Machine Tools » Thuringia

Building Filters

61

Used freight in Thuringia, Germany

  • BAD SALZUNGEN MR + MHD

    BAD SALZUNGEN MR + MHD 250/4

    • Manufacturer: ambold pressen- und maschinenbau

    Reel MHR 250/4: gr. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm unbraked reel with pressure roller Straightening machine MR 250/4: Coil infeed height: 1250 mm The machine was dismantled, checked and ...

    Schmölln, Germany
  • 1984 MÜLLER CD 100.11.69

    1984 MÜLLER CD 100.11.69

    • Manufacturer: Muller
    • Power requirement: 30 kW

    - Machine was overhauled in 2008 - Work area enclosure with Sick light barrier - Installation height 580 mm - without large ram with ejector and pin clamping piece - Conversion of hydraulics to proportional valve...

    Schmölln, Germany
  • 1993 SMERAL S 160

    1993 SMERAL S 160

    • Manufacturer: Šmeral Brno
    • Model: S 160
    • Power requirement: 15 kW

    - Additional clamping plate - cross-grooved - foot switch - hydr. clutch - hydr. clamping ball spindle - hydr. overload - Flywheel brake - Hydraulics with oil cooler Machine can be partially overhauled by us for ...

    Schmölln, Germany
  • 1978 MÜLLER CD 63.12.14

    1978 MÜLLER CD 63.12.14

    • Manufacturer: Muller
    • Power requirement: 22 kW

    - workspace enclosure with Sick light barrier - large plunger with ejector and trunnion clamping piece - foot switch - motorized depth stop in cylinder

    Schmölln, Germany
  • ZEULENRODA PED 63/2

    ZEULENRODA PED 63/2

    • Manufacturer: Zeulenroda
    • Power requirement: 6 kW

    The following work is to be carried out on the machine / Partial overhaul: - Machine is dismantled, checked - Machine is repainted - New lubrication unit Vogel - New cam switch unit - New control cabinet with tou...

    Schmölln, Germany
  • 1969 ZEULENRODA PEDN 63/2

    1969 ZEULENRODA PEDN 63/2

    • Manufacturer: Zeulenroda
    • Power requirement: 6 kW

    - inclinable - ram is equipped with breaking plate safety device - table clamping plate - Ram adjustment by means of ratchet - Balluff cam indexing system Machine is not safe for manual insertion operation!

    Schmölln, Germany
  • 1989 KOHLER 150.2/150.1

    1989 KOHLER 150.2/150.1

    • Manufacturer: Kohler
    • Model: 15021501
    • Power requirement: 2 kW

    -Coil rewinding system with 3 single spools decoiler, type 150.2: - Spool width: 140 mm -Spreading: bolt spreading manually - Coil outer diameter: 800 mm -Brake: disc brake pneu. -Side shift: manually via spindle...

    Schmölln, Germany
  • 1982 ZEULENRODA PED 63/3

    1982 ZEULENRODA PED 63/3

    • Manufacturer: Zeulenroda
    • Power requirement: 6 kW

    The following work is to be carried out on the machine / Partial overhaul: - Machine is completely dismantled, checked - Machine is repainted - New press safety valve - New separate control cabinet with touch pan...

    Schmölln, Germany
  • AMBOLD JH25 – 200

    AMBOLD JH25 – 200

    • Manufacturer: ambold
    • Power requirement: 22 kW

    - pneumatic clutch - press safety valve, Herion - cam controller, Balluff - chain breakage monitoring - hydr. overload, HYDAC - motor. Ram adjustment with digital display - separate control cabinet with safety co...

    Schmölln, Germany
  • 2023 WEINGARTEN ARP 80

    2023 WEINGARTEN ARP 80

    • Manufacturer: Weingarten
    • Model: ARP 80
    • Power requirement: 7.5 kW

    Equipment: - with wheel storage - fixed table Machine has been / will be partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled over - New seals and hydraulic hoses - New main...

    Schmölln, Germany
  • 1980 Schuler CR 80-345

    1980 Schuler CR 80-345

    • Manufacturer: Schuler
    • Model: CR 80-345
    • Stroke length: 480 mm

    Additional Information: - the machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate control cabinet with touchscreen including cabling * N...

    Schmölln, Germany
  • AMBOLD PEEV 25.4

    AMBOLD PEEV 25.4

    • Manufacturer: ambold pressen- und maschinenbau

    - Ortlinghaus hydraulic clutch-brake combination - Central lubrication bird - Balluff cam switch - Height adjustable table - Control cabinet with touchscreen - foot switch

    Schmölln, Germany
  • 2025 IWK PEKRD 125

    2025 IWK PEKRD 125

    • Manufacturer: ambold pressen- und maschinenbau
    • Stroke length: 400 mm
    • Power requirement: 16 kW

    – The machine has been partially overhauled – It has been completely disassembled and technically inspected – New seals – New pneumatic coupling – New seals in the compensating cylinder – New drive motor – New ba...

    Schmölln, Germany
  • 1958 RICHTER PED 160

    1958 RICHTER PED 160

    • Manufacturer: ambold pressen- und maschinenbau

    2003 Modernization / Retrofitting The following work is still to be carried out on the machine: - new control cabinet with ABB SPS - separate two-hand control input with foot switch - Vogel loss lubrication

    Schmölln, Germany
  • 2013 CHIN FONG G2-160 V

    2013 CHIN FONG G2-160 V

    • Manufacturer: CHIN FONG
    • Power requirement: 11 kW

    - safe for manual insertion - Conversion to west - Light barrier

    Schmölln, Germany
12345

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.