Used off shell

Atrump EL22

• Manufacturer: Atrump
• Spindle taper: CAT 40
• Power requirement: 9.6 kW

35.4" x 17.7" atrump EL22, New #SMEL22 Capacity: 35.4" x 17.7" | Table: 35.4” X 17.7” | X travel: 27.5" | Y travel: 17.7" | Z travel: 20.4" | Spindle nose to tabletop: 4.3" To 25.9" | Table load capacity: 1,320 ...

Atrump EL32

• Manufacturer: Atrump
• Spindle taper: CAT 40
• Power requirement: 9.6 kW

35.4" x 19.68" atrump EL32, New #SMEL32 Capacity: 35.4" x 19.68" | Table: 35.4” X 19.68” | X travel: 31.5" | Y travel: 20.5" | Z travel: 21.6" | Spindle nose to tabletop: 4.3" To 25.9" | Table load capacity: 1,3...

Shell reamer from Günther – Ø 37 mm Titex-Special 29177

• Manufacturer: Günther

Machine reamers, reamer, reaming tool, fitting knife cutting set

Atrump BM-780H

• Manufacturer: Atrump
• Spindle taper: CAT 40

98" x 33" x 27" atrump BM-780H, New #SMBM780H Capacity: 98" x 33" x 27" | Table size: 32" x 108" | Load capacity: 4,400 LBS. | Longitudinal travel (x): 98" | Cross travel (y): 33" | Vertical head travel (z): 27...

Atrump LH-87 CENTRIOD

• Manufacturer: Atrump
• Spindle taper: CAT 40

33" x 24" x 28" atrump LH-87 CENTRIOD, New #SMLH87Centroid

Atrump LH-117 CENTROID

• Manufacturer: Atrump
• Spindle taper: CAT 50

43" x 35" x 27" atrump LH-117 CENTROID, New #SMLH117CENTROID

1990 Leadwell MCV-1000

• Manufacturer: Leadwell
• Model: MCV1000

Series #-L94163 Volts 550-600, Equipped With: Fanuc OMF Control BT 40 Taper 24 Tool Carrier All Manuals 4th Axis 3 Off TG100 Collet Holders 2 Off ER16 Collet Holders 3 Off 1” Shell Mill Holders 1 Off ¾” Shell Mil...

Atrump EL32S

• Manufacturer: Atrump
• Power requirement: 13.6 kW

39.3" x 23.6" atrump EL32S, New #SMELS32S Capacity: 39.3" x 23.6" | X travel: 29.3" (745mm) | Y travel: 17.7" (450mm) | Z travel: 21.6" (500mm) | Spindle nose to tabletop: 3.9" to 25.6" (100- 650mm) | Table load...

Atrump AL32

• Manufacturer: Atrump
• Power requirement: 13.6 kW

39.3" x 23.6" atrump AL32, New #SMAL32 Capacity: 39.3" x 23.6" | Table: 39.3" x 23.6" | Longitudinal travel (x-axis): 33.4" (860mm) | Cross travel (y-axis): 23.6" (600mm) | Vertical travel (z axis): 24" (610mm)...

NATIONAL SHELL END MILL 7" DIAMETER 4" WIDTH 3/4" ARBOR 16-TEETH

“SOME SURFACE RUST.” NATIONAL SHELL MILL 71628 *NOTE: SOME SURFACE RUST. 7" OUTSIDE DIAMETER 4" WIDTH 1-1/2" ARBOR 16-TEETH APPROX OAD: 7" X 7" X 4" APPROX WEIGHT: 30 LBS HG-1429-R12-3-(1)-ABI

MX3-M Brass Shellers

• Manufacturer: Unknown

MX3-M Medium size machine with working cycle for front and side casting. Especially suitable for hydrosanitary fittings.Ejector/extractor cylinders on the heads. Arrangement of flanges in front of the 'operator f...

P2N Brass Shellers

• Manufacturer: Unknown

P2N Medium-sized machine with working cycle for front and side casting. Especially suitable for hydrosanitary fittings. Its simplicity and functional construction ensure its long operation without maintenance pro...

NAL 1000/R UNIVERSAL

• Manufacturer: Unknown

NAL 1000/R UNIVERSAL Automatic shell machine, of modern design, allows excellent working safety, with high and constant productivity. Prepared for the most advanced automation (continuous service). Suitable for 2...

NAL 1200/R UNIVERSAL

• Manufacturer: Unknown

NAL 1200/R UNIVERSAL Automatic shell machine, of modern design, allows excellent working safety, with high and constant productivity. Prepared for the most advanced automation (continuous service). Suitable for 2...

Mobile Phone Shell Mold Processing CNC Vertical Machining Center as Makino

• Manufacturer: EsTop
• Model: ET-M6

Estop Turbo Compressor Processing Chinese High-Precision CNC Machining Center ET-H9 -This machine tool uses a granite bed with strong shock absorption and anti-magnetic interference capabilities, and uses a linea...