Machine Tools » Thuringia

Search By Category

Search By Manufacturer

Building Filters

49

Used table type in Thuringia, Germany

  • AMBOLD PEEV 40.3

    AMBOLD PEEV 40.3

    • Manufacturer: ambold pressen- und maschinenbau
    • Power requirement: 3.5 kW

    - Ortlinghaus pneumatic clutch / brake combination - Central lubrication bird - Balluff cam switch - Height adjustable table - Control cabinet with touchscreen - foot switch

    Schmölln, Germany
  • 1965 WEINGARTEN XRR III sp

    1965 WEINGARTEN XRR III sp

    • Manufacturer: Weingarten
    • Model: XRR III SP

    - with additional brake - Tappet weight compensation - Motorized ram adjustment - Central grease lubrication (manual) - break plate - table platen - safe for manual inlay work - Operating instructions available

    Schmölln, Germany
  • AMBOLD PEEV 55.3

    AMBOLD PEEV 55.3

    • Manufacturer: ambold pressen- und maschinenbau
    • Power requirement: 4.5 kW

    - pneumatic clutch-brake combination - Central lubrication bird - Balluff cam switch - Height adjustable table - mechan. Overload protection in the ram (break plate) - Control cabinet with touchscreen - foot switch

    Schmölln, Germany
  • 1990 HELMERDING ERH 75 B

    1990 HELMERDING ERH 75 B

    • Manufacturer: HELMERDING

    Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear train in an oil bath - Fixed table prepared for hanging tool changing consoles - 2 roller strips in the table ...

    Schmölln, Germany
  • 1990 HYDRAP HPSK-100 CNC

    1990 HYDRAP HPSK-100 CNC

    • Manufacturer: ambold
    • Power requirement: 22 kW

    - Ejector in the table, pressure force 40 t, stroke 100 mm - laterally movable work area guarding with BWS (light barrier) this with cycle operation - Cooling, behind the machine, accumulation water tank (beige) ...

    Schmölln, Germany
  • 1984 HYLATECHNIK HESSP 100 1.5

    1984 HYLATECHNIK HESSP 100 1.5 XA4

    • Manufacturer: Hylatechnik

    - Fine stroke adjustment - Cutting shock damping - Oil extraction - 2 cylinders - Roll feed from Dreher, type WAV, control PMS3000 from Dreher - Soundproof booth - Machine was overhauled in 2001 and equipped with...

    Schmölln, Germany
  • 1988 MABU 15 TFK

    1988 MABU 15 TFK

    • Manufacturer: Mabu
    • Power requirement: 1.1 kW

    - friction-locked Ortlinghaus clutch - but not for manual insertion work - Press was tested in our company and delivered with current UVV

    Schmölln, Germany
  • 2019 AMBOLD PEEV 40.2

    2019 AMBOLD PEEV 40.2

    • Manufacturer: AMBOLD
    • Power requirement: 3.5 kW

    - pneumatic clutch (Ambold) - Separate clamping plate - Press safety valve - Two-hand control panel - Balluff cam switch unit - Foot switch - Switch cabinet with ABB safety control and touchscreen display

    Schmölln, Germany
  • 1986 ZEULENRODA PYE 160 S1M

    1986 ZEULENRODA PYE 160 S1M

    • Manufacturer: Zeulenroda
    • Model: PYE 160
    • Stroke length: 200 mm
    • Daylight: 500 mm

    Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 160 t | Discharge: 360 mm | Hub: 500 mm | Speed off: 200 mm/sec | Speed up: 125 mm/sec | Distance table - ram: 1000 m...

    Schmölln, Germany
  • 1979 ZEULENRODA PYE 10 S1

    1979 ZEULENRODA PYE 10 S1

    • Manufacturer: Zeulenroda
    • Model: PYE 10
    • Power requirement: 5.2 kW

    Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 10 t | Discharge: 250 mm | Hub: 400 mm | Speed off: 100 mm/sec | Speed up: 450 mm/sec | Distance table - ram: 630 mm ...

    Schmölln, Germany
  • 2007 SICMI KP 100

    2007 SICMI KP 100

    • Manufacturer: SICMI
    • Power requirement: 2.2 kW

    Hydraulic workshop press The machine is of the Italian make SICMI, which was traded by the Knuth company.

    Schmölln, Germany
  • 2007 EBU H 125 FRIV

    2007 EBU H 125 FRIV

    • Manufacturer: EBU
    • Model: H125

    – with hydraulically actuated multi-disc wet clutch and spring-applied safety brake – hydraulic overload protection – hydraulic connecting rod clamping – motorized ram height adjustment – semi-automatic stroke a...

    Schmölln, Germany
  • 1987 ZEULENRODA PEDV 63

    1987 ZEULENRODA PEDV 63

    • Manufacturer: Zeulenroda
    • Power requirement: 6 kW

    Machine is dismantled and partially overhauled -new color scheme -new control cabinet -conversion to safe operation -repair

    Schmölln, Germany
  • 1986 JELSINGRAD BPA 15

    1986 JELSINGRAD BPA 15

    • Manufacturer: Jelsingrad

    Run only 2 years High-speed Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 015 t | Installation height: - mm | Hubzahlen per minute: 200 – 2000 | Table surface: - mm...

    Schmölln, Germany
  • no-image_en.png

    1971 WEINGARTEN ARS 160

    • Manufacturer: Weingarten
    • Model: ARS 160
    • Stroke length: 455 mm

    *with wheel transmission *with fixed work table *with enlarged table and ram surface *with enlarged throat *with passage in the body *with ram weight compensation The machine is currently being inspected and the ...

    Schmölln, Germany
1234

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.