Used Machine Tools in Saxony, Germany

GARANT shrink chuck kit

• Manufacturer: Garant

Shrink fit kit, shrink chuck WARRANT 302,356 SK 40 Used!

GARANT shrink chuck kit

• Manufacturer: Garant

Shrink fit kit, shrink chuck WARRANT 302,235 SK 40 Used!

MMZ15

• Manufacturer: Pagus

Machine vice WMW SX200 used, tested !

EURO CIPEL Micro Drill

• Manufacturer: EURO CIPEL S.A.

Micro drills, head drills, drill bits, 35 pieces EURO CIPEL S.A. 0/D3500/L120 /HP01/T526/O /FA 906310/025/ Other quantities on request ! New !

PAGUS clamping device

• Manufacturer: Pagus

Clamping device, machine vice PAGUS Clamping jaw thread: M24 x 3.0, depth: 45 mm used, tested!

WMW AW 1100x1000x610

• Manufacturer: WMW

Drill cube material made of cast steel. Bohrwürfel Material aus Stahlguss. T-Nuten nach DIN 650m - Spannfläche vertikal: LxT: 1000 x 610mm - Spannfläche horizontal: LxB: 1000 x 1100mm

GARANT shrink chuck kit

• Manufacturer: Garant

Shrink fit kit, shrink chuck WARRANT 302,325 SK 40 Used!

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drills, drills, 26 pieces IND-SPHINX® PRECISION LIMITED D8352 D8352005500700000 Ã0.55x7.00mm Other quantities on request! New!

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drills, drills, 20 pieces IND-SPHINX® PRECISION LIMITED Type 546 54600011000700000 Ã1.10x7.00mm Other quantities on request! New!

WMW milling head

• Manufacturer: WMW

Milling head , Drilling head , Angle head WMW, WEMA Engelsdorf UA1 Rotatable 360° in two levels Hollow shaft (drive): Ø 28 mm, wedge width: 6 mm used, checked!

BOSCH tin snips

• Manufacturer: Bosch

Sheet metal shears, high-frequency sheet metal shears, high-frequency tools, high-frequency machines BOSCH EW/HEP 64A4Z1 0.1 / 0.12 KW 2075 / 2775 strokes/min 200 / 265 V 3AC 150 / 200 Hz approx. 3.5 m connection...

FORST guide bushing

• Manufacturer: Forst

Guide bushing FOREST CG4648.0082x212266 Flange diameter: Ã 180 mm, width: 31 mm Outer diameter 1: Ã 136 mm, length: 140 mm Outer diameter2: Ã 114 mm, length: 70 mm Slot width: 125.5 mm, groove depth: 14 mm New!

SBS balancing head

Balance head, balancing head, external, contactless SBS, Schmitt Dynamic Balance Systems SB850-N Top part: diameter: Ã 95 /62 mm x 80 mm Centering flange: diameter: Ã 95 mm, length: 6 mm Mounting flange: Diameter...

MMZ1337

Bearing block for tailstock PAGUS Bearing seat (left): Diameter: Ø 120 / 100 mm, Depth: 26 / 17 mm Bearing seat (right): Diameter: Ø 110 / 95 mm, Depth: 42 / 17 mm 4x Threaded holes: M8 x 1.25, Depth: 20 mm New!

PRECISE coordinate grinding head

Coordinate grinding head, grinding head, motor spindle, spindle motor PRECISE 0.875 H.P. (approx. 0.65 kW) 15000 - 54000 rpm 45 - 165 V AC 250 - 900 Hz used, tested!