Machine Tools » Hamburg

Building Filters

72

Used processing in Hamburg, Germany

  • 2011 Trumpf Laser 3030 Lean

    2011 Trumpf Laser 3030 Lean Edition-

    • Manufacturer: Trumpf

    Laser with two cutting heads 2 TruTops licenses plus fees for registering a change of ownership = €10,999 additional Software does not need to be purchased separately. The machine has always been verifiably servi...

    Hamburg, Germany
  • 2003 Prussiani Oceania-

    2003 Prussiani Oceania-

    • Manufacturer: Prussiani

    CNC machining center 4 +1 axes Tiltable head by 15 degrees Angle for head for 300mm saw blade up to 360° More used machines at: www.janssen-usedmachines.com New stone processing machines: www.janssen-steintechnik.de

    Hamburg, Germany
  • 2002 CMS Brembana- SPEED 3-

    2002 CMS Brembana- SPEED 3-

    • Manufacturer: Brembana

    4-axis CNC machining center X-axis travel 3,800 mm Y-axis travel 2,350 mm Z-axis travel 600 mm Motor speed 15,000 rpm Cones and suction cups More used machines at: www.janssen-usedmachines.com New stone processin...

    Hamburg, Germany
  • 2011 CMS Brembana Maxima-

    2011 CMS Brembana Maxima-

    • Manufacturer: Brembana

    CNC 5-axis machining center Spindle 30 KW, spindle renewed 07-2024 X-axis 3,800 mm Y-axis 5,000 mm Z-axis 1,400 mm Steel foundations Easy Stone software More used machines at: www.janssen-usedmachines.com New sto...

    Hamburg, Germany
  • 2005 WATERJET DYNAMICS-

    2005 WATERJET DYNAMICS-

    • Manufacturer: Waterjet

    CNC waterjet cutting system, 3-axis, usable working dimensions: 3,100 x 2,000 mm, complete with software. Power: 60 hp. New control panel, updated software, pump overhauled. More used machines at: www.janssen-use...

    Hamburg, Germany
  • 2017 CMS Brembana Tecnocut Idroline

    2017 CMS Brembana Tecnocut Idroline S 5X-

    • Manufacturer: Brembana

    Waterjet Tecnocut Idroline S, 5-axis head Pump 34 KW, Greenjet EVO Usable cutting dimensions: 4,000 x 2,000 mm Complete with excavator for sludge removal Software is included Operating hours: around 8,500 More us...

    Hamburg, Germany
  • 2010 Waterjet Suprema-

    2010 Waterjet Suprema-

    • Manufacturer: Waterjet

    Suprema 510/50/s/ waterjet 4,000 working hours Regularly serviced Machine in very good condition 3 axes Working area 3,350 x 1,850 x 160 mm KMT pump 37 kW, 50 hp More used machines at: www.janssen-usedmachines.co...

    Hamburg, Germany
  • 2013 Breton Countur Five NC

    2013 Breton Countur Five NC 700 HD

    • Manufacturer: Breton

    CNC machining center with 5-axis head Tool magazine 27 positions Engine power S6 HP 30 Maximum saw blade diameter 800 mm More used machines at: www.janssen-usedmachines.com New stone processing machines: www.jans...

    Hamburg, Germany
  • 1991 Omec FSU/600 ACG

    1991 Omec FSU/600 ACG

    • Manufacturer: Omec
    • Model: FSU600 ACG

    Automatic profile milling machine with template scanning Blade diameter approx. 60cm, 380V, 50Hz Operating hours approx. 2000h Other accessories: lathe, various saw blades More used machines at: www.janssen-usedm...

    Hamburg, Germany
  • 2017 Waterjet Corporation Suprema

    2017 Waterjet Corporation Suprema

    • Manufacturer: Waterjet Corporation

    CNC waterjet machine with 5-axis head The machine has only run for 662 hours and is in almost new condition. The programming software is from "Igems." The sand storage tank has been enlarged to approximately 2 cu...

    Hamburg, Germany
  • Omag Mil 98

    Omag Mil 98

    • Manufacturer: Omag

    3-Axis CNC Machining Center Partially operational or as a spare parts donor The machine is in used condition - the hydraulic unit, inverter, and spindle are working. The computer's hard drive is defective - the m...

    Hamburg, Germany
  • 2015 Intermac Master 850

    2015 Intermac Master 850

    • Manufacturer: Intermac

    CNC machining center/CNC bridge saw 60-tool magazine Saw blade included Bsolid CAD/CAM software Machine equipped with deposition tools, drain, and drums for straight edges Vacuum cleaner included More used machin...

    Hamburg, Germany
  • 2013 FLOW Mach3 4020b-

    2013 FLOW Mach3 4020b-

    • Manufacturer: Flow

    CNC waterjet cutting system 5-axis head Working dimensions: 4,000 x 2,000 mm Motor power: Flow Hyplex 30 HP high-pressure pump, model HP 30 System installed in January 2014 Voltage: 400 Hz 50 V More used machines...

    Hamburg, Germany
  • Trusted Seller
    2012 KRAUSS MAFFEI Stanzvorrichtung TrimStar

    2012 KRAUSS MAFFEI Stanzvorrichtung TrimStar 250kN

    • Manufacturer: Krauss-Maffei

    The Stanzvorrichtung TrimStar 250kN is a high-performance stamping machine designed for precision and efficiency in manufacturing processes. This machine is tailored for heavy-duty applications, particularly in t...

    Hamburg, Germany
  • 2020 GMM TECHNI WATERJET Intec

    2020 GMM TECHNI WATERJET Intec 713 G2

    • Manufacturer: Techni

    Waterjet cutting machine with 5 x head Cutting capacity: 4000 x 2000 mm (vertical cut) 3680 x 1640 mm (45° cut) Pump: Techni 37 kW, 4000 bar Cutting head: Angle cut up to 50° Software: GMM TECHNI WATERJET Standar...

    Hamburg, Germany
12345

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.