG DMU 60 T

    • Manufacturer: DMG Mori
    • Model: DMU 60

    Control: HEIDENHAIN MillPlus | Number of axis total: 3 | Table length: 1000 mm | Table width: 600 mm | Number of t-channels: 9 | Distance of the t-slots: 63 mm | T-channel width: 14H7 mm | Table load max.: 350 k...

    Brügg, Switzerland
  • Trusted Seller
    DMG DMU 60 T

    DMG DMU 60 T

    • Manufacturer: DMG Mori
    • Model: DMU 60

    Control: HEIDENHAIN TNC 430 | Number of axis simultaneous: 3 | Table length: 900 mm | Table width: 543 mm | Longitudinal travel (x-axis): 600 mm | Transversal travel (y-axis): 525 mm | Vertical travel (z axis): ...

    Brügg, Switzerland
  • Trusted Seller
    2006 MIKRON UCP 600

    2006 MIKRON UCP 600

    • Manufacturer: Mikron
    • Model: UCP 600
    • Noise level: 75 dB

    Control: HEIDENHAIN iTNC 530 | Time under power: 68163 Heures | Operating time: 54350 Heures | Working time: 20640 Heures | Spindle run time: 19232 Heures | Number of axis simultaneous: 5 | Table length: 320 mm ...

    Brügg, Switzerland
  • Trusted Seller
    2006 SPINNER VC-560

    2006 SPINNER VC-560

    • Manufacturer: Spinner

    Control: SPINNER-FANUC 21iMB | Number of axis total: 3 | Table length: 650 mm | Table width: 410 mm | Number of t-channels: 3 | T-channel width: 14 mm | Table load max.: 250 kg | Longitudinal travel (x-axis): 56...

    Brügg, Switzerland
  • Trusted Seller
    2011 QUASER MK603SP/12B

    2011 QUASER MK603SP/12B

    • Manufacturer: Quaser
    • Model: MK603SP12B

    Control: FANUC | Table length: 1050 mm | Table width: 550 mm | Table load max.: 300 kg | Longitudinal travel (x-axis): 1020 mm | Transversal travel (y-axis): 610 mm | Vertical travel (z axis): 600 mm | Height: 3...

    Brügg, Switzerland
  • Trusted Seller
    MIKRON VCP 710

    MIKRON VCP 710

    • Manufacturer: Mikron
    • Model: VCP 710
    • Noise level: 75 dB

    Control: HEIDENHAIN TNC 426/430 | Number of axis total: 3 | Table length: 900 mm | Table width: 600 mm | Longitudinal travel (x-axis): 710 mm | Transversal travel (y-axis): 550 mm | Vertical travel (z axis): 500...

    Brügg, Switzerland
  • Trusted Seller
    2008 GEHRING Lifehone 600

    2008 GEHRING Lifehone 600

    • Manufacturer: Gehring

    Min. diameter: 3 mm | Max. diameter: 90 mm | Max. honing length: 600 mm | Up to: 60 m/min | Total stroke: 600 mm | Voltage 50 hz 3x: 400 Volt | Machine's weight about: 2500 kg | Length: 2600 mm | Width: 2800 mm ...

    Brügg, Switzerland
2930313233

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.