Used Machine Tools in Thuringia, Germany

1986 ZEULENRODA PYE 160 S1M
- Manufacturer: Zeulenroda
- Model: PYE 160
- Stroke length: 200 mm
- Daylight: 500 mm
Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 160 t | Discharge: 360 mm | Hub: 500 mm | Speed off: 200 mm/sec | Speed up: 125 mm/sec | Distance table - ram: 1000 m...
Schmölln, Germany
2007 EBU HK 200 FR
- Manufacturer: EBU
- Model: HK 200 FR
– Hydraulic clutch – Fixed table – Hydraulic overload protection in the ram – Hydraulic connecting rod clamp – Motorized ram height adjustment 120 mm with digital display of the set ram height, rapid and creep sp...
Schmölln, Germany
1980 Schuler CR 80-345
- Manufacturer: Schuler
- Model: CR 80-345
- Stroke length: 480 mm
Additional Information: - the machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate control cabinet with touchscreen including cabling * N...
Schmölln, Germany
1984 MÜLLER CD 100.11.69
- Manufacturer: Muller
- Power requirement: 30 kW
- Machine was overhauled in 2008 - Work area enclosure with Sick light barrier - Installation height 580 mm - without large ram with ejector and pin clamping piece - Conversion of hydraulics to proportional valve...
Schmölln, Germany
1990 HELMERDING ERH 75 B
- Manufacturer: HELMERDING
Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear train in an oil bath - Fixed table prepared for hanging tool changing consoles - 2 roller strips in the table ...
Schmölln, Germany
ZEULENRODA PYE 10 S S
- Manufacturer: Zeulenroda
- Model: PYE 10
- Power requirement: 8.5 kW
- without clamping plate - only approved for work with closed tools
Schmölln, Germany
1986 KAISER V 40 W/680
- Manufacturer: Kaiser
- Model: V 40 W/680
- Power requirement: 8 kW
- Tappet with 2 connecting rods - Unidor tool monitoring - Kaiser right gripper feed, band width 180 mm, feed length 150 mm, max. 2nd mm - Kaiser scrap scissors on the left - soundproof cladding - Eccentric shaft...
Schmölln, Germany
1980 WEINGARTEN ARP 200
- Manufacturer: Weingarten
- Model: ARP 200
- Power requirement: 15 kW
The machine is checked in our warehouse and receives a current one Press test with protocol. The machine is safe for manual inlay work. - Operating instructions available On request, the machine can be used at an...
Schmölln, Germany
1989 KOHLER 150.2/150.1
- Manufacturer: Kohler
- Model: 15021501
- Power requirement: 2 kW
-Coil rewinding system with 3 single spools decoiler, type 150.2: - Spool width: 140 mm -Spreading: bolt spreading manually - Coil outer diameter: 800 mm -Brake: disc brake pneu. -Side shift: manually via spindle...
Schmölln, Germany
ZEULENRODA PED 63/2
- Manufacturer: Zeulenroda
- Power requirement: 6 kW
The following work is to be carried out on the machine / Partial overhaul: - Machine is dismantled, checked - Machine is repainted - New lubrication unit Vogel - New cam switch unit - New control cabinet with tou...
Schmölln, Germany
1993 SMERAL S 160
- Manufacturer: Šmeral Brno
- Model: S 160
- Power requirement: 15 kW
- Additional clamping plate - cross-grooved - foot switch - hydr. clutch - hydr. clamping ball spindle - hydr. overload - Flywheel brake - Hydraulics with oil cooler Machine can be partially overhauled by us for ...
Schmölln, Germany
1980 EDELHOFF HZP 100
- Manufacturer: EDELHOFF
- Power requirement: 11 kW
with shock absorption and die cushion Machine without control cabinet
Schmölln, Germany
1987 ZEULENRODA PEDV 63
- Manufacturer: Zeulenroda
- Power requirement: 6 kW
Machine is dismantled and partially overhauled -new color scheme -new control cabinet -conversion to safe operation -repair
Schmölln, Germany
AMBOLD JH25 – 200
- Manufacturer: ambold
- Power requirement: 22 kW
- pneumatic clutch - press safety valve, Herion - cam controller, Balluff - chain breakage monitoring - hydr. overload, HYDAC - motor. Ram adjustment with digital display - separate control cabinet with safety co...
Schmölln, Germany
1982 ZEULENRODA PED 63/3
- Manufacturer: Zeulenroda
- Power requirement: 6 kW
The following work is to be carried out on the machine / Partial overhaul: - Machine is completely dismantled, checked - Machine is repainted - New press safety valve - New separate control cabinet with touch pan...
Schmölln, Germany