Used esimec

1999 Esimec RAM 806

• Manufacturer: Esimec

Bandwidth: 800 mm | Max thickness: 3 mm | No. of rollers: 15

1999 Esimec AE 1000×2,5

• Manufacturer: Esimec

Bandwidth: 1000 mm | Max thickness: 2,5 mm | Number of drive rollers: 2

ESIMEC 800X2

• Manufacturer: ESIMEC

Typology: N. 1 Semi-compacted feeding line for presses, year 1988 N. 1 Semi-compact feeding line for presses, year 1988 | Movable motorized decoiler capacity kg.10.000 ø ext. coil: 1500 mm ø int. coil

ESIMEC calender 1.000 x 3mm.

• Manufacturer: ESIMEC

Max width tape: 1,000 mm. | Max thickness tape: 0.5-2.5mm. | Diameter of the rollers: 80 mm. | Number of rolls: n° 9 | Introduction ramps: Present

Power supply lines ESIMEC product code: 25692

Hurry! This product has already been viewed 3,575 times! Don't miss out! ENGLISH BELOW No. 1 Semi-compact feeding line for balers, year 1988. No. 1 Semi-compact feeding line for balers, year 1988. 1 Semi-compact ...

ROVETTA 400 ton

• Manufacturer: Rovetta
• Model: S2-400

Ton: 400 | Frame: H FRAME | Table - x: 1600 | Table - y: 1200 | Table - extractable - frontal: YES | Slide - piston rods: 2 | Table - width (mm): 1600 | Slide - stroke (mm): 300 | Extractable - frontal: YES | Pi...

1991 ROVETTA S2 400-1600-1200 matricola 2537/1 PR33

• Manufacturer: Rovetta
• Model: S2-400

Typology: TWO-POST MECHANICAL ECCENTRIC PRESS | Nominal power at 12,5 mm from p.m.i.: 400 t | Lower mould tray dimension: 1600 x 1200 mm | Deck size for sledgehammer moulds: 1600 x 1200 mm | Maximum shoulder cle...

MECHANICAL EXCENTRIC PRESS WITH TWO MOUNTING posts Construction : Model : ROVETTA S2 400-1600-1200 cod.516.400.02 product code: 20521

• Manufacturer: Rovetta
• Model: S2-400

Hurry! This product has already been viewed 7,354 times! Don't miss out! Selected machine Like-new condition TWO-POST MECHANICAL ECCENTRIC PRESS Serial number: 2537/1 PR33 Year: 1991 Lateral passage in shoulders:...