Used Machine Tools in Saxony, Germany

MPK micro drill

• Manufacturer: Pagus

Micro drill, head drill, drill, 37 pieces MPK Type SX30E SX30E-2400105-0 Other quantities on request! New!

TCT micro drill

• Manufacturer: SUB-MICRON TECH CO. LTD.

Micro drill, head drill, drill, 9 pieces TCT, SUB-MICRON TECH CO. LTD. CBFB series 2.40*10.0 Other quantities on request! New!

TCT micro drill

• Manufacturer: SUB-MICRON TECH CO. LTD.

Micro drill, head drill, drill, 10 pieces TCT, SUB-MICRON TECH CO. LTD. UCCP series 0.20*3.5 Other quantities on request! New!

TCT micro drill

• Manufacturer: SUB-MICRON TECH CO. LTD.

Micro drill, head drill, drill, 10 pieces TCT, SUB-MICRON TECH CO. LTD. MD series 0.105*1.5 Other quantities on request! New!

WMW clamping technology set

• Manufacturer: WMW

Clamping tool set, tool holder, reducing sleeve , center point WMW 2 x fixed center point SK 45 1 x mandrel SK 50, Ø 40 mm, 80 mm long 1 x mandrel SK 50, Ø 50 mm, 235 mm long Used!

BO319

Column drilling machine; Column drilling machine WMW BS25 MK3 Motor: Elektromotorenwerke Thurm KR100,2/4-2 380V 3AC 50 Hz 3.7/4.95 A 1.420/2.830 rpm. tested, checked !

BO322

Column drill press ZMM METALLIK PAZARDJIK MK20 Vise: Motor: ELPROM A0100L8/4 0.7 / 1.1 kW 720 / 1430 rpm 380 V 3AC 2.5 / 3.2 A Used, tested!

PAGUS 3-axis positioner

• Manufacturer: Pagus

3-axis positioner with tool feed PAGUS 150/160mm Manual adjustment using crank wheels! Adjustment by pneumatic cylinder! used, tested!

Vertical pusher Marav VFS300

Vertical shaping machine Marav (Maschinenfabrik Ravensburg AG) VFS300 used, tested !

BARRY air spring

• Manufacturer: BARRY CONTROLS GmbH

Air spring, machine base BARRY CONTROLS GmbH SLM-48 Internal thread: M14 x 2.0, depth: 20 mm used, checked!

WMW service unit

• Manufacturer: WMW

Service device, machine control WMW SERVICE DEVICE III AUERBACH Fkr SRS 250/1 (AUERBACHFkrSRS250 /1) approx. 6 m connecting cable Similar to illustration! Used!

PAGUS mechanical clutch

• Manufacturer: Pagus

mechanical clutch PAGUS Hollow shaft 1: Diameter: Ø 24 mm 1 groove Hollow shaft 2: Diameter: Ø 21/25 mm 4 grooves Spare part and others. for milling machine FRITZ WERNER FV1! Used!

FIXATOR leveling range

• Manufacturer: Pagus

Bench leveling range for machine feet e FIXATOR 7 pieces Ø 100 mm x 1 mm, with slot 24 mm 8 pieces Ø 100 mm x 2 mm, with 24 mm slot 1 piece Ø 100 mm x 4 mm, with 24 mm slot 1 piece Ø 100 mm x 5 mm, with 24 mm slo...

AIRLOC leveling shoe

• Manufacturer: Pagus

Levelling shoe, machine foot, wedge foot, free-standing, 2 pieces AIRLOC 2-VRC New !

FARRAT leveling shoe

• Manufacturer: FARRAT MACHINERY Ltd.

Levelling shoe, machine foot, wedge foot, free-standing, 4 pieces FARRAT MACHINERY Ltd used, tested !