Machine Tools » Saitama

Building Filters

50

Used processing in Saitama, Japan

  • 2008 Morioka General-purpose vendor [LD-412].

    2008 Morioka General-purpose vendor [LD-412].

    • Manufacturer: Morioka (city)

    Product name: Other sheet metal vendors | Main specifications: Universal bending machine, processing plate thickness t2.5x1220mm, mouth opening 38mm, SN:007050378

    Tokigawa, Japan
  • 1999 ISEL BS-BH3000 (4 rolls)

    1999 ISEL BS-BH3000 (4 rolls)

    • Manufacturer: IJssel

    Product name: Roll Bender | Main specifications: Machine weight: 19.8t (including steel plate) Roll shaft effective width: 3000 Upper roll shaft diameter: φ400 Lower roll shaft diameter: φ240 Side roll shaft dia...

    Tokigawa, Japan
  • 1997 Extrude Hone EX-800 (abrasive

    1997 Extrude Hone EX-800 (abrasive flow processing machine)

    • Manufacturer: Extrude-Hone

    Product name: Other general machine tools | Main specifications: Clamp stroke: minimum 34.5 mm, maximum 284.5 mm; Clamp cylinder spacing: 500 mm; Flange outer diameter: Φ180 mm; Clamp output: 11 tons; Media cyli...

    Tokigawa, Japan
  • 2014 Amada Miyachi ML-7320CL

    2014 Amada Miyachi ML-7320CL

    • Manufacturer: Amada

    Product name: Laser processing machine | Main specifications: 3D head marking area 120mm Protection glass φ40×1t Single phase 100V Software: LMDraw6-3D Air cooled Fiber length 2m Oscillator output 20W

    Tokigawa, Japan
  • 2004 Kyoritsu Seiki

    2004 Kyoritsu Seiki

    • Manufacturer: Seiki

    Tool presetter Product name: Other Sheet Metal Machinery | Main specifications: Tool presetter for BT30,BT40

    Tokigawa, Japan
  • Miyachi Technos ML-4141B

    Miyachi Technos ML-4141B

    • Manufacturer: Technos

    ML-4141B Product name: Fusing machine accessories | Main specifications: ML-4141B

    Tokigawa, Japan
  • 1991 Alps AX-3

    1991 Alps AX-3

    • Manufacturer: Alps

    3 m Product name: Other Sheet Metal Machinery | Main specifications: 3m

    Tokigawa, Japan
  • 2007 Koyo KVD450C (vertical double-head

    2007 Koyo KVD450C (vertical double-head surface grinder)

    • Manufacturer: Koyo

    Product name: Surface grinding machine | Main specifications: Maximum processing diameter 100m, Maximum processing width 50mm, Grinding wheel φ455 x 50 x (φ205), Grinding wheel rotation speed 1050rpm

    Tokigawa, Japan
  • 1993 Amada CSW-250

    1993 Amada CSW-250

    • Manufacturer: Amada
    • Model: CSW-250

    Product name: Shearing | Main specifications: OH240010 Max. processing dimensions: Corner notch 250 x 250 mm, Edge notch max. 100 x 150 (standard 50 x 150) Max. processing thickness 3.2 mm | Machine dimensions (...

    Tokigawa, Japan
  • 2001 NBV-3-6-MNCAL

    2001 NBV-3-6-MNCAL

    • Manufacturer: Funokoshi

    Product name: Broaching machine | Main specifications: No.B-1619 Pulling force 30KN, Max. process 600mm, Bolster hole diameter φ100mm

    Tokigawa, Japan
  • 2005 Roland DG / Roland

    2005 Roland DG / Roland DG Corporation MDX-40

    • Manufacturer: Roland
    • Model: MDX

    Specifications To inquire about this machine, please fill in the following information and click the [Send] button. Items marked with an asterisk (*) are required fields, so please be sure to fill them out comple...

    Kawaguchi, Japan
  • 2004 Amada SDH110

    2004 Amada SDH110

    • Manufacturer: Amada

    Product name: Hydraulic press (100T～) | Main specifications: Processing capacity 110tf Stroke length 300mm Bottom dimension of slide 1000x900 Bolster dimension 1100x1050 Bolster thickness 110mm with die cushion

    Tokigawa, Japan
  • 2003 NBV-7.5-12AAL NBV-7.5-12AAL

    2003 NBV-7.5-12AAL NBV-7.5-12AAL

    • Manufacturer: Funokoshi

    Product name: Broaching machine | Main specifications: Pulling force 75KN Max. process 1200mm Cutting speed 50Hz 2~6,5m/min Feed speed 50Hz MAX12m/min Ram width 240mm

    Tokigawa, Japan
  • 2011 SANKI SEIKO SDP-1612-200

    2011 SANKI SEIKO SDP-1612-200

    • Manufacturer: Three fertilizer

    Product name: Hydraulic press (100T～) | Main specifications: Processing capacity 400-2000 kN, pulling capacity 570 kN, table area 1600 x 1200 mm, stroke 1170 mm, maximum die weight 8 TON, maximum upper die weigh...

    Tokigawa, Japan
  • 2003 OKK HP400 (horizontal machining

    2003 OKK HP400 (horizontal machining center)

    • Manufacturer: OKK

    Product name: Horizontal machining center | Main specifications: NC device: F-21iMB Table: □400 Maximum loading mass: 400 kg Pallet indexing angle: 0.001° Spindle speed: 12000 S(XYZ): 630×620×710 BT40 ATC40 Thro...

    Tokigawa, Japan
1234

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.