Used Machine Tools in Quebec, Canada

DMG MORI DMU 85 FD MONOBLOCK 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH DMG

• Manufacturer: DMG Mori
• Model: DMU 85 FD MONOBLOCK

DMG MORI (2012) DMU 85 FD MONOBLOCK 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH DMG ERGOLINE CNC CONTROL, 33” DIA. ROTARY TABLE, TRAVELS: X – 33.4”; Y – 33.4”; Z – 25.6”; A - 120 DEG./+120 DEG.; C – 360 ...

DMG MORI DMU 65 MONOBLOCK 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH DMG ERGOLINE

• Manufacturer: DMG Mori
• Model: DMU 65 MONOBLOCK

DMG MORI (2012) DMU 65 MONOBLOCK 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH DMG ERGOLINE CNC CONTROL, 25” DIA. INTEGRATED ROTARY TABLE, TRAVELS: X – 28.9”; Y – 25.6”; Z – 22”; A - 120 DEG./+120 DEG.; C ...

MAZAK MAZATECH V-414 CNC VERTICAL MACHINING CENTER WITH MAZATROL M32B CNC CONTROL, 35”X16” TABLE

• Manufacturer: Mazak
• Model: MAZATECH V-414

MAZAK MAZATECH V-414 CNC VERTICAL MACHINING CENTER WITH MAZATROL M32B CNC CONTROL, 35”X16” TABLE, TRAVELS: X – 22”; Y – 16”; Z – 18”, SPINDLE SPEEDS TO 7,000 RPM, CAT 40 TAPER, 24 STATION ATC, COOLANT, S/N: 10218...

1999 AMADA VIPROS 255 CNC PUNCHING MACHINE

• Manufacturer: Amada
• Model: Vipros-255

Bill: AMADA | Tonnage: 22T | Max. sheet size: 50" X 100" (WITH REPOSITIONING) | Max. positioning speed: 2559"/MIN | Max. strokes per minute: 340 TO 1" CENTERS | Max. punching capacity: 1/4" | Tool stations in th...

CINCINNATI V5-3000 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH FAGOR WINDOWS-BASED CNC

• Manufacturer: Cincinnati
• Model: V5-3000

CINCINNATI V5-3000 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH FAGOR WINDOWS-BASED CNC CONTROL, 130”X30” TABLE, TRAVELS: X – 119.2”; Y – 29.8”; Z – 30”; A - +40 DEG./-40 DEG.; B - +40 DEG./-40 DEG., SPIN...

Airscrew 25hp.

Capacity: 120 GALLONS | Engine: 25 HP. | Voltage: 575V/3PH

FIDIA K197/5 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH FIDIA C20 CNC CONTROL, 78”

• Manufacturer: Fidia

FIDIA (2003) K197/5 5-AXIS HIGH SPEED CNC VERTICAL MACHINING CENTER WITH FIDIA C20 CNC CONTROL, 78”X49” TABLE, TRAVELS: X – 64.9”; Y – 29.5”; Z – 27.5”; A - +90 DEG./-90 DEG.; B - +180 DEG./-180 DEG., SPINDLE SPE...

Pangborn vibratory tub tumbler 6 cubic feet deburr machine

• Manufacturer: Pangborn

"Normal wear from use. Tested, powerful machine!" Vibratory tub parts finisher, 'Pangborn' 6′ cu. ft. (USA) grit size of media. This unit can take almost any type and size of abrasive media on the regular market....

Havlik Hydraulic Milling Head 20HP MT50

• Manufacturer: Denison

(“Made in Canada to USA Standards”. It’s Guaranteed) “New! Never used, never installed, kept in dry storage!” NEW! Havlik Hydraulic Milling Heads (4 available! Buy all of them and get a 20 % discount) Milling hea...

KURAKI KV-500H VERTICAL CNC MACHINING CENTER

• Manufacturer: Kuraki

Voltage: 600V / 3PH

24inch rotary table, from Cincinnatti rotary milling machnes, X & Y, precision.

• Manufacturer: Cincinnati

"This is the entire top 24″ rotary table in good condition of a Cincinnatti, #3 (approx) "rotary milling machine" as in the photo attached. Unfortunately the small shop needed more room "downsized" the milling to...

1998 KIHEUNG KMB-U6 BENCH MILLING MACHINE (21.5″ X 86.5″)

• Manufacturer: Kiheung

AXLE TRAVEL: X: 63", Y: 28", Z: 27.5" SPINDLE SPEED: LOW: 40-220, HIGH: 300-1600 RPM

Horizontal, universal Milling w/ TOS 360° vertical head, 11 x 43″ table

• Manufacturer: HMT

"This absolutely complete, universal horizontal mill includes a fully functioning 360° TOS rotating vertical head. There is very little wear. It sat for a year or two in a retiring dealers heated warehouse. We te...

Schaublin model 13 Precision Toolroom Milling The world’s top brand!

• Manufacturer: Schaublin

"Normal wear from use, always well maintained!" Milling, Schaublin model, 13 Precision, universal, tool roomAlways well maintained and ready to work! The world's top machine-tool brand! Sold warranted against all...