MAIER JGA.F
- Manufacturer: Maier
Wing discharge device design Suitable for all flowable bulk goods, especially with difficult-flowing products due to the forced conveyance, very reliable. Round, square or square cells can be completely emptied w...
Gossau, Switzerland
MAIER JSD.S
- Manufacturer: Maier
Mechanical sampler design The rotating worm shaft enables continuous sampling of any quantity from the product. A spiral conveys the sample through the sampling tube directly into an optionally available collecti...
Gossau, Switzerland
MAIER JDC.B
- Manufacturer: Maier
Fluid bed dryer Design MAIER fluid bed dryers are based on the principle of fluid bed technology. Here, the product to be dried/cooled flows on an inflow floor from the inlet to the outlet of the machine. The res...
Gossau, Switzerland
MAIER JCB.S
- Manufacturer: Maier
Single-shaft tuber breaker design The solid welded construction can optionally be equipped with different tools, tailored to the product to be shredded. The stator is adapted to the rotor-specific tool. Due to th...
Gossau, Switzerland
MAIER JDP.R
- Manufacturer: Maier
Round - silo design The round silo is the most stable form of a storage container and does not need any cross bracing inside the silo, even with large volumes. Internals can hinder the mass flow and leave product...
Gossau, Switzerland
MAIER JKF.C
- Manufacturer: Maier
Redler Design Conveyor trough with drive and return station. The product-specific chain is guided on both sides via sprockets and is tensioned on one side. To reduce wear on the chain and the machine, it runs on ...
Gossau, Switzerland
MAIER JSO.S
- Manufacturer: Maier
Corner - silo design If the space is to be used optimally, a storage silo with a rectangular cross-section is the best choice. In the case of angular silos, it is important to ensure that the pressure in the silo...
Gossau, Switzerland
MAIER JDP.R
- Manufacturer: Maier
Round - depot design Round depots are often attached to the floor or ceiling via three support brackets and supports or suspensions. Round silos often have a conical discharge funnel, i.e. the entire silo has no ...
Gossau, Switzerland
MAIER JMV-T
- Manufacturer: Maier
Vertical double shaft mixer Design The housing consists of two overlapping cylinders with large cleaning doors and is bolted to the mixer cover via a flange. The bearing of the two mixing tools is offset from the...
Gossau, Switzerland
MAIER JSC.R
- Manufacturer: Maier
Ascending snail design We use the ascending screw for feeding machines on the same floor with high inlets. The unit has a storage container, which serves as a hopper. The funnel can be filled manually or automati...
Gossau, Switzerland
MAIER JSC.T
- Manufacturer: Maier
Pipe screw Design Tubular screws in different diameters from 100-250 mm and variable length are used as conveying, collecting and metering elements. Rather suitable for short distances. The pitch of a fully threa...
Gossau, Switzerland
MAIER JVF.C
- Manufacturer: Maier
Vibrating channel design The vibrating channel consists of a folded trough, a drive console with drives and four rubber buffers. Round rubber buffers or linear vibration elements are used as vibration dampers. A ...
Gossau, Switzerland
Tip: Enter manufacturer, model or keyword