Machine Tools » Switzerland

Building Filters

66

Used a frames in Switzerland

  • Trusted Seller
    1967 WEINGARTEN ARS 100 Ref

    1967 WEINGARTEN ARS 100 Ref No: 47690

    • Manufacturer: Weingarten
    • Model: ARS 100

    for safe tools only Object: 47690 | Drive system: eccentric / crank | Frame design: C-frame, single sided | Total force (nominal): 100 to | Slide force: 100 to | Stroke rate (max.): 72 /min | Slide adjustment:...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1997 ROSS 63R4 Ref No:

    1997 ROSS 63R4 Ref No: 55175

    • Manufacturer: Ross

    Object: 55175 | Controls: DANFOS | Drive system: eccentric / crank | Frame design: C-frame, single sided, inclinable | Openings in uprights: yes | Number of slide actions: 1 | Table cushion: no | Opening in tabl...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2002 MIOS T20 FV Ref

    2002 MIOS T20 FV Ref No: 53991

    • Manufacturer: Mios

    Object: 53991 | Spigot hole diameter: 30 mm | Stroke rate (max.): 155 /min | Stroke min.: 5 mm | Stroke max.: 60 mm | Shut height (stroke down, adjustment up), bdc: 280 mm | Throat (c-frame): 180 mm | Tota...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1990 HYDRAP HKP 12 Ref

    1990 HYDRAP HKP 12 Ref No: 45747

    • Manufacturer: HYDRAP

    Hour counter: 30'181 h last safety check: 27.07.2023, overrun time 38 ms, overrun distance 60 mm

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2002 ESNA VFS/PN45 Ref No:

    2002 ESNA VFS/PN45 Ref No: 55264

    • Manufacturer: ESNA

    Object: 55264 | Drive system: eccentric / crank | Total force (nominal): 45 to | Table surface (left-right): 410 mm | Table surface (front-back): 280 mm | Opening in bed (diameter): 40 mm | Stroke rate (max....

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2001 MIOS T20 FV Ref

    2001 MIOS T20 FV Ref No: 55890

    • Manufacturer: Mios

    Object: 55890 | Drive system: eccentric / crank | Openings in uprights: yes | Number of slide actions: 1 | Table cushion: no | Quick die change system: no | Total force (nominal): 20 to | Spigot hole diameter: ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1972 FEINTOOL GKP F 100/160

    1972 FEINTOOL GKP F 100/160 Ref No: 49648

    • Manufacturer: FEINTOOL

    Object: 49648 | Drive system: knuckle-joint | Frame design: H-frame, monoblock | Total force (nominal): 160 to | Stroke: 13 mm | Stroke rate (max.): 72 /min | Nominal force: 50 to | Lower table (left-right):...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2010 PLASMATOME 20 MPC Ref

    2010 PLASMATOME 20 MPC Ref No: 51131

    • Manufacturer: PLASMATOME

    The plasma is in operation, if anyone wants to see it there would be no problem to make an appointment. Expected dismantling date, second half of July 2025

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2005 SANGIACOMO T 130R CE

    2005 SANGIACOMO T 130R CE Ref No: 55882

    • Manufacturer: San Giacomo
    • Model: T130R
    • Stroke length: 200 mm
    • Shut height: 360 mm

    Object: 55882 | Drive system: eccentric / crank | Table cushion: no | Total force (nominal): 130 to | Nominal work capacity: 1300 kNm | Table surface (left-right): 740 mm | Table surface (front-back): 540 mm...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1995 LOIRE SAFE EDIM 650-250

    1995 LOIRE SAFE EDIM 650-250 Ref No: 41753

    • Manufacturer: Loire Safe

    Object: 41753 | Controls: SIEMENS S5 95U | Drive system: hydraulic | Frame design: H-frame, monoblock | Openings in uprights: yes | Number of suspensions: 2 | Table cushion: yes | Total force (nominal): 650 to ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1970 FEINTOOL GKP F 100/160

    1970 FEINTOOL GKP F 100/160 Ref No: 38727

    • Manufacturer: FEINTOOL

    The press can currently not be inspected in operation Reconstruction of the complete mechanical system and the hydraulic system. New electrical panel. Servomotor in the feeder. All in 2017.

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1996 PLATARG 2513 Ref No:

    1996 PLATARG 2513 Ref No: 46301

    • Manufacturer: PLATARG

    Can be tested in operation Max. Flywheel speed: 760 1/min. Capacity on one stage approx. 25T Clutch engagement max. 10/min Air pressure 5.5 bar (min) - 5.8 bar (max) Total deceleration time Braking <250 ms Zig...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1989 ARISA SC2-160-150-S Ref No:

    1989 ARISA SC2-160-150-S Ref No: 43998

    • Manufacturer: ARISA

    Servo feeder and Siemens control with touch screen, simodrive and simoreg. All documentation, including retrofitting

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 SCHULER GRÄBENER GMO 2-315-2000-160

    2003 SCHULER GRÄBENER GMO 2-315-2000-160 Ref No: 44872

    • Manufacturer: SCHULER GRÄBENER

    Knucke Joint press for slow movement when approaching BDC Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    1983 FEINTOOL HFA 6300 Ref

    1983 FEINTOOL HFA 6300 Ref No: 42998

    • Manufacturer: FEINTOOL

    provided with 2 Hydraulic Pumps Press is not connected

    Niederhelfenschwil, Switzerland
12345

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.