Used engine stand in Queensland, Australia

METAL LATHE DIGITAL 240V 900MM CENTRE AF

• Spindle bore: 38 mm

LATHE DIGITAL 900MM CENTRE AF LEAD SCREW QUICK CHANGE TOOLPOST WITH 4 HOLDERS. 2 AXIS DIGITAL READOUT.240 VOLT WITH STA LONGITUDINAL FEED RANGE (Z-AXIS): 0.04 - 1.2236MM/REV METRIC THREAD STEPS & PITCH RANGE: 32 ...

METAL BANDSAW HORIZONTAL 240V 215MM

METAL BANDSAW LARGE HORIZONTAL 240VOLT 1.5HP-MAX CUT ROUND 215MM BOX 190MM RECT 140MM X 240MM ON STAND SWIVEL HEAD 195KG METAL BANDSAW HORIZONTAL - 240 VOLT 1.5HP MOTOR BLADE SIZE - 2460MM LONG X 27MM WIDE X 0.9M...

BEAD ROLLER 240V VARI SPEED 1.2MM STEEL

• Manufacturer: Metalmaster

BEAD ROLLER 240 VOLT VARI SPEED 1.2MM MILD STEEL WITH 1070MM THROAT DEPTH WITH 12 SETS OF HARDENED ROLLS FOOT OPPERATED OVERVIEW: THE MBR-1070 MOTORISED BEAD ROLLER IS MUCH EASIER TO USE COMPARED TO MANUAL MACHIN...

AIR IMPACT 1" DRIVE D HANDLE 2100FT

• Manufacturer: Ingersoll Rand

AIR IMPACT 1" DRIVE D HANDLE 2100FT OF TORQUE WITH INNER TRIGGER ON 360" ADJ D HANDLE WEIGHT 9.75KG @ 770 BPM IR THE 2850MAX 1" D-HANDLE IMPACT WRENCH - OUR FIERCEST 1" WRENCH, ENGINEERED TO MAKE QUICK WORK OF ...

Safety Speed H Series Vertical Wall Saw

• Manufacturer: Safety Speed

Includes: Wheel Kit, Stand And Saw Blade Vertical Saws provide the safest and fastest solution for processing panels. Save your back, and cut vertically or horizontally, with a vertical panel saw featuring a heav...

METAL LATHE 300 X 900MM & CAB STAND FOOT

• Spindle bore: 38 mm

METAL LATHE 300 X 900MM & CAB STAND FOOT 18 SPINDLE SPEEDS FROM 65 TO 1810RPM. POWERED LONGITUDINAL AND CROSS FEEDS. LONGITUDINAL FEED RANGE (Z-AXIS): 0.07 - 1.29MM/REV METRIC THREAD STEPS & PITCH RANGE: 32 (0.4 ...

METAL BENCH LATHE 250MM X 500MM BED 240V

• Spindle bore: 26 mm

METAL BENCH LATHE 250MM SWINGX 500MM BED 12SPEEDS-26MM BORE IN HEAD-QUICK ACTION GEARBOX 1HP 240 VOLT MOTOR- NO STAND METAL BENCH LATHE 250MM X 500MM BED 240 VOLT - STAND IS NOT INCLUDED STAND TO SUIT P/N ( L150 ...

LATHE METAL GEARED HEAD1HP 600MM CENTRE

• Spindle bore: 38 mm

LATHE METAL GEARED HEAD1HP 600MM CENTRE METRIC/IMPERIAL THREAD CUT 38MM BORE POWERED LONGITUDINAL AND CROSSFEED. FEATURES: - GEARED HEADSTOCK FOR QUICK CHANGE OF SPINDLE SPEEDS - PRECISION 'V'-BEDS ARE HARDENED A...

HYDRAULIC 50 TON FLOOR PRESS HEAVY DUTY

WORKSHOP PRESS HEAVY DUTY 50 TONNE RAM 2 STAGE HYDRAULICHAND PUMP SPRING RETURN RAM-RISE & FALL WINCH TABLE & RAM GAUGE APPLICATION: FOR THE FAST EFFICIENT REMOVAL AND INSTALLATION OF BEARINGS, GEARS, BUSHINGS, P...

LATHE METAL 500MM BENCH MODEL GEAR HEAD

METAL LATHE 500MM BED, 220MM SWING, 20MM SPINDLE BORE, 6 SPEED 100-1800 RPM 3/4HP MOTOR. LATHE STAND L263 500MM MAX. LENGTH OF WORKPIECE 140MM SWING OVER TOOL CARRIER NO. 4 TAPER OF HOLE IN SPINDLE MORSE 160MM ...

K STEEL ROLLER 1.5MM 1270 X 75MM S272

CAST-IRON CONSTRUCTION QUICK ADJUSTMENT STEEL HAND ROLLER 1.5MM CAP 1270 X 75MM RILLER MILD STEEL 1.2MM MIN DIA 115MM OVERVIEW: THIS NEW SRG-50G NOW FEATURES A "GEARBOX REDUCTION DRIVE SYSTEM" THAT REQUIRES MUCH ...