Machine Tools

Search By Category

Search By Manufacturer

Search By Country

Building Filters

295

Used api

  • Trusted Seller
    7" (177MM) ABBEY ETNA 6KU

    7" (177MM) ABBEY ETNA 6KU API TUBE MILL

    • Manufacturer: Abbey Etna

    Thickness Range: 2.65mm to 7.20mm Shaft Diameter: 4.5" Abbey Etna 6KU API Consisting of: Coil Storage Unit Double Cone Uncoiler Hold Down Roll 5 Roll Sheet Straightener 60HP DC Motor Shear and End Welder ...

    Mansfield, OH
  • Trusted Seller
    130" (3,300mm) x 1"(25.4mm) Blohm

    130" (3,300mm) x 1"(25.4mm) Blohm & Voss API Spiral Pipe Mill with Hydrotester

    • Manufacturer: Blohm+Voss

    130" (3,300mm) x 1"(25.4mm) Blohm & Voss API Spiral Pipe Mill with Hydrotester and (2) Beveling Machines Manufacturer: Blohm & Voss Year: 1978 Diameter 16" to 130" Wall 0.250" to 1.000" Grade up to X80 Pipe Le...

    Mansfield, OH
  • Trusted Seller
    72" (1,800mm) x 1" (25.4mm)

    72" (1,800mm) x 1" (25.4mm) Blohm & Voss (2 Step) API Spiral Pipe Mill (Capable

    • Manufacturer: Blohm+Voss

    72" (1,800mm) x 1" (25.4mm) Blohm & Voss (2 Step) API Spiral Pipe Mill (Capable of 130" Diameter) with Two Off-Line Welding System Manufacturer: Blohm & Voss Year:1982 Diameter 24" to 72" (original 16" to 130")...

    Mansfield, OH
  • Sub Adapter 4-1/2" Reg API

    Sub Adapter 4-1/2" Reg API x 4-1/2" API Pin x 24" L

      Sub Adapter 4-1/2" Reg API x 4-1/2" API Pin x 24" L Shoulder to Shoulder Length, 3-1/2" Wrench Flats, Good Used Located in Mifflinburg, PA USA

      Mifflinburg, PA
    • 9' 8" Drill Collars With

      9' 8" Drill Collars With 4-1/2 API Reg

      • Manufacturer: Aftermarket

      - (2) 5-3/4” Dia. X 9’ 8” Shoulder To Shoulder Drill Collars With 4-1/2 API Reg. Threads On Pin & Box Ends. - (3) 6” Dia. X 9’ 8” Shoulder To Shoulder Drill Collars With 4-1/2 API Reg. Threads On Pin & Box Ends. ...

      Mifflinburg, PA
    • Trusted Seller
      3PE Anti-corrosion Steel Pipe Production

      3PE Anti-corrosion Steel Pipe Production Line

      • Manufacturer: TXH

      Fearures of 3PE Anti-corrosion Steel Pipe Production Line 1. The company's equipment performance standards are strictly followed Coating standard:  API RP 5L2, GB/T 23257, GOST R 51164, GOST R 52568, DIN30670, DI...

      Cangzhou, China
    • 6-5/8" API x 4" IF,

      6-5/8" API x 4" IF, 9" Length Sub Adapter - 1106120610157

        Used 6-5/8" API x 4" IF Sub Adapter 9" Length Shoulder to Shoulder No Wrench Flats Good Used EW item # 1106120610157 Located in Mifflinburg, PA USA

        Mifflinburg, PA
      • 18" cable tool drill chisel

        18" cable tool drill chisel bit, 31" length, 4" x 5" API pin thread.

        • Manufacturer: Aftermarket

        · 19" Cable Tool Drill Chisel Bit · Overall Length: 31" · Thread Connection: 4" X 5" Api Pin (Protected) · Condition: - Body Has Surface Rust from Outdoor Storage - Threads Are Protected And in Working Condit...

        Mifflinburg, PA
      • 14-3/4" Cable Tool Drill Chisel

        14-3/4" Cable Tool Drill Chisel Bit, 35" Length, 4" X 5" API Pin Thread.

        • Manufacturer: Aftermarket

        14-3/4" Cable Tool Drill Chisel Bit · Length: 35" · Connection: 4" X 5" API Pin Thread (Protected) · Condition: - Stored Outdoors, Resulting in Some Rust on the Body - Threads Were Protected—No Damage - Ready...

        Mifflinburg, PA
      • 16-3/4" Twisted Drill Bit For

        16-3/4" Twisted Drill Bit For Cable Tool Rigs 70" L X 4" X 5" API Pin Thread

        • Manufacturer: Aftermarket

        · 16-3/4" Cable Tool Drill Chisel Bit · Specifications: - 70" Length - 4" X 5" Api Pin Thread (Protected) - Complete With Lifting Bail · Additional Information: - Twisted Bits Spin More Than Regular Ones, Dri...

        Mifflinburg, PA
      • LANDIS 2" STATIONARY PIPE THREADING

        LANDIS 2" STATIONARY PIPE THREADING HEAD: STOCK # 66865

        • Manufacturer: Landis

        APPROXIMATE WEIGHT OF HEAD .. 140 LBS. Stock#: 66865 | Pipe sizes: 1/4" TO 2" | Chasher holders: 1/4" TO 2" | Hole thru head: 2-5/8" | Equipped with api: 11-1/2 DIES

        Holland, OH
      • Trusted Seller
        BRONX TAYLOR WILSON 6CR-9 6

        BRONX TAYLOR WILSON 6CR-9 6 ROLLS STRAIGHTENING MACHINE

        • Manufacturer: Bronx

        1. Name: Bronx 6CR 2. Brand: Bronx - Taylor Wilson 3. Model : 6CR-9 4. Year: 2013 5. Description 6 rolls Straightening Machine Main function is to eliminate any defects in pipe straightness due to thermal shock...

        Mansfield, OH
      • Trusted Seller
        60" (1524mm) x 1" (25.4mm)

        60" (1524mm) x 1" (25.4mm) SMS 2-STEP SAWH SPIRAL PIPE MILL, NEW 2009

        • Manufacturer: PWS (SMS)

        60" (1524mm) x 1" (25.4mm) SMS 2- STEP SAWH SPIRAL PIPE MILL, NEW 2009 GENERAL SPIRAL MILL SPECIFICATIONS: MANUFACTURER - PWS (SMS) YEAR - 2009 TYPE - 2-STEP SUBMERGED-ARC WELDED HELICAL (SAWH) PIPE DIAMETER ...

        Mansfield, OH
      • Trusted Seller
        2023 Okuma Genos L3000 MYW-EX

        2023 Okuma Genos L3000 MYW-EX 15499

        • Manufacturer: Okuma
        • Model: GENOS L3000
        • Spindle bore: 3,150 mm

        Y-Axis: 3.94" W-Axis (Sub-Spindle): 20.47" X-axis Accuracy: 0.00047” (0.012 mm) over any 4” (100mm) of stroke Z-axis Accuracy: 0.00078” (0.020 mm) over any 12” (300mm) of stroke Thermo Active Stabilization Therma...

        Maitland, FL
      • Stabilizer for running above 12”-class

        Stabilizer for running above 12”-class tricone or DTH hammer bit

        • Manufacturer: Aftermarket

        Used – Stabilizer for running above 12”-class tricone or DTH hammer bit - Around 10-3/4" OD Including Ribs (Barrel Itself Around - 10" Plus Ribs Makes It Around 10-3/4" Outside Diameter) - 15 Ft. Shoulder-To-Sho...

        Mifflinburg, PA
      1415161718

      Overview

      Machine tools are devices used in manufacturing to shape or machine metal and other rigid materials, typically by cutting, boring, grinding, shearing, or other forms of deformation. They are essential in producing precise and complex parts in industries such as automotive, aerospace, and electronics, and include a variety of machines like lathes, milling machines, and CNC machines.

      FAQ

      What should I consider when buying a used machine tool?

      Evaluate the machine's condition, age, and maintenance history. Check for any signs of wear or damage and ensure it meets your specific production requirements.

      How do I ensure the machine tool is shipped safely to my location?

      Hire a transport service experienced in moving heavy machinery. Ensure the machine is properly secured and protected to prevent damage during transit.

      What is the maintenance schedule for machine tools?

      Regular maintenance includes lubricating moving parts, inspecting for wear and tear, and calibrating for accuracy. Follow the manufacturer's guidelines for specific maintenance tasks and intervals.