Used cable in Brazil

Outdoor cable tray roll forming machine in Brazil

Cable ladder roll forming machine is commonly used for cable management in commercial and industrial construction. This intelligent roll former could produce different types of cable trays like: Solid bottom cabl...

Steel cable tray roll forming machine in Brazil

Perforated Trough Sheet Stainless Steel Galvanized Cable Tray cable pallet Track Trunking Roll Forming Machine 1. Hydraulic Decoiler with Breaking device is equipped for coil processing.2. Loading Coil Car (Optio...

1 - 3mm cable tray Roll forming machine in Brazil

A 1-3mm Cable Tray Roll Forming Machine is a specialized piece of equipment designed to efficiently produce metal cable trays from sheets of steel, typically ranging from 1mm to 3mm in thickness. Cable trays are ...

Electric stamping punch marking machine, model PE12530

Equipment: PE12530 (Electric stamping marking punch) | Marking speed: 1-180 characters/s | Marking content: Numbers, letters, common characters, symbols, graphics, bar codes, two-dimensional codes, automatic dat...

Puncionaderia pneumática de marcação, modelo PNM12530

Equipment: PNM12530 ( Pneumatic marking punching machine) | Marking speed: 1-180 characters/s | Marking content: Numbers, letters, common characters, symbols, graphics, bar codes, two-dimensional codes, automati...

Laser welding machine E1500W

Equipment: E1500W (portable fiber laser welding machine) | Laser power: 1500W | Laser source: RAYCUS | Fiber optic cable length: 10 meters | Laser wavelength: 1080nm | Laser pulse frequency: 1-20Hz | Pulse width...

2005 NARDINI DIPLOMAT LOGIC 350 FAST-TRACE

• Manufacturer: Nardini
• Spindle bore: 120 mm

Command: FAGOR 8055 | Permissible diameter on the busbar: 700 mm | Distance between ends: 2.050 mm | Admissible distance between the plate and the point: 2.020 mm | Admissible diameter over the cross slide: 420 ...

Laser welding machine E1000W

Laser power: 1000W | Laser source: RAYCUS | Fiber optic cable length: 10 meters | Laser wavelength: 1080nm | Laser pulse frequency: 1-20Hz | Pulse width: 0.1-20ms | Adjusted laser spot: 0.1-3mm | Minimum welding...

NARDINI SAGAZ

• Manufacturer: Nardini
• Spindle bore: 80 mm

Distance between ends: 1.000 mm | Permissible diameter on the busbar: 400 mm | Admissible diameter over the table wings: 740 mm | Admissible diameter over the cross slide: 642 mm | Cross car course: 434 mm | Too...

NARDINI LOGIC 250

• Manufacturer: Nardini
• Spindle bore: 80 mm

Command: Fagor 8035T | Permissible diameter on the busbar: 500 mm | Distance between ends: 1.050 mm | Admissible distance between the plate and the point: 1.020 mm | Admissible length with automatic tower: 920 m...

2000 ROMI TORMAX 30

• Manufacturer: Romi
• Model: Tormax 30

Height between tips: 205 mm | Distance between ends: 1.500 mm | Permissible diameter on the busbar: 420 mm | Admissible diameter over the table wings: 370 mm | Admissible diameter over the cross slide: 230 mm | ...

NARDINI GPRII

• Manufacturer: Nardini
• Spindle bore: 52 mm

Command: Adtec (new and with warranty) | Permissible diameter on the busbar: 440 mm | Distance between ends: 1.000 mm | Admissible diameter over the table wings: 400 mm | Admissible diameter over the cross slide...

Metal and steel engraving Pneumatic CNC Punch PMN189M

Equipment: PMN189M (Pneumatic micropunch marking) | Marking speed: 1-180 characters/s | Marking content: Numbers, letters, characters, common symbols, graphics, barcodes, 2D code, automatic date marking, lot num...

Pneumatic Marking Micro-Puncher PNM189

Equipment: PNM189 ( Pneumatic Marking Micro-Puncher ) | Marking speed: 1-180 characters/s | Marking content: Numbers, letters, characters, common symbols, graphics, barcodes, 2D code, automatic date marking, lot...

CNC pneumatic punch press – PNM189R

Equipment: PNM189R ( Pneumatic micropunch marking machine) | Marking speed: 1-180 characters/s | Marking content: Numbers, letters, characters, common symbols, graphics, barcodes, 2D code, automatic date marking...