Machine Tools » Okayama

Building Filters

84

Used controllers in Okayama, Japan

  • 2008 Tsugami BS32C-V

    2008 Tsugami BS32C-V

    • Manufacturer: Tsugami
    • Model: BS32C

    FANUC18i-TB Split-bearing method Maximum handle bar material diameter φ32 Maximum processing length 250 Main spindle maximum hole drilling φ12, thread M10 Back-side maximum hole drilling φ10, thread M8 Main spind...

    Okayama, Japan
  • 1992 Okuma LR45x1700 1SC

    1992 Okuma LR45x1700 1SC

    • Manufacturer: Okuma

    OSP-5020L Hollow chuck φ380 Stroke φ700xcenter 1700mm X/Z: 380/1750mm 12-angle tool post Fixed vibration stop Chip cone

    Okayama, Japan
  • 2005 Takamatsu X-150

    2005 Takamatsu X-150

    • Manufacturer: Takamatsu

    FANUC0i-TB Hollow chuck φ150 (Stainless HF3-6A) XZ:175*330 Maximum machining diameter φ290, maximum machining length 300, spindle 3500rpm, through hole φ61 8-sided tool turret, no center press, back-out chip conv...

    Okayama, Japan
  • 2005 Mori Seiki CL1500

    2005 Mori Seiki CL1500

    • Manufacturer: Mori Seiki
    • Model: CL-1500
    • Spindle bore: 65 mm
    • Power requirement: 22 kW

    MSC-805 (Meldas) Hollow Chuck φ150 (Kitagawa B-206) XZ:245*370 Swing above bed φ510, Maximum machining diameter 430, Maximum machining length 370, Spindle 6000 rpm Through hole φ43, 12-sided turret, Chip conveyor

    Okayama, Japan
  • 1991 Dainichi Metal Industry M132x200

    1991 Dainichi Metal Industry M132x200

    • Manufacturer: Dainichi

    FANUC-15TF, bed swing φ1320 x center distance 2000, carriage swing φ900, 4-jaw indentation chuck φ1000, 4-corner tool rest, 3-row bed, bed width 1010, center distance support weight 10,000 kgs

    Okayama, Japan
  • 1995 Takizawa TC-4

    1995 Takizawa TC-4

    • Manufacturer: Takizawa

    FANUC18-T, center distance 1000, solid chuck φ450 (Kitagawa N-18), 10-sided turret Right-hand chip conveyor

    Okayama, Japan
  • 2019 Takizawa Ironworks TCC-1100 L2

    2019 Takizawa Ironworks TCC-1100 L2

    • Manufacturer: Takizawa Iron Works

    FANUC-0iTF, no chuck, XZ: 130*200, swing above bed φ380 Maximum machining diameter φ220, maximum machining length 171, spindle 4000 rpm, octagonal turret No tailstock 4 units in stock (3 units manufactured in 201...

    Okayama, Japan
  • 2018 Takamatsu XL-100

    2018 Takamatsu XL-100

    • Manufacturer: Takamatsu

    FANUC0i-TD Pull-down chuck φ150（SMW-AUTOBLOK TSF-C) XZ:120*280 Max. machining diameter φ180 Max. machining length 240 Spindle 6000rpm 8-square turret Right-feed chip conveyor ΣGH loader Workpiece stocker (12S)

    Okayama, Japan
  • 2005 Takamatsu X-150

    2005 Takamatsu X-150

    • Manufacturer: Takamatsu

    FANUC0i-TB Hollow chuck φ150 (Stainless HF3-6A) XZ:175*330 Maximum machining diameter φ290, maximum machining length 300, spindle 3500rpm, through hole φ61 8-sided tool turret, no center press, back-out chip conv...

    Okayama, Japan
  • 2005 Mori Seiki CL1500

    2005 Mori Seiki CL1500

    • Manufacturer: Mori Seiki
    • Model: CL-1500
    • Spindle bore: 65 mm
    • Power requirement: 22 kW

    MSC-805 (Meldas) Hollow Chuck φ150 (Kitagawa B-206) XZ:245*370 Swing above bed φ510, Maximum machining diameter 430, Maximum machining length 370, Spindle 6000 rpm Through hole φ43, 12-sided turret, Chip conveyor

    Okayama, Japan
  • 2018 Takamatsu XL-100

    2018 Takamatsu XL-100

    • Manufacturer: Takamatsu

    FANUC0i-TD Pull-down chuck φ150（SMW-AUTOBLOK TSF-C) XZ:120*280 Max. machining diameter φ180 Max. machining length 240 Spindle 6000rpm 8-square turret Right-feed chip conveyor ΣGH loader Workpiece stocker (12S)

    Okayama, Japan
  • 2007 Mori Seiki NT3200/1000S

    2007 Mori Seiki NT3200/1000S

    • Manufacturer: Mori Seiki
    • Model: NT-3200

    MSX-701ⅢC (FANUC31iA) MAPPSⅢ XYZ: 685*±125*1075/B±120° Main spindle: Hollow chuck φ250 (Kitagawa B-210), 4200 rpm, φ75 through-hole Main spindle: Hollow chuck φ200 (Kitagawa BB208), 5000 rpm, φ66 through-hole Rot...

    Okayama, Japan
  • 2023 Takisawa Ironworks TT-2100G

    2023 Takisawa Ironworks TT-2100G

    • Manufacturer: Takisawa
    • Model: TT2100G

    FANUC-0iTF Special collet chuck V10 + V10 square tool post Workpiece stocker with gantry loader with chip-con *New, unused machine

    Okayama, Japan
  • 2012 Noguchi Koki SM-2BU-600×3500-TS

    2012 Noguchi Koki SM-2BU-600×3500-TS

    • Manufacturer: Noguchi Koki

    GOT1000 (Mitsubishi) Swing φ600*3,500 between centers Indechuck φ350 (Kitagawa IC-14) Grinding wheel 2500rpm

    Okayama, Japan
  • 2001 Tsugami BO12B-Ⅲ

    2001 Tsugami BO12B-Ⅲ

    • Manufacturer: Tsugami
    • Model: BO12B

    TUGAMI-FANUC LG1 Max. gripping bar diameter φ12 Max. machining length 170 Max. spindle drilling φ7, threading M6×1 Max. back drilling φ4, threading M3×0.5 Max. cross drilling φ4, threading M3×0.5 Main spindle 120...

    Okayama, Japan
12345

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.