Used Machine Tools in Bavaria, Germany

Trusted Seller
Banding machine, pallet labeling
- Manufacturer: AETNA Group
Additional title: Roboband / Logomatic | Capacity: 150 paletts / h | Power: 5,5 kW | Current: 10 A | Voltage: 400 Volt | Frequency: 50 Hz | Weight: 1700 kg
Freising, Germany
Trusted Seller
Auction
IBERIMEX T6 Lead and Pull Spindle Lathe
3-jaw chuck RÖHM
Huisheim, Germany
Visit Auction Website
Thread cutting machine Ridgid 535
- Manufacturer: Ridgid
Used Ridgid 535 threading machine Accessories: 1 set of 1/2" - 3/4" dies 1 set of 1" - 2" dies Manual cutting head Machine untested, in its current condition, i.e., we will not overhaul the machine!
Hohenbrunn, Germany
Auction
1997 AMADA GPX 1230 Hydraulic CNC Guillotine Shear
- Manufacturer: Amada
- Model: GPX-1230
Cutting capacity 12 mm steel sheet, cutting length 3000 mm
Bad Heilbrunn, Germany
Visit Auction Website
1999 Wuko installation machine
- Manufacturer: Wuko
Used and well-maintained Wuko double-sided erector with cross shear (without meter counter), machine with red motor, The machine has been professionally repaired, inspected, and cleaned and is fully functional....
Hohenbrunn, Germany
Trusted Seller
Auction
JESSY - Studturn 1430 - 2016 - Lead and pull spindle lathe
JESSEY STUDTURN 1430 VS – Lathe * Manufacturer: JESSEY * Model: Studturn 1430 VS * Year of Make: 2016 * Serial Number: 8901 * Digital display: VOLZ Type L (2-axis) * Spindle speed max.: 2500 rpm * Operating volta...
Huisheim, Germany
Visit Auction Website
Trusted Seller
ZIMMER BMS 32
- Manufacturer: Zimmer
- Model: BMS 32
- Throat depth: 210 mm
- Power requirement: 0.75 kW
Standard equipment: - Number of speed ranges 9×2 steps - Coolant device in the machine base - Movable LED machine light - Swivel work table with integrated machine vice on the opposite side opposite side with jaw...
Günzburg, Germany
Trusted Seller
Auction
VÖST-ALPINE - DA 160 - Lead and Pull Spindle Lathe
- Manufacturer: Voestalpine
Gearbox was removed because a gear wheel was replaced Gearbox must be installed by the buyer
Huisheim, Germany
Visit Auction Website
Trusted Seller
Auction
MIYANO - BNC-42C 5 - 2012 - CNC lathe
- Manufacturer: Miyano
- Model: BNC42
- Spindle bore: 42 mm
Bar passage: 42mm Maximum workpiece length: 150 mm (5.9 inches) Maximum speed: 5,000 rpm Spindle motor: 7.5 kW Control: CNC Fanuc Tool magazine: 8 positions Bar feeder: FMB 542 Turbo - 3000 mm Bar diameter: 5 - 4...
Huisheim, Germany
Visit Auction Website
Trusted Seller
Auction
WEIPERT - WG 480 - 1960 - Lead and Pull Spindle Lathe
- Manufacturer: Weipert
Documents available
Möttingen, Germany
Visit Auction Website
Trusted Seller
Auction
2016 OPTIMUM SD 280V Horizontal Band Saw Machine for Metal
- Manufacturer: Optimum
With material roller table 3,000 mm lg, 400 mm wide, coolant device
Munich, Germany
Visit Auction Website
Trusted Seller
Auction
EMCO - Maximat V 13 - 1987 - Lead and tension spindle lathe
- Manufacturer: Emco
EMCO - Maximat V 13 - 1987 - Lead and tension spindle lathe
Huisheim, Germany
Visit Auction Website
Trusted Seller
MAXION UNIMAX 3T TAP
- Manufacturer: Maxion
- Throat depth: 260 mm
- Drilling diameter: 25 mm
Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Tapping capacity M20 Spindle MK3 Drilling depth 125 mm throat depth 260 mm Spindle/table 90 to 840 mm Table surface 500 x 365 mm Total he...
Günzburg, Germany
Trusted Seller
ALZMETALL Alzstar 40/SV
- Manufacturer: Alzmetall
- Model: ALZSTAR 40SV
- Throat depth: 293 mm
Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload pro...
Günzburg, Germany
Trusted Seller
ALZMETALL Alzstar 40/SV
- Manufacturer: Alzmetall
- Model: ALZSTAR 40SV
Control: conventional - | Storage location: Factory | Freight basis: Delivery ex works. | Threading in st 60: M24 | Threading in gg 20: M30 | Short spindle: MK 3 | Center of spindle to wall or column: 293mm | Sp...
Günzburg, Germany