Machine Tools » Thuringia

Search By Category

Search By Manufacturer

Building Filters

274

Used Machine Tools in Thuringia, Germany

  • 1978 MÜLLER CD 63.12.14

    1978 MÜLLER CD 63.12.14

    • Manufacturer: Muller
    • Power requirement: 22 kW

    - workspace enclosure with Sick light barrier - large plunger with ejector and trunnion clamping piece - foot switch - motorized depth stop in cylinder

    Schmölln, Germany
  • KEPROMA AG DOD 40/100

    KEPROMA AG DOD 40/100

    • Manufacturer: ambold pressen- und maschinenbau

    - Demonstration model with branded overhauled control system - NC roll feed servo power with direct drive - plasma nitrided rolls - backlash free drive - strip side guide Performance data at 180 degrees - 1000 st...

    Schmölln, Germany
  • 1986 JELSINGRAD BPA 15

    1986 JELSINGRAD BPA 15

    • Manufacturer: Jelsingrad

    Run only 2 years High-speed Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 015 t | Installation height: - mm | Hubzahlen per minute: 200 – 2000 | Table surface: - mm...

    Schmölln, Germany
  • 1977 DUNKES ESPZ 63/28

    1977 DUNKES ESPZ 63/28

    • Manufacturer: Dunkes
    • Model: ESPZ 6328

    - Draw cushion Press not safe for manual insertion work

    Schmölln, Germany
  • 1981 MÜLLER SZ 40.30.1

    1981 MÜLLER SZ 40.30.1

    • Manufacturer: Muller
    • Model: SZ 40301
    • Power requirement: 15 kW

    with hydr. Die cushion speeds: Rapid advance speed 240 mm / s continuously adjustable

    Schmölln, Germany
  • WANZKE GMD I

    WANZKE GMD I

    • Manufacturer: ambold pressen- und maschinenbau
    • Power requirement: 0.25 kW

    - Motorized double-turn reel - newly painted Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Coil weight: 2 x 0.15 t | Span area: 265 - 485 mm | Bandwidth: 200 mm | Tape streng...

    Schmölln, Germany
  • GSW-SCHWABE MHM 1,5/1250

    GSW-SCHWABE MHM 1,5/1250

    • Manufacturer: Herman-Schwabe

    - Manual spreading - motor-driven - pressure roller - new lacquering

    Schmölln, Germany
  • 2013 CHIN FONG G2-160 V

    2013 CHIN FONG G2-160 V

    • Manufacturer: CHIN FONG
    • Power requirement: 11 kW

    - safe for manual insertion - Conversion to west - Light barrier

    Schmölln, Germany
  • 1997 ZEULENRODA PED 100/3

    1997 ZEULENRODA PED 100/3

    • Manufacturer: Zeulenroda
    • Model: PED 1003

    - Increased installation height - with draw cushion - converted to safe control (Pilz PLC), safe for manual insertion work on the open mold

    Schmölln, Germany
  • no-image_en.png

    1971 WEINGARTEN ARS 160

    • Manufacturer: Weingarten
    • Model: ARS 160
    • Stroke length: 455 mm

    *with wheel transmission *with fixed work table *with enlarged table and ram surface *with enlarged throat *with passage in the body *with ram weight compensation The machine is currently being inspected and the ...

    Schmölln, Germany
  • CO2 laser machine MAZAK TX510

    CO2 laser machine MAZAK TX510 2,0kW

    • Manufacturer: Mazak

    The used 2D laser machine is in a technically very good condition and can be visited anytime. Request a detailed offer if you are interested!

    Großrudestedt, Germany
  • CO2 laser machine MAZAK STX510

    CO2 laser machine MAZAK STX510 MkIII 2,5kW

    • Manufacturer: Mazak

    The used 2D laser machine is in a technically perfect condition and can currently still be viewed under power. The laser machine STX 510 MkIII 2.5 kW is in top condition with few operating hours. Table size: 3000...

    Großrudestedt, Germany
  • 1999 CO2 laser machine MAZAK

    1999 CO2 laser machine MAZAK NTX48 1,5kW

    • Manufacturer: Mazak

    The used 2D laser machine is in a technically perfect condition and can be visited at any time. Special features: CAD / CAM programming software Absaugungsanlage Balls table cooler Mazak L32B control encapsulated...

    Großrudestedt, Germany
  • CO2 laser machine MAZAK STX510

    CO2 laser machine MAZAK STX510 MkIII 2,5kW

    • Manufacturer: Mazak

    The used 2D laser machine is in a technically perfect condition and can currently still be viewed under power. The laser machine STX 510 MkIII 2.5 kW is in top condition with few operating hours. Table size: 3000...

    Großrudestedt, Germany
  • CO2 laser cutting machine MAZAK

    CO2 laser cutting machine MAZAK HG510 4,0kW

    • Manufacturer: Mazak
    • Model: HYPER GEAR 510

    The used laser machine can be inspected and tested under power at any time. Included: automatic cutting head change automatic nozzle change auto focus fast piercing shuttle table Linear motors on all axes FE up t...

    Großrudestedt, Germany
1516171819

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.