• CIM HP 600 1 10103

    No price - Marietta, GA, USA Recently Added
      • Stroke: 900 mm

      force: 600 ton | bolster: 5,500 / 1,500 mm | daylight: 2,200 mm | oil tank: 100 liter | up speed: 150 mm/second | down speed: 100 mm/second | pressing speed: 4 mm/second | stroke - up/down: 900 mm...

    • 2013 CIM TEK CIMBR3 110T x 420L 10247

      No price - Marietta, GA, USA Recently Added
      • Manufacturer: Tek
      • Capacity: 25 ton - 110 ton x 4,200 mm

      main control panel x 1 remote control panel x 1 accessory tool for resolution & assembly x 1 set

    • CIM 4000 AUTOMATIC CROISSANT FORMING LINE - 76902

      No price - New York, NY, USA

        cim 4000 automatic croissant forming line - 76902 cim 4000 automatic croissant forming line rated at 4000 pieces/hr. located in new york. see below video of the same model running. the video is not...

      • Little Giant 10E-CIM .5HP Submersible Effluent Pump- The Eliminnator

        No price - Ventura, CA, USA
        • Manufacturer: Giant

        little giant 10e-cim .5hp submersible effluent pump- the eliminnator 115v - 60hz 10.5a 1ph

      • 2013 CIM TEK HP7000 7, 000 Ton Hydraulic Press

        No price - Marietta, GA, USA
        • Manufacturer: Tek
        • Capacity: 250/220 cc/rev
        • Stroke: 1,500 mm

        type: hydraulic | stroke: 1,500 mm | tonnage: 7,000 | capacity: 250/220 cc/rev | material: sc49 | stroke 2: 1,400 mm | capacity 2: 250 hp | oil cooler: 1,000 liter | speed - up: 189 mm/sec | upper...

      • CIM HP 600 1 Ton Hydraulic Dishing Press

        No price - Marietta, GA, USA
          • Stroke: 900 mm

          type: hydraulic dishing press | force: 600 ton | bolster: 5,500 / 1,500 mm | tonnage: 600 | daylight: 2,200 mm | oil tank: 100 liter | up speed: 150 mm/second | down speed: 100 mm/second | pressin...

        • 2013 CIM TEK CIMBR3 110T x 420L 3-Roll Bender

          No price - Marietta, GA, USA
          • Manufacturer: Tek
          • Capacity: 25 ton - 110 ton x 4,200 mm

          roll bender type – 3 bottom roll shaft main control panel x 1 remote control panel x 1 accessory tool for resolution & assembly x 1 set

        • CIM 3000 Croissantanlage 12708

          $4,203 - Babenhausen, Germany
          • Manufacturer: Cim

          machine is mobile, cutting station and winders stainless steel for unfilled croissants output per hour: about 3,000 pieces, connection: 400 v, 16 a cee plugs

        • CIM TRS - AS2 Croissantanlage 13105

          $9,523 - Babenhausen, Germany
          • Manufacturer: CIM

          is mobile, croissant station and 2 winders stainless steel for unfilled croissants output per hour: about 6000 pieces, connection: 400 v, 16 a cee plugs

        • CIM 4000 Croissant Linie 13334

          $15,748 - Babenhausen, Germany

            cim 4000 croissant line type of machine: croissant plants