Used Machine Tools in Saxony, Germany

EURO CIPEL Micro Drill

• Manufacturer: EURO CIPEL S.A.

Micro drills, head drills, drill bits, 35 pieces EURO CIPEL S.A. 0/D3500/L120 /HP01/T526/O /FA 906310/025/ Other quantities on request ! New !

1994 WMW 620x160

• Manufacturer: WMW

4 jaws faceplate flange intake/diameter : passage drill hole 160 mm flange diameter 197mm hole circle 235mm jaws are single guided with chuck key The given info are approx. values!

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

ORTLINGHAUS mechanical clutch

• Manufacturer: ORTLINGHAUS

mechanical clutch ORTLINGHAUS CLUTCHES serial no. 89-15483 with thrust bearing and additional shift ring New !

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

Tool milling machine TOS FN 20

• Manufacturer: TOS

Table size [mm]: 600 x 240 Tool holder: SK 40 Speed range [1/min]: 50 - 2500 Travel [X / Y / Z mm]: 300 / 200 / 350 Equipment / accessories: Vertical head with quill, counter bearing

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRDA250x3 ) Jaws individually adjustable by toothing ! with accessories ! used, tested !

Stimin FUS 32 tool milling machine

Table size [mm]: 950 x 450 Tool holder: SK 40 Speed range [1/min]: 25 - 2000 Equipment / accessories: Digital display Sony in 3 axes, milling head can be swiveled down with manual quill, counter bearing, coolant ...

RÖHM 2-jaw chuck

• Manufacturer: Röhm

2-jaw chuck, two-jaw chuck, power chuck, wedge-hook chuck ROHM KFD-160/2 Individually adjustable jaws through teething ! Used!

ALLMATIC basic B 160

• Manufacturer: ALLMATIC

Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Jaw width: 160 mm | Weight of the machine approx.: 13,5 kg | Space requirements of the machine approx.: m | Spa...

HOFFMAN LK 630 - G 17

• Manufacturer: Hoffmann

Face Chuck - 3-Jaw chuck Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Diameter: 630 mm | Weight of the machine approx.: ca. 275 kg | Transport dimensi...

Roto Rekord 250x4

• Manufacturer: Roto Rekord

4-Jaw Chuck without Flange - width of the main body 79mm - with internal jaws - flange intake Ø 210 x 4 mm, mounting with 3x M12x30 mm screws, pitch circle Ø 230mm

1985 WMW 500

• Manufacturer: WMW
• Model: 500

face slide with 4 clamping chucks (clamping travel 60mm) clamping area internal: 145-500mm and external 140-420mm flange intake size= dia. 200mm with clamping bolts equipment: socket wrench

Röhm SSH 200/3 (Nr. 43)

• Manufacturer: Röhm

stationärer Spannstock SSH 200 Kraftspannfutter, hydraulisch Kraftspannung 53 kN Merkmale: Futterflansch Ø 280 x 17mm mit Spann-Nut 4x / 18x30mm Grundflansch Ø 290x30mm Flanschaufnahme Ø 140x10mm 20 Satz div. For...

Röhm Duro-NCES 260 77/3 (37)

• Manufacturer: Röhm

Merkmale: neuwertig automatisches spannen Spannbereich außen 120mm Spannbereich innen 50mm Flanschenaufnahme innen Ø170 x 6mm