• 25″ TROYKE DL-25A ROTARY TABLE

    No price - Bannockburn, IL, USA

      25″ troyke model dl-25a rotary table new 2005 equipped with: pneumatic brake, 30″ x 30″ x 1-1/4″ steel drilled & tapped sub plate specifictions:

    • MARQ HPA-SLD-T-RH-DL

      No price - Ball Ground, GA, USA
      • Manufacturer: MARQ

      directview 1000, directlogic 06 koyo. operating temperature range: 40 deg f to 120 deg f. electrical: 110v, 3ph, 60hz, 14 fla.

    • 15165 9.5" TROYKE 4TH AXIS ROTARY TABLE DL-9-B

      $3,950 - York, PA, USA
      • Manufacturer: TROYKE

      troyke 4th axis rotary table price: loaded on truck, our warehouse, york, pa ………… $3,950.00 stock # 15165-p serial # 5027-3 model # dl-9-b platen size: 9-1/2" with t-slots centerline height: 6.3...

    • 2014 Ammbusher DL-72

      $6,995 - Tulsa, OK, USA
      • Manufacturer: Ammbusher

      width: 86" | blades: 4 | height: 35" | length: 86" | weight: 2100 lbs | blade size: 5" x 17" | brush size: 6" | drive motor: direct drive gear motor, bi-dir. | cutting width: 72" | hydraulic requi...

    • 2014 Ammbusher DL-72

      $6,995 - Tulsa, OK, USA
      • Manufacturer: Ammbusher

      width: 86" | blades: 4 | height: 35" | length: 86" | weight: 2100 lbs | blade size: 5" x 17" | brush size: 6" | drive motor: direct drive gear motor, bi-dir. | cutting width: 72" | hydraulic requi...

    • MARQ PACKAGING HPE315-3RH-DL 13090

      No price - Shoemakersville, PA, USA
      • Manufacturer: MARQ PACKAGING

      carton erector - model #: hpe315-3rh-dl - serial #: q01048 - footprint: 93" l x 87" w x 80" h - weight: 3000 pounds

    • DAHLIH VERTICAL RIGID HEAD CNC KNEE MILL FRAME

      No price - Cleveland, OH, USA
      • Manufacturer: DAHLIH

      vertical rigid head cnc knee mill frame no control manual variable speed head 80-3800 rpm # 40 taper spindle pneumatic drawbar travels: x axis: 29-1/2" y axis: 16-1/2" (spindle) z axis: 6" knee: ...

    • 1988 Cleaver Brooks DL-94 5791

      No price - Kansas, United States Recently Added
      • Manufacturer: Cleaver-Brooks

      cleaver brooks boiler, model dl-94 water tube with dearator and return tank. 1988

    • Dah Lih DL-MCV1500 Vertical Machining Center

      No price - Houston, TX, USA Recently Added

        dah lih dl-mcv1500 vertical machining center67 x 26.8 table, fanuc 18m, 40 atc with ct50 gripper.tsudakoma rb250r 4th axis w/2.7 bore, 10 3-jaw chuck & tailstocknew 06/2001. serial no. 15000808. st...

      • DAH LIH DL-MCV1500 Vertical Machining Center

        No price - Houston, TX, USA Recently Added

          dah lih dl-mcv1500 vertical machining center67 x 26.8 table, fanuc 18m, 40 atc with ct50 gripper.tsudakoma rb250r 4th axis w/2.7 bore, 10 3-jaw chuck & tailstocknew 12/2002. serial no. 15000844. st...