- Manufacturer: Safan
this safan smk-l 40-2550 ts1 bending machine from 1996 has a production record of 30000 working hours. this mechanical pressbrake operates at high speed between 20 and 90 mm/s through a safan nc control unit and ...
magnetic table 255 x 130 mm manual feeds table: 470 x 160 mm | -wheel cross: 150 mm | -wheel vertical: 350 mm | -table longitudinall: 310 mm
drilling machine strands - swedish transmission machine - syötöllinen model, the supply will not turn on - manual work - vise according to new not abroad, this must not from us! purchase - sale - shift
drilling machine strands - proper gear machine - swedish - manual feed - vise new not abroad, this must not from us! purchase - sale - shift
the danish-made gear machine cone mk 3 speeds to eight pieces (100-2800 1 / min) -table 535x335mm trial agreement, -only calls!
- Manufacturer: Edge
open time: 10 july 2017 09:00 am et / close time: 1 september 2017 07:00 am et polymac 'single 89 n' edge banding machine machine number 736, edge banding unit with pneumatic cutting device, trimming unit, front ...
WEEKE 'POWERLINE BST 100' Throughfeed Drilling and Boring Machine Machine number 0-251-10-0809 HKT--AEU431199
- Manufacturer: Weeke
open time: 10 july 2017 09:00 am et / close time: 1 september 2017 07:00 am et weeke 'powerline bst 100' throughfeed drilling and boring machine machine number 0-251-10-0809, 5 drilll supports each with 2 drill h...
- Manufacturer: Aliko
almost unused because of production change cnc-controlled (backgauge, gab, cutting angle) sheet support backside weigth 62 t
a functional russian drilling rig with 5 cones, spindle leak slightly. altitude of 3 meters, experiment with use possibility. inquiries: 0400973511
- Manufacturer: Amada
this amada hfb 80-25 bending machine from 1998 has a production record of 26725 working hours. this solid machine is equipped with an amada operateur control unit with floppy interface and stands in a very good c...
- Manufacturer: MORGARDSHAMMAR
morgardshammar 19.35' x 27.88' (5.9m x 8.5m) pebble mill (to be modified for sag mill duty) with 2 x 1400 kw (2 x 1877 hp) motors
- Manufacturer: Stenner
band resaws stenner st100 r used machine resaw stenner st100 r, year 2014 st100r resaw 915 mm with spindle wheels rotating counter clockwise. the width of the sawblade can be 100 mm. year 2014 running hours: 2351...
Get email updates for machine tools