Machine Tools » Germany

Search By Category

Search By Manufacturer

Search By State

Building Filters

5017

Used processing in Germany

  • Trusted Seller
    1975 L.A.S.A. MONTRAGON LR 6

    1975 L.A.S.A. MONTRAGON LR 6 200 DL

    • Manufacturer: L.A.S.A. MONTRAGON
    • Power requirement: 7.5 kW

    Inside of the machine is a coil taper integrated, whcih can be adjusted via threaded spindle. description: - upper roll : width:160mm, dia. approx. 40mm, not driven, via manual adjustment - lower roll: width: 160...

    Leipzig, Germany
  • Trusted Seller
    1990 ANTRIM HYDRAULICS Embosing Press

    1990 ANTRIM HYDRAULICS Embosing Press

    • Manufacturer: ANTRIM HYDRAULICS
    • Power requirement: 12 kW

    Embossing - Hot Embossing application area: - for example: for foils, plastics, paper, hardboard materials etc. - stamp plate size: 600x310mm equipment: - counter - hydr. tank Accessories: - Mounting plate (600x3...

    Leipzig, Germany
  • Trusted Seller
    2010 PROFILE STACKER

    2010 PROFILE STACKER

    • Manufacturer: Herrmann + Hieber

    ALUMINIUM PROFILES Qty. 1 Second-hand profile stacker unit - already dismantled & in storage Mfc.: Herrmann + Hieber, Built: 2010, Dismantled and put into storage: 2017 Application: The unit was integrated in the...

    Friedrichsdorf, Germany
  • Trusted Seller
    1991 MUHR & BENDER (MUBEA)

    1991 MUHR & BENDER (MUBEA) B0 32

    • Manufacturer: Mubea

    -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories!

    Leipzig, Germany
  • Trusted Seller
    2004 Peddinghaus Hydraulic 1001

    2004 Peddinghaus Hydraulic 1001

    • Manufacturer: Peddinghaus
    • Model: 1001
    • Power requirement: 7.5 kW

    hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm ...

    Leipzig, Germany
  • Trusted Seller
    1960 STÖLTING RA

    1960 STÖLTING RA

    • Manufacturer: STÖLTING
    • Power requirement: 4 kW

    Mechanical 3-roll plate bending machine Operation: Hand switch / foot switch forward/backward 2x EMERGENCY button

    Leipzig, Germany
  • Trusted Seller
    1981 Strojarne Piesok XZP 100/12

    1981 Strojarne Piesok XZP 100/12

    • Manufacturer: ESPE/Piesok
    • Model: XZP 10012
    • Power requirement: 15.1 kW

    The profile round bending machine can be used for bending thick-walled steel profiles, steel beams and steel rails. The machine works on two gears: 0-4 rpm and 0-6,5 rpm. - 1x driven bending roller can be adjuste...

    Leipzig, Germany
  • Trusted Seller
    1995 L.A.S.A. RH 16-200

    1995 L.A.S.A. RH 16-200

    • Manufacturer: L.A.S.A.
    • Power requirement: 5.5 kW

    description: - upper rolls adjustable around 14mm, not driven - lower rolls not adjustable, driven - each 1 intake/output roll (dia 35x410mm) equipment: - drum intake (L:1,2xW:0,7xH:1,16m), with 4 pcs rolls and g...

    Leipzig, Germany
  • Trusted Seller
    1980 NICHT BEKANNT 23N/8

    1980 NICHT BEKANNT 23N/8

    • Manufacturer: NICHT BEKANNT

    Punching Press Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Punching cross section in mm²: 45 kp/mm² | Table-size: 120x100 mm | Throat: 80 mm | Weight...

    Leipzig, Germany
  • Trusted Seller
    1995 SAMCO CTH-201

    1995 SAMCO CTH-201

    • Manufacturer: Samco
    • Power requirement: 5 kW

    Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec...

    Leipzig, Germany
  • Trusted Seller
    2004 TRACTO-TECHNIK Tubotron 20 CNC

    2004 TRACTO-TECHNIK Tubotron 20 CNC

    • Manufacturer: Tracto-Technik
    • Power requirement: 15 kW

    Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Acce...

    Leipzig, Germany
  • Trusted Seller
    1985 KAISER V 40

    1985 KAISER V 40

    • Manufacturer: Kaiser
    • Power requirement: 15.2 kW

    40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic

    Leipzig, Germany
  • Trusted Seller
    EOC nicht bekannt

    EOC nicht bekannt

    • Manufacturer: EOC
    • Power requirement: 0.55 kW

    HYDRAULIC LINE PRESETTING DEVICE for EO pipes Application for crimping flared fittings on hydraulic lines. Crimping of common raw materials such as steel (ST 35.4 NBK and-or ST 37.4 NBK and-or ST 52.4 NBK), stain...

    Leipzig, Germany
  • Trusted Seller
    WMW WBB 2300

    WMW WBB 2300

    • Manufacturer: WMW
    • Power requirement: 9 kW

    Steel frame double T beam welded top roller: with running; adjustment= length 150mm via hand toggle; support block can be folded out for opening side rollers: motor driven; adjustment=fixed

    Leipzig, Germany
  • Trusted Seller
    2011 Schwarze Robitec CNC 60

    2011 Schwarze Robitec CNC 60 TB MR

    • Manufacturer: Schwarze-Robitec
    • Power requirement: 55 kW

    This is an automatic pipe cold bending machine. Multiple radii can be bent. Radius differences freely programmable via CNC control up to 6 levels. Pipe positioning device in NTB design Pipe diameter: min. Tube Ø ...

    Leipzig, Germany
  • no-image_en.png

    Kaltenbach KF Beam & Profile Processing Line

    • Manufacturer: Kaltenbach
    • Model: KF

    Good condition Kaltenbach KF Beam & Profile Processing Lines manufactured in 2011. Located in Germany and other countries. Click request price for more information.

    Germany
1617181920

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.