Used controller in Hidalgo, Mexico

MORI SEIKI CL-203

• Manufacturer: Mori Seiki

1999 MORI SEIKI CL-203 CNC LATHE * 18" SWING PLATFORM * MAXIMUM SWING DIAMETER OF 12" *MAXIMUM WORKING LENGTH OF 12" * 2" BAR CAP, 3500 RPM * 9.25" CROSS SLIDE TRAVEL * LONGITUDINAL TRAVEL OF 14.6" * 472/590 IPM,...

HAAS VF2-B CNC

• Manufacturer: Haas
• Model: VF-2B
• Spindle taper: CAT 40

HAAS VF2-B CNC X-axis travel: 30" Y Axis Travel: 16" Z axis travel: 20" Fast Rate X Axis: 1000 IPM Fast rate Y axis: 1000 IPM Fast speed Z axis: 1,000 IPM Maximum load of board: 3,000 LBS Spindle motor: 20 HP Spi...

HAAS SL-40 CNC

• Manufacturer: Haas
• Model: SL-40
• Spindle bore: 100 mm

HAAS SL-40 CNC TURNING CENTER. - DATE 2001 - 15" 4-JAW HYDRAULIC CHUCK, - 10-POSTION TOOL TURRET, TOOLEYE, HENNIG - 12" CHIP CONVEYOR, - HAAS CNC CONTROLS, , 208/230V 50/60HZ - 3PH.

MORI SEIKI SL-65 MC

• Manufacturer: Mori Seiki
• Model: SL-65MC

* MORI SEIKI CNC LATHE * MODEL: SL-65MC * FANUC CONTROL * FLAWLESS * BAR PASSAGE 6.5” * LIVING TOOLS * LOCATED IN TULANCINGO HIDALGO. * SALES 5515898591

2014 HAAS ST-25 Y

• Manufacturer: Haas
• Model: ST-25Y

OKUMA CAPTAIN L370MW

• Manufacturer: Okuma
• Model: Captain L370
• Spindle bore: 52 mm

Technical Specifications: Center spacing: 14.57" Maximum turning diameter: 9.84" X-axis travel: 5.91" Z-axis travel: 14.57" Maximum spindle speed: 5,000 rpm Spindle power: 10 hp Bar pitch: 1.57" Turret: 8 station...

TRAK CNC MILLING MACHINE

• Manufacturer: TRAK

TRAK MILLING MACHINE - Table Capacity: 50" x 10" - X/Y/Z Travel: 31.5" * 17" x 25.5" - Spindle Taper: #40 - Spindle Motor: 5 HP - Spindle Speed Range: 40-600 RPM (Low) & 300-5000 RPM - (High) - X/Y Rapid ...

HAAS ST-20 Y

• Manufacturer: Haas
• Model: ST-20Y
• Spindle bore: 38 mm

TECHNICAL SPECIFICATIONS – HAAS ST-20Y • CHUCK SIZE: 8.3″ • BAR CAPACITY: 2.5″ • MAXIMUM TURNING DIAMETER: 21.0″ • MAXIMUM CUTTING DIAMETER (WITH BMT65 TURRET): 11.75″ • MAXIMUM CUTTING LENGTH: 22.5″ • X-AXIS TRA...

HAAS VF2 CNC

• Manufacturer: Haas
• Model: VF-2
• Spindle taper: BT 40

HAAS VF-2 CNC 36”x14” TABLE COURSES X30”, Y16”, Z20” 20HP ENGINE CAT 40 CONE YEAR 1998

HAAS SL-30 CNC LATHE

• Manufacturer: Haas
• Model: SL-30
• Spindle bore: 76.2 mm

HAAS SL-30 CNC LATHE FLIP: 30" BAR PITCH: 3" TOOL HOLDER: 12 YEAR: 2006 BURR REMOVAL “NO CONTRA POINT”

OKAMOTO ACC 8-20 DXNC

• Manufacturer: Okamoto
• Model: ACC-8-20

OKAMOTO ACC8-20DXNC GRINDING MACHINE WITH FANUC CONTROL WORK SURFACE (WIDTH X LENGTH): 8” X 20” TABLE SIZE: 8.2” X 21.5” LENGTH TRAVEL: 22” CROSS TRAVEL: 9” VERTICAL TRAVEL: 13.5” TABLE FEED SPEED: 16 – 82 FT/MI...

MORI DMG CL2000

• Manufacturer: DMG Mori
• Model: CL 2000

DMG MORI CL200B CNC LATHE Standard turning diameter 7.7” Maximum turning length14.2” Chuck size 8” Bar capacity 2.5” Spindle motor (HP)10/15 HpV Spindle speed 3500 RPM CNC Control TypeMitsubishi Turret capacity 1...

BT40, CAT40, and CAT50 Cone Organizer

• Manufacturer: WESTON

WESTON TOOL HOLDER ORGANIZING CART (CNC TYPE) APPROXIMATE DIMENSIONS: 36” LENGTH × 18” WIDTH × 35” HEIGHT STORAGE CAPACITY: UP TO 48 CAT40, BT40, CAT50 TYPE TOOL HOLDERS USE: STORAGE AND TRANSPORTATION OF CNC ...

HAAS VF1 CNC

• Manufacturer: Haas
• Model: VF-1
• Spindle taper: CAT 40

HAAS CNC VERTICAL MACHINING CENTER MODEL VF-1 *CNC HASS * 26" X 14" TABLE SIZE * TRAVEL (X AXIS) 20" TRAVEL (Y AXIS) 16" TRAVEL (Z AXIS) 20" * CAT 40 SPINDLE CONE * NUMBER OF TOOLS IN THE ATC 20 * PREPARATION FO...

HAAS VF3 CNC

• Manufacturer: Haas
• Model: VF-3
• Spindle taper: CAT 40

Haas CNC vertical machining center model VF-3 * Main motor 20 HP, * High speed spindle 10 thousand RPM * Programmable coolant nozzle * Table 48 x 18 inches *32 station automatic tool changer, * Year 99 * Stroke o...