• 2001 Mack LE

    $29,900 - Manassas, VA, USA
    • Manufacturer: Mack

    a/c: yes | gvw: 62,000 | color: white | odometer: 147,679 | body make: kann | rear axle: 44,000 | body model: side load | front axle: 18,000 | attachments: 2 tippers | engine make: mack | horse po...

  • 1996 Mack LE 613

    $23,900 - Manassas, VA, USA
    • Manufacturer: Mack

    a/c: no | gvw: 66,000 | color: white & red | odometer: 211,126 | body make: labrie | rear axle: 44,000 | body model: expert 2000 | front axle: 20,000 | attachments: driver's side tipper | engine m...

  • 1996 Mack LE 613

    $24,900 - Manassas, VA, USA
    • Manufacturer: Mack

    a/c: no | gvw: 62,000 | color: green | odometer: 127,586 | body make: heil | rear axle: 44,000 | front axle: 18,000 | engine make: mack | horse power: 300 | engine model: e7 | transmission type: a...

  • Atlas Copco LE 40

    $750 - Weatherby, MO, USA
    • Manufacturer: Atlas-Copco

    runs well, sounds good. power source: electric | horsepower (hp): 5

  • 200 Square Feet Les Usines De Melle Sa Shell Tube - Stainless Heat Exchanger #202768

    No price - West Windsor Township, NJ, USA Recently Added
    • Manufacturer: Les Usines de Melle SA
    • Capacity: 200 SQUARE FEET / 19 SQUARE METER

    18.6 sq m vertical 316 s/steel tubes, tube sheets, heads, and shell, heat exchanger. manufactured by les usines de melle sa, shell 315 mm diameter x 6120 mm overall length. (54) 22mm diameter x 5m ...

  • 1993 Butler Elgamill LE 4000/VCI

    No price - Smyrna, TN, USA
    • Manufacturer: Butler
    • Spindle Diameter: 5"

    60 tool atc maximum: 2100 rpm | spindle taper: 50 | spindle diameter: 5" | z-axis (spindle): 41" | y-axis (vertical): 98" | spindle drive motor: 40 hp | x-axis (longitudinal): 354" | spindle speed ...

  • PMI LE and LS TYPE SAW FEATURES

    No price - Addison, IL, USA
    • Manufacturer: LS
    • Motor: 15 (LE), 20 HP (LS)
    • Weight: 5060 lbs

    powerful crosscut sawhead design sawhead moves on precision linear guideways type le - 15 hp motor allows for sawing of extrusions and tubes type ls- 20 hpmotor enables sawing of solid bars and ext...

  • 1984 ZTS LE-400 Gap / C Frame Cold Press

    No price - Washington, PA, USA
    • Manufacturer: ZTS
    • Capacity: 400.00 ton 3985 kN
    • Stroke: 6.30 in 160.00 mm

    throat size 18 inch (450mm), height shown is above floor level, number of strokes admitted per minute 20

  • CEPA LE 66385

    No price - La Porte, TX, USA
    • Manufacturer: CEPA

    built in 1983; lab/pilot size; hp: 0 | qty: 1 | v/h: v | alloy: s | ratio: 0.00 | remarks: frame only | bowl speed: 0 | driver rpm: 0 | diameter(in"): 0 | # of separations: 0

  • 2005 Cleaver-Brooks CB-LE-100-500-150

    No price - Cleveland, OH, USA
    • Manufacturer: Cleaver-Brooks

    one (1) used 500 hp cleaver brooks packaged steam boiler, model cb-le-100-500-150, low emission design, oil fired, rated up to 17,250 pounds of steam per hour, 16.74 million btu/hr, 150 psi, with ...