Machine Tools » Bern

Search By Category

Search By Manufacturer

Building Filters

513

Used controller in Bern, Switzerland

  • Trusted Seller
    2015 STAR SR-10 J type

    2015 STAR SR-10 J type C

    • Manufacturer: Star
    • Model: SR-10J

    Control: FANUC Series 32i-Model B | Number of axis total: 7 | Number of spindles: 2 | Machining diameter max.: 10 mm | Maximum turning length: 135 mm | From: 1 t/min | Up to: 10000 t/min | Spindle power: 3.7 kW ...

    Brügg, Switzerland
  • Trusted Seller
    2016 STAR SR-10 J type

    2016 STAR SR-10 J type C

    • Manufacturer: Star
    • Model: SR-10J

    Control: FANUC Series 32i-Model B | Number of axis total: 7 | Number of spindles: 2 | Machining diameter max.: 10 mm | Maximum turning length: 135 mm | From: 1 t/min | Up to: 10000 t/min | Spindle power: 3.7 kW ...

    Brügg, Switzerland
  • Trusted Seller
    COLCHESTER COMBI 2000

    COLCHESTER COMBI 2000

    • Manufacturer: Colchester
    • Model: Combi
    • Spindle bore: 54 mm

    Control: GE Fanuc Series 210i-T | Number of axis total: 2 | Centre height: 200 mm | Distance between centres: 1250 mm | Swing over cross-slide: 246 mm | Swing over bed: 400 mm | Spindle nose: D1-6 | Spindle hole...

    Brügg, Switzerland
  • Trusted Seller
    2012 CITIZEN CINCOM K 16

    2012 CITIZEN CINCOM K 16 E V II P

    • Manufacturer: Citizen
    • Model: K16E
    • Spindle bore: 20 mm

    Control: MITSUBISHI Meldas | Number of axis total: 7 | Max. turning diameter: 16 mm | Turning length: 200 mm | Max. threading diameter: 8 M | Internal spindle diameter: 20 mm | Spindle speeds: 60000 t/min | From...

    Brügg, Switzerland
  • Trusted Seller
    HARDINGE QUEST 65 SP

    HARDINGE QUEST 65 SP

    • Manufacturer: Hardinge
    • Model: Quest
    • Spindle bore: 74.5 mm

    Control: FANUC Series 18i-TB | Swing diameter over bed: 519 mm | Spindle hole: 74.5 mm | Maximum turning length: 609.6 mm | Max. turning diameter: 228.6 mm | Bar passage: 65 mm | Longitudinal travel (z-axis): 60...

    Brügg, Switzerland
  • Trusted Seller
    2018 TORNOS DT 26/5

    2018 TORNOS DT 26/5

    • Manufacturer: Tornos
    • Model: DT26

    Control: FANUC Series 31i-Model B | Number of axis total: 5 + 2 | Number of spindles: 2 | Workpiece length max.: 195 mm | Max. bar diameter: 25.4 mm | From: t/min | Up to: 10000 t/min | Spindle power: 8.2 kW | N...

    Brügg, Switzerland
  • Trusted Seller
    BOEHRINGER / VDF DUS 560

    BOEHRINGER / VDF DUS 560

    • Manufacturer: VDF - Boehringer
    • Model: DUS560
    • Spindle bore: 82 mm
    • Noise level: 80 dB

    Control: SIEMENS | Centre height: 280 mm | Distance between centres: 1500 mm | Swing over cross-slide: 365 mm | Swing over bed: 570 mm | Spindle head: DIN 55 027 | Spindle hole: 62 mm | Spindle diameter: 80 mm |...

    Brügg, Switzerland
  • Trusted Seller
    2003 TSUGAMI-MORI BS-12CE(S)-III

    2003 TSUGAMI-MORI BS-12CE(S)-III

    • Manufacturer: Tsugami
    • Model: BS12

    Control: TSUGAMI-MORI MSC-501 (FANUC) | Number of axis total: 6 | Number of spindles: 2 | Turning diameter: 3 - 12 mm | Maximum turning length: 210 mm | Max. drilling diameter: 12 mm | Max. threading diameter: 6...

    Brügg, Switzerland
  • Trusted Seller
    2004 SCHAUBLIN 140 CNC

    2004 SCHAUBLIN 140 CNC

    • Manufacturer: Schaublin
    • Model: 140CNC
    • Spindle bore: 51 mm

    Control: GE FANUC Series 21i-TB | Number of axis total: 3 | Taper in spindle: A2-5 | Spindle hole: 51 mm | Turning diameter: 300 mm | Bar diameter with collet: 24 / 36 mm | Longitudinal travel (z-axis): 370 mm |...

    Brügg, Switzerland
  • Trusted Seller
    SCHAUBLIN 125 CCN

    SCHAUBLIN 125 CCN

    • Manufacturer: Schaublin
    • Model: 125CCN
    • Spindle bore: 28 mm

    Control: GE FANUC Series 20-T | Centre height: 125 mm | Distance between centres: 500 mm | Swing over cross-slide: 115 mm | Swing over bed: 270 mm | Spindle hole: 28 mm | Longitudinal travel (z-axis): 400 mm | T...

    Brügg, Switzerland
  • Trusted Seller
    COLCHESTER COMBI 4000

    COLCHESTER COMBI 4000

    • Manufacturer: Colchester
    • Model: Combi 4000
    • Spindle bore: 104 mm

    Control: FANUC 210i-T | Distance between centres: 2000 mm | Turning diameter over cross-slide: 370 mm | Swing over bed: 554 mm | Spindle nose: D1-11 | Spindle hole: 104 mm | Maximum turning length: 2000 mm | Lon...

    Brügg, Switzerland
  • Trusted Seller
    NC TURNING CENTER “SPINNER” TYPE

    NC TURNING CENTER “SPINNER” TYPE TM

    • Manufacturer: Spinner

    Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 live tool holders ER25 6 live tool holde...

    Biel/Bienne, Switzerland
  • Trusted Seller
    2016 DMG MORI NZX 1500/800SY

    2016 DMG MORI NZX 1500/800SY

    • Manufacturer: DMG Mori
    • Model: NZX 1500-800 SY
    • Spindle bore: 61 mm

    Control: FANUC 31iB | Number of turning spindles: 2 | Number of revolvers: 2 | Swing diameter over bed: 800 mm | Max. turning diameter: 320 mm | Max. bar diameter: 52 mm | Longitudinal travel (z-axis): 810 mm | ...

    Brügg, Switzerland
  • Trusted Seller
    TORNOS MULTIDECO 20/6b

    TORNOS MULTIDECO 20/6b

    • Manufacturer: Tornos
    • Model: Multideco 20

    Control: PNC-DECO FANUC | Number of axis total: 17 | Number of cross slides: 6 | Plain turning slide number: 5 | Longitudinal carriage way: 160 mm | Number of spindles: 6 | Number back spindle: 1 | Capacity roun...

    Brügg, Switzerland
  • Trusted Seller
    2001 TORNOS MULTIDECO 20/6

    2001 TORNOS MULTIDECO 20/6

    • Manufacturer: Tornos
    • Model: Multideco 20

    Control: PNC-DECO FANUC | Number of axis total: 18 | Number of cross slides: 6 | Plain turning slide number: 5 | Longitudinal carriage way: 160 mm | Number back spindle: 1 | Capacity round bar: 5-20 mm | Workpie...

    Brügg, Switzerland
45678

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.