Building Filters
- Trusted Seller
BOSCH HOFLIGER & KARG DOS 1B
- Manufacturer: Bosch
Used vertical volumetric powder filler by Bosch Hofliger + Karg model DOS 1B. Machine had been working on filling cosmetic powders into 100 ml containers. Output adjustable depending on rotation of screws. Machin...
Hainesport, NJ - Trusted Seller
Hofliger and Karg model GKF50 powder filler.
- Manufacturer: HOFLIGER & KARG
Hofliger & Karg model GKF50 powder filler. -Support to hopper. -Auger. -Missing hopper, nozzles, knobs. -1/2 HP, 3 phases, 60 cycles, 220 volts motor.
Mexico - Trusted Seller
Round table by Karges - Type 190 20414
- Manufacturer: Karges Hammer
Rotary table, rotary dividing table, dividing head, dividing apparatus
Wiefelstede, Germany - Trusted Seller
Karges Hammer ASts 230
- Manufacturer: Karges Hammer
Tooling: 45 mm | Can shape: round | Speed (up to): 150-300 strokes per minute | Stroke: 75 mm | Tonnage: 40 T
Middelharnis, Netherlands - Trusted SellerMiddelharnis, Netherlands
- Trusted Seller
Karges Hammer AGR 100
- Manufacturer: Karges Hammer
Tooling: 127 mm | Can / ends diameter minimum: 50 mm | Can / ends diameter maximum: 100 mm | Can shape: round | Speed (up to): 350 ends per minute
Middelharnis, Netherlands - Trusted Seller
Karges Hammer SSfd 1000
- Manufacturer: Karges Hammer
Quality used double roller shear (total 10 cutters) with A1 feeder.
Middelharnis, Netherlands - Trusted Seller
Karges Hammer PNS 240
- Manufacturer: Karges Hammer
Quality pre-owned strip feed press with double die tooling for diameter 83 mm shell ends. With new control cabinet.
Middelharnis, Netherlands - Trusted Seller
Karges Hammer ASts 200/2
- Manufacturer: Karges Hammer
Tooling: 70 mm | Can shape: round | Speed (up to): 600 ends per minute | Tonnage: 30 T
Middelharnis, Netherlands - Trusted Seller
1963 Karges Hammer ABSZ 115
- Manufacturer: Karges Hammer
Quality used die-flanger with one side tooled for diameter Ø 99 mm and other side for Ø 96 mm.
Middelharnis, Netherlands - Trusted Seller
Karges Hammer P 4
- Manufacturer: Karges Hammer
Tooling: 52 mm | Can shape: round | Stroke: 50 mm | Tonnage: 32 T
Middelharnis, Netherlands - Trusted Seller
Karges Hammer SD 1150
- Manufacturer: Karges Hammer
Speed (up to): 3000 sheets per hour | Sheet width max.: 1150 mm
Middelharnis, Netherlands - Trusted Seller
Karges Hammer ASts 226/2
- Manufacturer: Karges Hammer
REFURBISHED strip feed press for making ends with double disc curling station. Speed 400 ends per minute.
Middelharnis, Netherlands - Trusted Seller
Karges Hammer DAR 115/2
- Manufacturer: Karges Hammer
Pre-owned double disc curler. Tooling: 99 mm | Can / ends diameter minimum: 40 mm | Can / ends diameter maximum: 115 mm | Can shape: round | Speed (up to): 700 ends per minute
Middelharnis, Netherlands - Trusted Seller
1979 Karges Hammer DAR 175/1
- Manufacturer: Karges Hammer
Pre-owned single disc curler. Tooling: 127 mm | Can / ends diameter minimum: 50 mm | Can / ends diameter maximum: 175 mm | Can shape: round | Speed (up to): 250 ends per minute
Middelharnis, Netherlands
