Used Machine Tools in Hesse, Germany

Trusted Seller
AEG DWS 200/630 M
- Manufacturer: AEG
- Model: DWS 200630 M
Additional Workshop Bench Grinder Accessories Grinding wheels, 50% aluminium oxide and 60% coarse silicon carbide
Wiesbaden, Germany
Trusted Seller
REMA DS 07/200 A
- Manufacturer: Rema
- Model: DS 07200 A
Additional equipment: Used double-head grinder with built-in dust extraction. Accessories: New and slightly worn grinding wheel, spark guard, dust filter.
Wiesbaden, Germany
Trusted Seller
1990 SAV Nürnberg Delphi 1
- Manufacturer: Delphi
Additional Information Barely used, absolutely new combined universal radius and angle dressing machine with punch grinding device Accessories Various accessories Further information Dressing max. dressing radius
Wiesbaden, Germany
Trusted Seller
1983 KIRBA UG 2
- Manufacturer: KIRBA
Additional Features Used, well-maintained graver and single-edge cutter grinder on an original base with built-in dust extraction and a telescopic drawer. Accessories Electrical equipment, lighting, grinding whee...
Wiesbaden, Germany
Trusted Seller
1980 PFERD MB 12/120
- Manufacturer: PFERD
Additional Information Used pneumatic grinder, with rotary handle. Further Information Speed 12,000 rpm, power 900 W, 6 mm collet chuck, air consumption approx. 1.3 m³/min, required operating pressure 6 bar, leng...
Wiesbaden, Germany
Trusted Seller
1988 MAHO MH 800 E
- Manufacturer: Maho
- Model: MH 800
Additional Features Used CNC milling machine, equipped with a 432 CNC control system with graphics and a "half cab" Accessories Complete electrical equipment in the control cabinet mounted at the rear of the mach...
Wiesbaden, Germany
Trusted Seller
DECKEL GK 1
- Manufacturer: Deckel / Maho
- Model: DECKEL GK 1
Additional Used older engraving machine Accessories 6 mm collet and numbers and letters of your choice
Wiesbaden, Germany
Trusted Seller
1990 SUNNEN MBC-1800 - G 1113-210007
- Manufacturer: Sunnen
Control type: conventional | Freight basis: FCA | Honing: mm | Hub: mm | Tip height: mm | Total power requirement: kW | Machine weight approx.: 1 t | Space requirement approx.: 2 x 2 x 2 m
Staufenberg, Germany
Trusted Seller
HERMLE FU 710 HS 49/0
- Manufacturer: Hermle
Additional Features Used universal milling machine with manual control for longitudinal table movement Accessories Complete electrical equipment, coolant system
Wiesbaden, Germany
Trusted Seller
GEHRING P350-31P 1113-22432
- Manufacturer: Gehring
Control type: conventional | Freight basis: FCA | Honing: 4-31 mm | Hub: 350 mm | Discharge: 250 mm
Staufenberg, Germany
Trusted Seller
SCHAUBLIN Typ 53
- Manufacturer: Schaublin
Used universal milling machine, SCHAUBLIN, Type 53, Serial No. 926, year of manufacture unknown Accessories Complete electrical equipment, digital display, RSF electronics for 2 axes, cutter head, coolant system,...
Wiesbaden, Germany
Trusted Seller
JUNG RA 38
- Manufacturer: Jung
Addition: Little-used and therefore very well-preserved radius dressing device. Accessories: Racing arm RA 1, RA 2, and RA 3, 3 dressing inserts, DT 3 diamond dressing tool, 2 stops to limit the turning travel, 5...
Wiesbaden, Germany
Trusted Seller
1994 DECKEL MAHO DC 70 V 1113-6713
- Manufacturer: Deckel / Maho
- Model: DC70V
Electronic handwheel Chip conveyor Control type: CNC | Control name: Dialog 112 | Freight basis: FCA | X-off: 700 mm | Y-off: 550 mm | Z-way: 500 mm | Total power requirement: kW | Machine weight approx.: t | Spa...
Staufenberg, Germany
Trusted Seller
2004 DMG DMU60 P 1113-24019
- Manufacturer: DMG Mori
- Model: DMU 60
Machine type 5axis CNC milling machine Manufacturer DMG Type DMU 60 P
Staufenberg, Germany
Trusted Seller
2000 NAGEL SCD 200 1113-235072
- Manufacturer: Nagel
- Power requirement: 12 kW
Until now, the machine has machined the parts in a line, i.e. without interruption. Piston rods are usually machined with a gap, for which it is necessary to place the finishing stone only when the part runs unde...
Staufenberg, Germany