Machine Tools » Thuringia

Search By Category

Search By Manufacturer

Building Filters

49

Used table type in Thuringia, Germany

  • 1997 ZEULENRODA PED 100/3

    1997 ZEULENRODA PED 100/3

    • Manufacturer: Zeulenroda
    • Model: PED 1003

    - Increased installation height - with draw cushion - converted to safe control (Pilz PLC), safe for manual insertion work on the open mold

    Schmölln, Germany
  • 1979 KAISER PO 75 Z

    1979 KAISER PO 75 Z

    • Manufacturer: Kaiser
    • Model: PO 75 Z
    • Power requirement: 7.5 kW

    - pneum. Ortlinghaus air clutch with additional brake - Infinitely variable speed control using Stöhrer drive - break plate - 2-hand control - additional platen - Air storage tank for clutch - circulating oil lub...

    Schmölln, Germany
  • ZEULENRODA PED 63/2

    ZEULENRODA PED 63/2

    • Manufacturer: Zeulenroda
    • Power requirement: 6 kW

    The following work is to be carried out on the machine / Partial overhaul: - Machine is dismantled, checked - Machine is repainted - New lubrication unit Vogel - New cam switch unit - New control cabinet with tou...

    Schmölln, Germany
  • AMBOLD JH25 – 200

    AMBOLD JH25 – 200

    • Manufacturer: ambold
    • Power requirement: 22 kW

    - pneumatic clutch - press safety valve, Herion - cam controller, Balluff - chain breakage monitoring - hydr. overload, HYDAC - motor. Ram adjustment with digital display - separate control cabinet with safety co...

    Schmölln, Germany
  • 1990 dirinler CD/PC 800 HK

    1990 dirinler CD/PC 800 HK

    • Manufacturer: Dirinler
    • Power requirement: 5.5 kW

    - Ram weight compensation Machine to be partially overhauled in our company in the coming year (disassembly, inspection, new paintwork, new wiring, new control cabinet)

    Schmölln, Germany
  • 1986 KAISER V 40 W/680

    1986 KAISER V 40 W/680

    • Manufacturer: Kaiser
    • Model: V 40 W/680
    • Power requirement: 8 kW

    - Tappet with 2 connecting rods - Unidor tool monitoring - Kaiser right gripper feed, band width 180 mm, feed length 150 mm, max. 2nd mm - Kaiser scrap scissors on the left - soundproof cladding - Eccentric shaft...

    Schmölln, Germany
  • 1988 HELMERDING ERH 100 B

    1988 HELMERDING ERH 100 B

    • Manufacturer: HELMERDING

    Equipment: - Final drive - shaft with 3 bearings - Semi-automatic stroke adjustment - circulating oil lubrication - Hydraulic clutch - Separate hydraulics with oil cooler The machine is partially overhauled by us...

    Schmölln, Germany
  • 1980 EDELHOFF HZP 100

    1980 EDELHOFF HZP 100

    • Manufacturer: EDELHOFF
    • Power requirement: 11 kW

    with shock absorption and die cushion Machine without control cabinet

    Schmölln, Germany
  • 1992 TOX-Pressotechnik PC 30.56

    1992 TOX-Pressotechnik PC 30.56

    • Manufacturer: TOX Pressotechnik
    • Stroke length: 200 mm
    • Throat depth: 250 mm

    Power pack press - The presses are equipped with a pneumohydraulic power cylinder. equipped. This divides the total stroke into an air-driven, and a hydraulic power stroke that starts automatically when the press...

    Schmölln, Germany
  • ZEULENRODA PYE 10 S S

    ZEULENRODA PYE 10 S S

    • Manufacturer: Zeulenroda
    • Model: PYE 10
    • Power requirement: 8.5 kW

    - without clamping plate - only approved for work with closed tools

    Schmölln, Germany
  • 1978 MÜLLER CD 63.12.14

    1978 MÜLLER CD 63.12.14

    • Manufacturer: Muller
    • Power requirement: 22 kW

    - workspace enclosure with Sick light barrier - large plunger with ejector and trunnion clamping piece - foot switch - motorized depth stop in cylinder

    Schmölln, Germany
  • 1984 MÜLLER CD 100.11.69

    1984 MÜLLER CD 100.11.69

    • Manufacturer: Muller
    • Power requirement: 30 kW

    - Machine was overhauled in 2008 - Work area enclosure with Sick light barrier - Installation height 580 mm - without large ram with ejector and pin clamping piece - Conversion of hydraulics to proportional valve...

    Schmölln, Germany
  • 1993 SMERAL S 160

    1993 SMERAL S 160

    • Manufacturer: Šmeral Brno
    • Model: S 160
    • Power requirement: 15 kW

    - Additional clamping plate - cross-grooved - foot switch - hydr. clutch - hydr. clamping ball spindle - hydr. overload - Flywheel brake - Hydraulics with oil cooler Machine can be partially overhauled by us for ...

    Schmölln, Germany
  • 1982 ZEULENRODA PED 63/3

    1982 ZEULENRODA PED 63/3

    • Manufacturer: Zeulenroda
    • Power requirement: 6 kW

    The following work is to be carried out on the machine / Partial overhaul: - Machine is completely dismantled, checked - Machine is repainted - New press safety valve - New separate control cabinet with touch pan...

    Schmölln, Germany
  • 1980 Schuler CR 80-345

    1980 Schuler CR 80-345

    • Manufacturer: Schuler
    • Model: CR 80-345
    • Stroke length: 480 mm

    Additional Information: - the machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate control cabinet with touchscreen including cabling * N...

    Schmölln, Germany
1234

Overview

Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

FAQ

What should I consider when buying a used machine tool?

Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

How do I ensure the machine tool is shipped safely to my location?

Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for machine tools?

Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.