• 2013 YCM SUPERMAX NXV1020A VMC TK-20618

    • Manufacturer: Supermax

      motor: 25 hp maximum spindle speed: 12,000 rpm spindle drive: isolated direct drive spindle nose to table: 5.5” – 26.78” size: 44” x 20.5” t-slots (number x width x pitch): 5 x .71” x 3.93” maximum load: 1,100 lb...

      $57,500
      Bethlehem, PA, USA
    • 2000 HAAS MINI MILL VMC HB-20602

      • Manufacturer: Haas

        length (total): 36″ length (work surface): 28.75″ width: 12″ maximum weight on table: 500 lbs t-slot width: .625″ number of t-slots: 3 center distance: 4.92″ taper size: # 40 taper speed: 0 – 6,000 rpm transmissi...

        $24,500
        Bethlehem, PA, USA
      • 2000 HAAS MINI MILL VMC HB-20603

        • Manufacturer: Haas

          length (total): 36″ length (work surface): 28.75″ width: 12″ maximum weight on table: 500 lbs t-slot width: .625″ number of t-slots: 3 center distance: 4.92″ taper size: # 40 taper speed: 0 – 6,000 rpm transmissi...

          $24,500
          Bethlehem, PA, USA
        • 2001 HAAS MINI MILL VMC HB-20604

          • Manufacturer: Haas

            length (total): 36″ length (work surface): 28.75″ width: 12″ maximum weight on table: 500 lbs t-slot width: .625″ number of t-slots: 3 center distance: 4.92″ taper size: # 40 taper speed: 0 – 6,000 rpm transmissi...

            $24,500
            Bethlehem, PA, USA
          • 2000 HAAS MINI MILL VMC HB-20605

            • Manufacturer: Haas

              length (total): 36″ length (work surface): 28.75″ width: 12″ maximum weight on table: 500 lbs t-slot width: .625″ number of t-slots: 3 center distance: 4.92″ taper size: # 40 taper speed: 0 – 6,000 rpm transmissi...

              $24,500
              Bethlehem, PA, USA
            • 2011 BROTHER TC-S2DN-0 CNC DRILL/TAP CENTER TK-20607

              • Manufacturer: Brother

                table surface: 31.5” x 15.7” maximum load on table: 661 lbs spindle speed: 10,000 rpm maximum spindle speed in tapping: 6,000 rpm spindle taper hole: no. 30 rapid traverse:   1,969 ipm cutting feedrate (x,y:1): ....

                $64,500
                Bethlehem, PA, USA
              • 2011 HAAS VF-3YT/50 VMC TK-20591

                • Manufacturer: Haas

                  length:  52″ width:  23″ table capacity:  4,000 lbs drive: 40 hp, vector speed:  7,500 rpm taper:  cat-50 maximum torque: 236 ft-lb @ 700 rpm, 340 ft-lb @ 575 rpm drive system: 2-speed geared head rapids (x,y,z):...

                  $59,500
                  Bethlehem, PA, USA
                • 1994 FADAL VMC20 VMC CK-20546

                  • Manufacturer: Fadal

                    cutting feed rate (x/y/z): .01”-250” (375” at 150%) rapid feed rate (x/y/z): 400 ipm axis drive motor (x/y/z): dc, 1,800 lb thrust ballscrew size (x/y/z): 1.25” diameter x axis: 20” y-axis: 16” z-axis: 20” spindl...

                    $9,500
                    Bethlehem, PA, USA
                  • 2004 FADAL 4020HT VMC CK-20545

                    • Manufacturer: Fadal

                      cutting feed rate (x/y/z): .01″ – 400 ipm (600″ at 150%) rapid feed rate (x/y/z): 900 ipm (x, y) 700 (z) axis drive motor (x/y/z): ac 3,800 lbs (peak) thrust longitudinal (x-axis): 40″ cross (y-axis): 20″ vertica...

                      $22,500
                      Bethlehem, PA, USA
                    • 1992 EMCO VMC 200 VMC TK-20165

                      • Manufacturer: Emco

                        size: 25.5” x 12.75” maximum table load: 400 lbs t-slots: 3 slot distance: 3.93” turret: 12 stations tool change time: 7.6 seconds main motor: 13.5/9 hp speed range: 150 – 4,500 rpm equipped with emcotronic tm02 ...

                        $7,500
                        Bethlehem, PA, USA