Building Filters
- Trusted Seller
KLEISER 16.0 Sq. M.
- Manufacturer: KLEISER
Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg...
Hainesport, NJ - Trusted Seller
Stainless Steel 316 Kleiser und Losch Gmbh Contactor Column - IPP# 212764
- Manufacturer: Kleiser und Losch Gmbh
column chamber in (4) bolted sections, approx (20) blades on shaft water cooled mechanical seals (3) s/steel centrifugal pumps
Princeton Junction, NJ - Trusted Seller
Rising/Falling Film Evaporator Stainless Steel Austenitic - IPP# 220581
- Manufacturer: Kleiser Gmbh
both sides , 4.685 l internal, 1.100 l jacket total height 8.550 mm
Princeton Junction, NJ - Trusted Seller
Contactor Column 597 mm (23.5 in) Stainless Steel 316 - IPP# 212763
- Manufacturer: Kleiser and Losch
drive - 90-389 rpm 1465/305 rpm Eurodrive motor, approx (20) blades on shaft, water cooled mechanical seals (3) s/steel centrifugal pumps
Princeton Junction, NJ - Trusted Seller
Rising/Falling Film Evaporator 9,400 kg/h (20,723 lb/h) Stainless Steel 316 - IPP# 706886
- Manufacturer: Kleiser Gmbh
single effect falling film evaporator pressure internal -1/6 bar @ 200 degrees C (1291 liter), jacket -1/6 bar @ 200 degrees C (1020 liter) 9.4 m3/hour evaporation rate single pass tubeside, 316Ti (1.4571) stainl...
Princeton Junction, NJ - Trusted Seller
Rising/Falling Film Evaporator 12 kg/h (26.5 lb/h) Stainless Steel Austenitic - IPP# 220572
- Manufacturer: Kleiser Gmbh
1.4571/HII falling film evaporator carbon steel shell internal; -1/9 bar @ 250 ° C jacket, internal 1291 l, jacket 1.020 l
Princeton Junction, NJ - Trusted Seller
Packed Column 1,300 mm (51.2 in) Stainless Steel Austenitic - IPP# 220592
- Manufacturer: International Process Plants
2 x packed seactions, top section 1.3m diameter x 2340mm high, bottom section 1.3m diameter x 4160mm high, 12m straight side built to TUV
Princeton Junction, NJ - Trusted Seller
Shell and Tube Heat Exchanger 6.6 m² (71 ft²) Stainless Steel 316 - IPP# 81656
- Manufacturer: Kleiser Losch
Loose saddles.
Princeton Junction, NJ - Trusted Seller
Rising/Falling Film Evaporator 6,700 kg/h (14,771 lb/h) Stainless Steel Austenitic - IPP# 706887
- Manufacturer: Kleiser Gmbh
single effect vertical falling film evaporator jacket -1/6 bar @ 200 degrees C (1100 liter), 6.7 m3/hour evaporation rate Fabrik #3981 single pass tubeside, 316Ti (1.4571) stainless steel tubesheets, 800mm diamet...
Princeton Junction, NJ - Trusted Seller
Packed Column 1,000 mm (39.4 in) Stainless Steel Austenitic - IPP# 220560
- Manufacturer: International Process Plants
built to TUV
Princeton Junction, NJ - Trusted Seller
Batch-Type Agitated Reactor 8,600 L (2,272 gallons) Stainless Steel Austenitic - IPP# 230182
- Manufacturer: Kleiser und Losch Gmbh
internal pressure -1/+0.5 bar @ 200 degrees C (8600 liter), coil jacket 6 bar @ 200 degrees C (278 liter) Coil jacket volume: 278 liter Internal baffle plates on sidewall
Princeton Junction, NJ - Trusted Seller
Kleiser 1600 Ltr - Stainless Steel Reactor
- Manufacturer: Kleiser
General SKU R1192 Location Barneveld Make Kleiser GmbH (DE) Type 1600 Ltr No. 3071 Year of construction 1991 Pressure Working pressure 3.2 Bar Vacuum possible check Working pressure jacket 16 Bar Main Features Ma...
Barneveld, Netherlands - Trusted Seller
2750 liter heat-/coolable pressure tank, Aisi 316
- Manufacturer: Kleiser und Lösch
max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 16.0 bar max. allowable working temperature (dj): 200 °C Temperature control cylinder (dj): half-coil temperature control botto...
- Trusted Seller
5850 liter heat-/coolable pressure vessel, Aisi 316 with blades agitator
- Manufacturer: Kleiser und Lösch
max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 200 °C Temperature control cylinder (dj): half-coil temperature control bottom...
- Trusted Seller
1345 liter heat-/coolable pressure tank, Aisi 316
- Manufacturer: Kleiser und Lösch
max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 16.0 bar max. allowable working temperature (dj): 200 °C Temperature control cylinder (dj): half-coil temperature control botto...