Machine Tools » Flanders

Search By Category

Search By Manufacturer

Building Filters

677

Used controller in Flanders, Belgium

  • Trusted Seller
    Polypal Rollforming line for pallet

    Polypal Rollforming line for pallet racks (1)

    • Manufacturer: Polypal

    Used for manufacturing part 1: the horizontal support, light version with two hooks on each side: 250 x 1,5 mm Line consists out of: 1 - Dimeco decoiler 2 - Dimeco straightener 3 - Dimeco CNC microfeeder 4 ...

    Deinze, Belgium
  • Trusted Seller
    Dimeco decoil./ straight/ feeder LVD

    Dimeco decoil./ straight/ feeder LVD punchpress

    • Manufacturer: Dimeco

    This line was used to prepare/press the inner linings of fluorescent lighting fixtures. 1 - Dimeco decoiler 2370 DV (driven) - max width: 550 mm - with controlbox 2 - Dimeco 1675/D straightener with CNC fee...

    Deinze, Belgium
  • Trusted Seller
    no-image_en.png

    Pegard AF11 X:3000 - Y:1250 - Z:1800mm

    • Manufacturer: Pegard

    tabledimensions: 3000 x 1400 mm Ballscrews are used for all moving directions = easy conversion to CNC with digital readout lot's of tool included spindledia: 110 mm weight: 30 ton

    Deinze, Belgium
  • Trusted Seller
    Akyapak APK 101

    Akyapak APK 101

    • Manufacturer: Akyapak
    • Model: APK 101

    max sectie cm3: 45 80 • Stalen (St-52) constructiecarrosserie • De rollen worden aangedreven door een hydraulische motor, planetaire tandwielkast en tandwielen. • De assen zijn gemaakt van speciaal staal, gehard...

    Deinze, Belgium
  • Trusted Seller
    Meba Eco-line 320 DGA automatic

    Meba Eco-line 320 DGA automatic

    • Manufacturer: Meba

    Volledig automatische lintzaag met bundelklem en automatische invoer CNC gestuurde hoekpositionering werkstukbreedte in bundelklem: 0-300 mm werkstukhoogte in bundelklem: 5-300 mm enkele materiaaltoevoerlengte: 0...

    Deinze, Belgium
  • Trusted Seller
    Pegard 6055-AF16SMM

    Pegard 6055-AF16SMM

    • Manufacturer: Pegard
    • Spindle bore: 160 mm

    Type: 6055-AF16SMM Frezen, boren en draaien! Longitudinale X-beweging van de kolom: 9000 mm Kruis Y-beweging of kolom: 650 mm Verticale Z-verplaatsing of freeskop: 3000 mm Horizontale W-verplaatsing of freeskop: ...

    Deinze, Belgium
  • Trusted Seller
    Dimeco decoil./ straight LVD punchpress

    Dimeco decoil./ straight LVD punchpress + rollforming

    • Manufacturer: Dimeco

    This line was used to prepare/press the inner linings of fluorescent lighting fixtures. 1 - Dimeco double head decoiler 2372/DM (driven) - width: 550 mm - 2x 2000 kg 2 - Dimeco 1675/D straightener with CNC ...

    Deinze, Belgium
  • Trusted Seller
    Müller Opladen 3D profile cutting

    Müller Opladen 3D profile cutting

    • Manufacturer: Muller

    RB 650-1200 AGD 5-axis simultanous gas-cutting (plasma) for tubes min/max workpiece dia through chuck : 80/650 mm min/max workpiece dia: 650 1200 mm diameter range of oscillation: 80 1200mm chuck speed in manu...

    Deinze, Belgium
  • Trusted Seller
    Shears for corrugated sheets

    Shears for corrugated sheets

    • Manufacturer: Bombled

    Machine type: Hydraulic shear for corrugated sheets Manufacturer: Bombled Model: 9F Max cutting capacity: 2000 mm (width) × 4 mm (thickness) Drive system: Hydraulic Operator protection: Front safety guard F...

    $7,191 USD

    Get financing

    Est. $141/mo

    Deinze, Belgium
  • Trusted Seller
    Kasto HBA a 8x10 CNC

    Kasto HBA a 8x10 CNC

    • Manufacturer: Kasto
    • Model: HBA A

    zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantranspo...

    Deinze, Belgium
  • Trusted Seller
    2004 HOLZMA HPL 510/56/22/L/X Automatic

    2004 HOLZMA HPL 510/56/22/L/X Automatic panel sizing beam saw

    • Manufacturer: Holzma

    Automatic panel sizing beam saw with rear lifting table Max panelsizes when rear loading: 5600mm x 2240mm Max. cutting length x width: 5600 x 5600 mm. Max. stack weight for the lift: 10 ton max stack height 580 m...

    Kortrijk, Belgium
  • Trusted Seller
    Voortman V550A flat and angle

    Voortman V550A flat and angle processing machine

    • Manufacturer: Voortman

    - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm breedte/dikt...

    Deinze, Belgium
  • Trusted Seller
    30T Hydraulic Pressbrake

    30T Hydraulic Pressbrake

    • Manufacturer: Colly

    Machine type : Hydraulic press brake Model : 301 B Manufacturer : Colly Bending force : 30 tons Max pressure : 220 kg/cm² Ram stroke : 100 mm Hydraulic unit type : 6YF61612 Motor power : 5 HP (≈ 3.7 kW) V...

    $4,794 USD
    Deinze, Belgium
  • Trusted Seller
    Horizontal Bandsaw, Dual-Column

    Horizontal Bandsaw, Dual-Column

    • Manufacturer: Behringer
    • Model: HBP 313

    Machine type : Horizontal bandsaw, dual-column Manufacturer : Behringer Model : HBP 313 Serial number : 10009454 Year of construction : 2016 Cutting capacity (round) : Ø 310 mm Cutting capacity (rectangular...

    $10,787 USD

    Get financing

    Est. $212/mo

    Deinze, Belgium
4243444546

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.