Machine Tools » Okayama

Building Filters

78

Used computing in Okayama, Japan

  • 2008 Tsugami BS32C-V

    2008 Tsugami BS32C-V

    • Manufacturer: Tsugami
    • Model: BS32C

    FANUC18i-TB Split-bushing method Max. gripping bar diameter φ32 Max. machining length 250 Max. spindle drilling φ12, threading M10 Max. back spindle drilling φ10, threading M8 Main spindle 200-7000rpm Back spindl...

    Okayama, Japan
  • 1991 Dainichi Metal Industry M132x200

    1991 Dainichi Metal Industry M132x200

    • Manufacturer: Dainichi

    FANUC-15TF, bed swing φ1320 x center distance 2000, carriage swing φ900, 4-jaw indentation chuck φ1000, 4-corner tool rest, 3-row bed, bed width 1010, center distance support weight 10,000 kgs

    Okayama, Japan
  • 1995 Takizawa TC-4

    1995 Takizawa TC-4

    • Manufacturer: Takizawa

    FANUC18-T, center distance 1000, solid chuck φ450 (Kitagawa N-18), 10-sided turret Right-hand chip conveyor

    Okayama, Japan
  • 2019 Takizawa Ironworks TCC-1100 L2

    2019 Takizawa Ironworks TCC-1100 L2

    • Manufacturer: Takizawa Iron Works

    FANUC-0iTF, no chuck, XZ: 130*200, swing above bed φ380 Maximum machining diameter φ220, maximum machining length 171, spindle 4000 rpm, octagonal turret No tailstock 4 units in stock (3 units manufactured in 201...

    Okayama, Japan
  • 2018 Takamatsu XL-100

    2018 Takamatsu XL-100

    • Manufacturer: Takamatsu

    FANUC0i-TD Pull-down chuck φ150（SMW-AUTOBLOK TSF-C) XZ:120*280 Max. machining diameter φ180 Max. machining length 240 Spindle 6000rpm 8-square turret Right-feed chip conveyor ΣGH loader Workpiece stocker (12S)

    Okayama, Japan
  • 1992 Okuma LR45x1700 1SC

    1992 Okuma LR45x1700 1SC

    • Manufacturer: Okuma

    OSP-5020L Hollow chuck φ380 Swing φ700x1700mm X/Z: 380/1750mm 12 square turret Fixed swing stop Chip-con

    Okayama, Japan
  • 2023 Takisawa Ironworks TT-2100G

    2023 Takisawa Ironworks TT-2100G

    • Manufacturer: Takisawa
    • Model: TT2100G

    FANUC-0iTF Special collet chuck V10 + V10 square tool post Workpiece stocker with gantry loader with chip-con *New, unused machine

    Okayama, Japan
  • 2018 Takamatsu XL-100

    2018 Takamatsu XL-100

    • Manufacturer: Takamatsu

    FANUC0i-TD Pull-down chuck φ150（SMW-AUTOBLOK TSF-C) XZ:120*280 Max. machining diameter φ180 Max. machining length 240 Spindle 6000rpm 8-square turret Right-feed chip conveyor ΣGH loader Workpiece stocker (12S)

    Okayama, Japan
  • 2007 Mori Seiki NT3200/1000S

    2007 Mori Seiki NT3200/1000S

    • Manufacturer: Mori Seiki
    • Model: NT-3200

    MSX-701ⅢC (FANUC31iA) MAPPSⅢ XYZ: 685*±125*1075/B±120° Main spindle: Hollow chuck φ250 (Kitagawa B-210), 4200 rpm, φ75 through-hole Main spindle: Hollow chuck φ200 (Kitagawa BB208), 5000 rpm, φ66 through-hole Rot...

    Okayama, Japan
  • 2012 Noguchi Koki SM-2BU-600×3500-TS

    2012 Noguchi Koki SM-2BU-600×3500-TS

    • Manufacturer: Noguchi Koki

    GOT1000 (Mitsubishi) Swing φ600*3,500 between centers Indechuck φ350 (Kitagawa IC-14) Grinding wheel 2500rpm

    Okayama, Japan
  • 2000 Kawahara KS-1202

    2000 Kawahara KS-1202

    • Manufacturer: Kawahara

    FANUC POWER MATE D Machining capacity: Hole diameter ø5-25, hole depth 300-1150, spindle speed 6000 rpm, workpiece rotation 150 rpm Workpiece slide stop 2 places Tank capacity clean 800L dirty 300L

    Okayama, Japan
  • 1997 Okuma Toyokazu VTM-100

    1997 Okuma Toyokazu VTM-100

    • Manufacturer: Okuma
    • Model: VTM100

    FANUC-18T With milling Table φ910mm, Swing φ1000mm, Max. machining height H550mm 2APC BT50 ATC36 Table rotation Max600rpm (2-step low speed specification) Milling spindle Max4500rpm

    Okayama, Japan
  • 2016 Tsugami B0205₋III

    2016 Tsugami B0205₋III

    • Manufacturer: Tsugami
    • Model: B0205

    FANUC 0i-TD Gripping bar diameter φ3-φ20 Max. machining length 45mm (without guide bushing) Max. spindle drilling diameter φ10 Max. threading diameter M10x1.5 Max. back spindle drilling diameter φ8 Max. back spin...

    Okayama, Japan
  • 2001 Tsugami BO12B-Ⅲ

    2001 Tsugami BO12B-Ⅲ

    • Manufacturer: Tsugami
    • Model: BO12B

    TUGAMI-FANUC LG1 Max. gripping bar diameter φ12 Max. machining length 170 Max. spindle drilling φ7, threading M6×1 Max. back drilling φ4, threading M3×0.5 Max. cross drilling φ4, threading M3×0.5 Main spindle 120...

    Okayama, Japan
  • 2010 Amada G05

    2010 Amada G05

    • Manufacturer: Amada
    • Model: G05

    Comb blade type FANUC-21iTB Swing φ230 Spindle rotation 8000rpm Gantry Loader Workpiece stocker Dedicated for drilling and tapping ((2 units of drilling, 1 unit of tapping, indexing device / drilling and tapping ...

    Okayama, Japan
12345

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.