Used Machine Tools in Saxony, Germany

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 including one set of stepped jaws ! used, tested !

Forkardt KS 400 (Nr. 45)

• Manufacturer: Forkardt

Power chuck, mechanical Features: Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø ...

WMW PS 300

• Manufacturer: WMW

technical features: - 4 jaw chuck, manual feed, clamping range: outside= max. Ø 280mm as well as inside=min. Ø 40mm

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drill, drill, 10 pieces IND-SPHINX® PRECISION LIMITED Type 100 10000023000900000 Ã2.30x9.00mm Other quantities on request! New!

IND-SPHINX® micro drill

• Manufacturer: IND-SPHINX

Micro drill, drill, 12 pieces IND-SPHINX® PRECISION LIMITED Type 3835 ( D835 ) D8350026001050000 Ã2.60x10.50mm New!

EURO CIPEL Micro Drill

• Manufacturer: EURO CIPEL S.A.

Micro drills, head drills, drill bits, 35 pieces EURO CIPEL S.A. 0/D3500/L120 /HP01/T526/O /FA 906310/025/ Other quantities on request ! New !

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drills, drills, 45 pieces IND-SPHINX® PRECISION LIMITED D5463 D5463008000850000 Ã0.80x8.50mm Other quantities on request! New!

1999 TOS- TRENCIN FNG

• Manufacturer: TOS

Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25m...

WMW AW1000x800x640

• Manufacturer: WMW

clamping surface is roughly machined good used condition, slight traces of use T-slots according to DIN 650: a=28mm; b=49mm; c=21mm; h=50mm distance T-slot : T-slot= 160mm

WMW AW 1020x810

• Manufacturer: WMW

Drill cube material made of cast steel. Surface with strong drill inclusions. T-slots according to DIN 650 - Vertical clamping surface: LxD: 1020 x 625mm - Horizontal clamping surface: LxW: 1020 x 810mm

J+P pneumatic punch

Pneumatic punch press J+P, JAGOW + PFEIFER GmbH STZ-KO Used, tested!

VAN MARK cooling slot punch

Cooling slit punch, Slit punch, Hand lever punch VAN MARK PRODUCTS CORPORATION TRIM-A-LOUVER used, tested !

WMW AW 330x310

• Manufacturer: WMW

Application: Machine table adjustable clamping angle with 3 T-slots according to DIN 650: a=17; H027; b=32; c=14mm distance 100mm swivelling via tooth guide +90° rotatable 360° Base Ø 350mm with 2x clamping groov...

METAKON drilling machine

• Manufacturer: METAKON

Valve hole drilling machine METAKON VM-01 Machine was used for drilling valve holes in motorcycle rims. retract, drill, advance with laser pointer ! 380 V Documents available. used, tested ! Video:

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 848 0.5 kW 1240 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!