Used framing table in Mexico

TABLE TABLE - 3' x 6'

• Manufacturer: amxmachinery.com

PART: 2CK-PH36-2 - Scissor Table - 3' x 6' It is strongly built with a massive steel frame that provides maximum durability and is capable of lifting up to 4400 lbs. It is hydraulically operated and controlled by...

ALFA MACCHINE FRAME ARMOR

• Manufacturer: Alfamacchine

PART # AMX-10014 - FRAME BUILDER - ALFA MACCHINE - MTRE-MITE - VN4 IN GOOD OPERATING CONDITION TABLE SIZE: 12" WIDE X 22" DEEP TABLE HEIGHT TO WORK ON: 37" FOR FRAME THICKNESSES: 0.197" MINIMUM TO 3.15" MAXIMUM F...

SHARP TABLE - 4' x 8'

PART: 2CK-PH48-2 - 4' x 8' Scissor Table It is strongly built with a massive steel frame that provides maximum durability and is capable of lifting up to 4400 lbs. It is hydraulically operated and controlled by a...

AM-U-300 - FRAME ERECTOR - SEMI-AUTOMATIC

• Manufacturer: amxmachinery.com

PART: 2AM-U-300 - FRAME ERECTOR - SEMI-AUTOMATIC NEW WITH WARRANTY The U-300 is a bench-top, frame joining machine and the most popular model of custom frame shops. It is compact, well constructed, and built for ...

FRAME CONNECTION DRILL - 1 DRILL HOLE

• Manufacturer: Union

PART # 2RT-R200T - UNION FRAME DRILL - 1 DRILL 1.5 HP Spindle Drive Motor, TEFC Manual Controls, 1-Phase, 110 V, 60 Hz Foot Actuated Boring Cycle 14 Degree Single Spindle 6,100 RPM Spindle Speed Ball Bearing Coll...

FRAME CONNECTION DRILL - 2 DRILLED HOLES

• Manufacturer: Union

PART # 2RT-R220T - FRAME JOINTING DRILL - 2 DRILLS 1.5 HP Spindle Drive Motor, TEFC 1" Spindle Centers Manual Controls, 110 V, TEFC Foot Actuated Boring Cycle Tooling included 14 Degree Double Spindle 1" Spindle ...

TRQ-763 OBI TYPE DIE CUTTING PRESS, 5 TON CAPACITY, WHITNEY JENSEN FRAME

• Manufacturer: Jensen

Whitney Jensen (U.S.A.) OBI type die cutting press, 5 Ton capacity, 6" x 12" table, 3" x 3" ram, 3/8" stroke, 6" S.H., mechanical clutch, 1/2 HP motor.

FRAME ASSEMBLER - ALFA MACCHINE - MTRE-MITE - VN4

• Manufacturer: Alfamacchine

PART # AMX-10014 - FRAME BUILDER - ALFA MACCHINE - MTRE-MITE - VN4 USED - GOOD CONDITION TABLE SIZE: 12" WIDE X 22" DEEP TABLE HEIGHT TO WORK ON: 37" FOR FRAME THICKNESS: 0.197" MIN. TO 3.15" MAX. FOR WIDE FRAMES...

TRQ-855 HYDRAULIC PRESS TYPE H MODEL HPV100, CAPACITY 110 TON, WANZKE FRAME

WANZKE (Germany) Hydraulic press type H model HPV100, capacity 110 Ton, table 21" x 27.5", ram 21" x 26", 6" stroke, max. opening 18", air cushion 10 ton, motor 18.5 Kw, s/n. EF97

TRQ-734 OBI DIE CUTTING PRESS TYPE OBI NO.4, CAPACITY 45 TON, STEEL FRAME

Steel (U.S.A.) OBI No.4 type die press, capacity 45 Ton, table 19" x 28", ram 7" x 12", 4" stroke, 9" S.H., 3" adjustment, mechanical clutch, motor 5 HP, s/n. 19392

TRQ-885 OBI DIE CUTTING PRESS TYPE OBI NO.65S, 65 TON CAPACITY, WALSH FRAME

WALSH (U.S.A.) OBI No.65S type die cutting press, 65 Ton capacity, 19" x 32.5" table, 12" x 14" ram, 5" stroke, 2" adjustment, 17" S.H., mechanical clutch, double ratio, 7.5HP engine, s/n. 8998

VERTICAL SLIDING TABLE SAW - STANDARD - CAP. 168" X 66" X 3-1/8" X 3-1/8

PART: 2ST-STANDARD - SAWING MACHINE VERTICAL SLIDING TABLE SAW - STANDARD - CAP. 169" X 66" X 3-1/8" X 3-1/8 NEW WITH WARRANTY - Swiss made quality for accuracy and durability! - Very stable, all welded steel fra...

ST-COMPACT-PLUS-TALL- 5207 - VERTICAL SLIDING TABLE SAW - COMPACT - CAP. 181" X 81" X 2-3/8"

• Manufacturer: Compacta

PART: 2ST-COMPACT-PLUS-TALL- 5207 - VERTICAL SLIDING TABLE SAW - COMPACT - CAP. 181" X 81" X 2-3/8" X 2-3/8" NEW WITH WARRANTY 5 HP motor - Swiss made quality for accuracy and durability! - Y-axis digital measuri...

VERTICAL SLIDING TABLE SAW - STANDARD-S - CAP. 168" X 66" X 3-1/8" X 3-1/8

PART: 2ST-STANDARD-S - SAWING MACHINE VERTICAL SLIDING TABLE SAW - STANDARD-S - CAP. 169" X 66" X 3-1/8" X 3-1/8 NEW WITH WARRANTY - Swiss made quality for accuracy and durability! - Very stable, all welded steel...

2014 KOMATSU 60 Ton Gap Frame Punch Press OBS – Low Hours – Great Conditions

• Manufacturer: Komatsu
• Model: OBS60

OVERVIEW The KOMATSU OBS60-34 is a 60 ton (600 kN) capacity open frame gap frame press, manufactured in Japan in March 2014. Designed for die-cutting, stamping and forming processes, this press combines power, pr...