• 1990 Steinel BZ 20 104266

    No price - Kuala Lumpur, Malaysia
    • Manufacturer: Steinel

    the machine is in good avu, in agreement tours running. rs: bosch cc330m working feed: x400 y310 z320 spindle power: 15 kw range of revolutions: 32 to 7100 1 / min torque 174 nm (already at 32 rev ...

  • 1996 OKK KCH 600 104254

    No price - Kuala Lumpur, Malaysia
    • Manufacturer: OKK

    the machine is in good avu, in agreement tours running. pallet 630x630 mm, 60 tools in the chain iso din 50 positioning table 1 °, 43kw, x range of 32 "- 820 mm y range of 32 "- 820 mm from the ran...

  • FA 4V 104652

    No price - Kuala Lumpur, Malaysia

      the machine is in good technical condition. technical parameters: width of working table: 315 mm length of working table: 1600 mm after the possibility of inspection.

    • 2006 Feeder FV-600SE Vertical Machining Center

      No price - Johor, Malaysia
      • Manufacturer: Feeder

      mitsubishi control country: malaysia | division: cnc machine tools | machine name: vertical machining center

    • 2009 Top Well TM-1268 Vertical Machining Center

      No price - Johor, Malaysia
      • Manufacturer: Mitsubishi
      • Control: Mitsubishi

      control : mitsubishi x axis (longitudinal) 1200 (48") y axis (cross) 680 (26.3") z axis (vertical) 610 (24") spindle nose to table surface 125-725 (5" - 28.5") spindle center to column surface 720 ...

    • Abawerk - Vertical Miller

      No price - Johor, Malaysia
      • Manufacturer: Miller

      - country: malaysia | division: conventional machine tools | machine name: vertical miller

    • Lagun FTV-1S Vertical Miller

      No price - Johor, Malaysia
      • Manufacturer: Lagun

      - country: malaysia | division: conventional machine tools | machine name: vertical miller

    • Luxmill - Vertical Miller

      No price - Johor, Malaysia
      • Manufacturer: Miller

      motor: 3hp spindle: nt40 power feed: gear type elevating reducer motor for knee up/down & x axis

    • Nantong - Vertical Miller

      No price - Johor, Malaysia
      • Manufacturer: Miller

      motor: 2hp motor: 2hp | country: malaysia | division: conventional machine tools | machine name: vertical miller

    • Pinnacle 16VS Vertical Miller

      No price - Johor, Malaysia
      • Manufacturer: Miller
      • Spindle Taper: R8

      motor ,:3hp working surface :1270mm x 254mm longitual travel (x) :800mm cross travel (y) :426mm vertical travel (z) :446mm spindle taper :r8