Used Machine Tools in Texas, USA

Continental Emsco 100 TON Block With 8 Sheaves

• Manufacturer: Continental emsco

General Specifications: Sheave Diameter: Typically ranges between 36 inches (914 mm) and 44 inches (1118 mm) for blocks of similar capacity​ Wire Rope Compatibility: Commonly accommodates wire ropes with diameter...

Omron AC VFD House 3×4

• Manufacturer: Omron

Used in very good condition 3x4 Omron AC VFD House, set up for three 3512, TDS11 Top Drive, 2 Pumps 7500 PSI, Drawworks. The house has the 4th cabinet for adding another Genset and 3rd cabinet to add another mud ...

National 80-B Drawworks

• Manufacturer: National

National 80‑B Drawworks Specifications Power Rating: • Approximately 1000 HP mechanical drive Design & Configuration: • Single-drum mechanical design • Often part of a rig setup featuring a 10‑line system Braking...

New Surplus LeTourneau LDW550K Drawworks

• Manufacturer: Letourneau

Key Specifications & Features Line Pull Capacity: • Designed to deliver a high line pull – typically around 550,000 lbs (550K) – to handle long drill strings and heavy cable loads in deep‐well and directional dri...

QT-2 Elmagco 15050W Drawworks Brakes

QT‑2 Elmagco 15050W Drawworks Brakes – Representative Specifications General Description • The QT‑2 15050W is a friction‐type brake assembly designed specifically for drawworks systems. It’s built to deliver cons...

Eckel Iron Roughneck

• Manufacturer: Eckel

Eckel Iron Roughneck Eckel specializes in the design and manufacture of hydraulic power tongs, which are essential tools in oil and gas drilling operations for making up and breaking out tubular connections. Whil...

AC 1500 Crown Drawworks

• Manufacturer: Crown

Surplus New AC 1500 Crown Drawworks Power & Engine: • Rated around 1500 HP – providing robust power for deep-well and directional drilling operations. Pullback & Line Pull: • Typically engineered to achieve pullb...

Rebuilt National 1625 Drawworks

• Manufacturer: National Oilwell Varco, Inc

National 1625 Drawworks – Specification Overview Engine & Power System • Drive System: Integrated mechanical/hydraulic drive designed for efficient power transmission and durability under high-cycle duty Torque &...

National 80-UE Drawworks

• Manufacturer: National Oilwell Varco, Inc

National 80‑UE Drawworks – Typical Specifications Engine & Power System • Rated Power: Typically around 800–900 HP (engine selection and configuration may vary) • Drive System: Combines a mechanical drive with hy...

NOV Iron Roughneck AR4500

• Manufacturer: NOV

Used in working condition NOV Iron Roughneck AR4500, this unit can be sold out as is, or rented out for more info please contact us at This email address is being protected from spambots. You need JavaScript enab...

JC50 Drawworks

Rated power: 1,100 kW (1,500 HP)​ | Maximum fast line pull: 340 kN (76,400 lbs)​ | Drilling line diameter: 35 mm (1 3/8 inches)​ | Drum size (diameter x width): 685 mm x 1,138 mm (27 x 44 7/8 inches)​ | Main bra...

NOV DSGD-CX425 2000 HP Drawworks

NOV DSGD-CX425 Specifications Hoisting Capacity with 8 Lines: Hoisting Capacity with 10 Lines: Hoisting Capacity with 16 Lines:

Canrig Top Drive 275 Ton

Hoisting capacity: 275 tons (249 tonnes) | Output power (continuous): 600 HP (450 kW) | Maximum speed: 225 RPM | Continuous drill torque: 30,000 ft-lb (4,067 daN-m) | Maximum torque: 60,000 ft-lb (8,130 daN-m) |...

Canrig Top Drive 275 Ton & Stand Alone VFD House

Certified capacity (api 8c): 275 tons (249 tonnes) | Output power (continuous): 600 HP (450 kW) | Maximum speed: 225 RPM | Continuous drill torque: 30,000 ft-lb (4,067 daN-m) | Maximum torque: 60,000 ft-lb (8,13...

Stama MC Machining Center

• Manufacturer: Stama
• Model: MC

Good condition Stama MC Machining Centers available between 1990 and 2008 years. Located in Germany and other countries. Click request price for more information.