Building Filters
- Trusted Seller
DELTA-V steel filing cabinet
used
- Manufacturer: Delta
Hanging filing cabinet, drawer cabinet, tool cabinet, filing cabinet, hanging file cabinet DELTA-V BASE LINE 840 x 620 x 1320 mm 4 drawers: width 760 mm, depth: 540 mm, height: 280 mm used, tested !
$258 USDZschepplin, Germany - Trusted Seller
BIELLA office file with roll container
new
Federal file with roll container, 110 pieces BIELLA DINOR-COLOR 80 pieces 103 414 30 pieces 103 417 Format: A4 All folders are new ! used, checked !
$229 USDZschepplin, Germany - Trusted Seller
Bosch CUT 120 horizontal cartoning machine, 150 cartons/min
used
- Manufacturer: Bosch
Bosch CUT 120 horizontal cartoning machine with right-angle belt feed (400 x 80 mm (LxW)) and automatic product inserter (blisters, tubes, sachets, etc.) into the bucket infeed of the machine, intermittend motion...
Raguhn-Jeßnitz, Germany - Trusted Seller
IWKA/Netzsch/Laetus/Mettler Toledo Garvens/Skinetta complete tube filling & packing line for conical aluminum tubes, 180 tubes/min.
used
- Manufacturer: Garvens
IWKA/Netzsch/Laetus/Mettler Toledo Garvens/Skinetta complete tube filling & packing line for conical aluminum tubes comprising: IWKA TZK 200 automatic tube feeding system for conical shaped tubes, suitable for co...
Raguhn-Jeßnitz, Germany - Trusted Seller
Uhlmann C2504 continuous motion cartoner
used
- Manufacturer: Uhlmann
- Model: C 2504
Uhlmann C2504 continuous motion cartoner, carton size range min. 30x15x65 mm (AxBxH), max. 80x90x155 mm (AxBxH) Blister/tray size range min. 30x3.5x60 mm (LxWxH), max. 75x12x150 mm (LxWxH), suitable for blister c...
Raguhn-Jeßnitz, Germany - Trusted Seller
Uhlmann C-130 horizontal cartoning machine for blisters, 120 cartons/min.
used
- Manufacturer: Uhlmann
Uhlmann C-130 horizontal cartoning machine for blisters with blister fedeer suitable for blisters containing ampoules, etc., format range carton min. 30 x 15 x 70 mm, max. 100 x 85 x 150 mm, format range blister ...
Raguhn-Jeßnitz, Germany 
Folding Machine Hesse+Co GmbH
used
- Manufacturer: Hesse
Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is mis...
Leipzig, Germany
2021 dmsDIGITAL 375PRO+375KF
used
Year of construction 2021 Equipment details here ready for demonstration in the showroom
Dresden, Germany
1988 Strojaren XONM 2000/2A-5
used
- Manufacturer: Strojaren
HYDRAULIC FOLDING MACHINE operation via control panel with boom as well as via foot switch bending angle: sharp bending = up to 135° with 2mm sheet metal stroke of the upper beam = 250mm stroke of the lower beam ...
Leipzig, Germany
1992 Stückmann&Hillen 241 05
used
- Manufacturer: Stückmann&Hillen
This is a hydraulic swing bending machine bending capacity 2,5mm with approx. 400N/mm² strength Hydraulic OILTECH with approx. 200 liters
Leipzig, Germany
1982 FASTI 2045 - 15/1,5
used
- Manufacturer: Fasti
- Model: 2045 - 1515
- adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (peda...
Leipzig, Germany
WMW SBM 1000-1
used
- Manufacturer: WMW
- This swivel bending machine is equipped with two rear supports. Size of the round steel support = Ø 25 x 750mm, with linear scale. - Left side with counterweight.
Leipzig, Germany
2004 RAS 64.25
used
- Manufacturer: RAS
- Model: 6425
Hydraulic Folding Machine, electronically controlled. -max. sheet thickness at 400 N/mm² 2,5 mm according to manufacturer -smallest permissible bending radius 1.25 x sheet thickness -opening of the upper beam max...
Leipzig, Germany