- Trusted Seller
WMW PS 800
- Manufacturer: WMW
This face plate has no clamping claws. It is clamped using the associated Ø 790 x 26 mm clamping disk. The clamping grooves are 300 mm long and arranged in a radial pattern. T-slots according to DIN 650: a=22mm; ...
Leipzig, Germany - Trusted Seller
WMW Niles 250x4
- Manufacturer: Niles
4 jaw chuck with flange - width of the main body 80mm - with clamping jaws for internal /external - flange size Ø 250 x 18 mm, thread 4 x M16 ; pitch circle of the bolts = Ø 170 mm Other 3- and 4-jaw chucks and f...
Leipzig, Germany - Trusted Seller
FORKARDT F+ 200x3
- Manufacturer: FORKARDT
Flange mounting Ø 185 mm; size Ø 200 x 25 mm, pitch circle Ø 132 mm, bolt size Ø 21mm x / M12, through-hole Ø 105mm conical Jaw connection FBG 200 Clamping range of the jaws max. Ø 200mm with chuck key incl. 26 s...
Leipzig, Germany - Trusted Seller
Röhm KFD-F-EC 400/3 (Nr.35)
- Manufacturer: Röhm
Merkmale: automatisches spannen Kraftspannfutter Flanschaufnahme Ø 298 x 32mm Fmax: 110 kN Fges. 250 kN 6 Formbacken
Leipzig, Germany - Trusted Seller
WMW PS 1000
- Manufacturer: WMW
Equipment: -4x external/internal jaws; clamping travel approx. 200mm; clamping range max; approx. Ø 900mm / min. approx. Ø 100mm. -clamping flutes size according to DIN 650: a=22mm; h=43mm; b=40mm; c=16mm x lengt...
Leipzig, Germany - Trusted Seller
WMW 600x3
- Manufacturer: WMW
3-jaw chuck with internal jaws flange Ø 730 x 10mm (pitch circle bore Ø 680mm) 1 set of external jaws 1x chuck key
Leipzig, Germany - Trusted Seller
ALLMATIC NC high-pressure clamps
- Manufacturer: ALLMATIC
NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 used, tested !
$873 USDZschepplin, Germany - Trusted Seller
ALLMATIC NC high-pressure clamps
- Manufacturer: ALLMATIC
NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 including one set of stepped jaws ! used, tested !
$989 USDZschepplin, Germany - Trusted Seller
PAGUS pipe vice
- Manufacturer: Pagus
Pipe vice, round material vice PAGUS with stop, max 250 mm jaws rotatable ! used, tested ! very good condition !
$640 USDZschepplin, Germany - Trusted Seller
ALLMATIC NC high-pressure clamps
- Manufacturer: ALLMATIC
NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 used, tested !
$873 USDZschepplin, Germany - Trusted Seller
ALLMATIC NC high-pressure clamps
- Manufacturer: ALLMATIC
NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 including one set of stepped jaws ! used, tested !
$989 USDZschepplin, Germany - Trusted Seller
PST 1,3
- Manufacturer: PST
3 chip containers (blue) type PST; capacity = 0.6 m³ Tipping angle approx. 45° for emptying Base frame size 1000mm x 1000mm x 180mm Sheet metal construction 8 mm thick 4 eyebolts for crane lifting
Leipzig, Germany - Trusted Seller
TARGET PRECISION micro drill
- Manufacturer: TARGET PRECISION
Micro drill, head drill, drill, 50 pieces TARGET PRECISION Series 100 Other quantities on request! New!
$640 USDZschepplin, Germany - Trusted Seller
IND-SPHINX® micro drill
- Manufacturer: Pagus
Micro drill, drill, 50 pieces IND-SPHINX® PRECISION LIMITED D8352 D8352008001050000 New!
$675 USDZschepplin, Germany - Trusted Seller
SANDVIK drill
- Manufacturer: Sandvik
Delta drills with internal cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Used!
$279 USDZschepplin, Germany
Tip: Enter manufacturer, model or keyword