Machine Tools » St. Gallen

Building Filters

140

Used metal processing in St. Gallen, Switzerland

  • Trusted Seller
    2001 LASCO TZP 1000 SO

    2001 LASCO TZP 1000 SO Ref No: 46228

    • Manufacturer: Lasco

    Complete hot forming line (sheet metal applications) consisting of: * 1000 to. hydraulic press LASCO * Schwartz furnace system: - max. lining width: 1700 mm - Furnace length: 27060 mm * Strothmann feeder * ABB lo...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 LOIRE SAFE EDIMR 800

    2003 LOIRE SAFE EDIMR 800 Ref No: 46229

    • Manufacturer: Loire Safe

    Complete hot forming line (sheet metal application)consisting of: * Hydraulic press LOIRE SAFE 800 to. * Schwartz GA1534 furnace system: - max. lining width: 1.500 mm - Inner furnace length: 20.000 mm - Inner hei...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2015 HS AUTOMATION MS41OL Ref

    2015 HS AUTOMATION MS41OL Ref No: 45513

    • Manufacturer: HS AUTOMATION

    - Hydraulic spreading process - Reel drive three-phase motor - Tape loop control Pull-off via preset pressure or via loop control - Coil stop arms 6 pieces with quick clamping system - Protective device against t...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2005 ARKU RM 50X/9 ECOPLAN

    2005 ARKU RM 50X/9 ECOPLAN Ref No: 46236

    • Manufacturer: Arku

    Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-t...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2010 PLASMATOME 20 MPC Ref

    2010 PLASMATOME 20 MPC Ref No: 51131

    • Manufacturer: PLASMATOME

    The plasma is in operation, if anyone wants to see it there would be no problem to make an appointment. Expected dismantling date, second half of July 2025

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    GAMEI 300 T Ref No:

    GAMEI 300 T Ref No: 43738

    • Manufacturer: GAMEI

    Object: 43738 | Last overhaul: 2000 | Total force (nominal): 300 to | Table surface (left-right): 475 mm | Table surface (front-back): 410 mm | Height above floor level: 640 mm | Shut height (stroke down, ad...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1980 HILU SSP 140W Ref

    1980 HILU SSP 140W Ref No: 49232

    • Manufacturer: HILU

    The machine is being sold by us on behalf of a customer. Unfortunately, a video is not available. The machine has been with the seller for over 15 years and has not been in operation since then. An inspection un...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1990 HYDRAP HKP 12 Ref

    1990 HYDRAP HKP 12 Ref No: 45747

    • Manufacturer: HYDRAP

    Hour counter: 30'181 h last safety check: 27.07.2023, overrun time 38 ms, overrun distance 60 mm

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1990 LAUFFER EPT 100 Ref

    1990 LAUFFER EPT 100 Ref No: 49540

    • Manufacturer: LAUFFER

    Equipment: - Cutting impact dampening - Hydraulic die cushion and ejector - CNC - gripper feed (200x900x1700) - Soprem belt system (optional) see article no. 3-49541

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 SCHULER GRÄBENER GMO 2-315-2000-160

    2003 SCHULER GRÄBENER GMO 2-315-2000-160 Ref No: 44872

    • Manufacturer: Schuler

    Knucke Joint press for slow movement when approaching BDC Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1999 LOIRE SAFE EDIM 350-150/16-14/14-12

    1999 LOIRE SAFE EDIM 350-150/16-14/14-12 Ref No: 41754

    • Manufacturer: Loire Safe

    Object: 41754 | Controls: SIEMENS S5 95U | Drive system: hydraulic | Openings in uprights: yes | Total force (nominal): 350 to | Table surface (left-right): 1600 mm | Table surface (front-back): 1400 mm | Str...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1983 SMT MV20 BL5022 Ref

    1983 SMT MV20 BL5022 Ref No: 42997

    • Manufacturer: SMT

    Maximum wall thicknesses: Material up to approx. 450 N/mm² max. 22mm (steel) Material up to approx. 750 N/mm² max. 17.5mm (stainless steel) Maximum diameter : dished end approx. 5000 mm Basket arch bottom approx....

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2011 FEINTOOL XFT 2500 Ref

    2011 FEINTOOL XFT 2500 Ref No: 49649

    • Manufacturer: FEINTOOL

    Peripheral equipment of the line: - Decoiler ARKU AH 5000/500/MSG-40 - Straightener ARKU Coil Master 5050/9 Condition: - 51,600 operating hours - 98 million strokes According to the latest OEM service inspectio...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2004 FEINTOOL HFA 4500 PLUS

    2004 FEINTOOL HFA 4500 PLUS Ref No: 49656

    • Manufacturer: FEINTOOL

    including Coil Line ARKU AH 3000/300 MSG Object: 49656 | Drive system: hydraulic | Quick die change system: yes | Total force (nominal): 450 to | Stroke: 230 mm | Working velocity min.: 5 mm/s | Working veloci...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1976 FEINTOOL HFA 6300 Ref

    1976 FEINTOOL HFA 6300 Ref No: 32866

    • Manufacturer: FEINTOOL

    + press rebuilt in 2011 with new hydraulics and new electrics + roller feeders with manual height adjustment + press frame reinforced with 4 tie rods complete line currently dismantled and lying on stocks

    Niederhelfenschwil, Switzerland
12345

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.