Building Filters
- Trusted Seller
Nikko Yozai Mfg Co Lot Of 4 Welding Rods - Bk-660r
- Manufacturer: Nikko Yozai Mfg Co
New Open Box, Made In Japan Name: Lot Of 4 Welding Rods | Arrival date: 10-24-2025 | Dimensions l x w x h (inches): 41 x 5 x 3 | Weight (lb.): 47 | Available quantity: 1
$90 USDEuclid, OH - Trusted Seller
Nikko Yozai Mfg Co 39 1/2" Lot Of 3 Welding Rods - Bk-660r
- Manufacturer: Nikko Yozai Mfg Co
New Open Box, Made In Japan Name: Lot Of 3 Welding Rods | Arrival date: 10-24-2025 | Dimensions l x w x h (inches): 41 x 5 x 3 | Capacity: 39 1/2" | Weight (lb.): 35 | Available quantity: 1
$72 USDEuclid, OH NIKKO PRECISION CNC LATHE CHUCK 816188 H 8.5" 1.95" 8" INCH
- Manufacturer: Fanuc
THIS PART CAME FROM A FULLY FUNCTIONAL SNK-SUT70 CNC LATHE WITH FANUC CONTROL THAT WE DISMANTLED.
$270 USDLos Angeles, CATAKAMATSU EM-2A CNC LATHE NIKKO PRECISION GAMET HYDRAULIC ACTUATOR G 45020 3978
- Manufacturer: Fanuc
THIS PART WAS REMOVED FROM A TAKAMATSU EM-2A CNC LATHE WITH FANUC CONTROL THAT WE DISMANTLED.
$600 USDSanta Clarita, CASUGA ST-100 CNC LATHE NIKKO-PRECISION HYDRAULIC ACTUATOR DRAWBAR 814435 45/110
NEXT DAY UPS AIR SERVICE AVAILABLE ON OUR UPS ACCOUNT ONLY. THIS PART CAME FROM A SUGA ST-100 CNC LATHE THAT WE DISMANTLED
$360 USDLos Angeles, CATRAUB TND 200 CNC LATHE NIKKO-PRECISION HYDRAULIC ACTUATOR 52/105FR 520323
- Manufacturer: Fanuc
THIS PART CAME FROM A 1988 TAKAMATSU TAKAMAZ VT CNC LATHE WITH FANUC CONTROL THAT WE DISMANTLED.
$360 USDLos Angeles, CA- Trusted Seller
2001 Nakamura Tome WT-250
- Manufacturer: Nakamura tome
- Model: WT-250
Cutting time – 4,926 hours Swing Over Bed 9.84” Swing Over Carriage 9.84” Max Turing Diameter 9.84” St. Turning Diameter 3.94” Max Turning Length 17.13” Max Bar Size 2.01” Spindle Motor 20 HP Spindle Speed 4500 R...
- Trusted Seller
Starter 24 V from Nikko - 0-21000-3391 9325
- Manufacturer: Nikko
Bosch starter motor Voltage: 24 V 7.5 kW | Type: 0-21000-3391 | Teeth: 11 | Mass: 15 | Dimensions: half pallet | Internal storage: 133107
Wiefelstede, Germany 
1995 Nikko 105 XR Arrow-Cut / Die Cutter
- Manufacturer: Arrow
- Maximum sheet size: 105 x 75 cm (41 x 29 inch)
We are pleased to offer: Used NIKKO 105 XR Arrow-Cut / Die-Cutter Year 1995 Specification The NIKKO 105 XR Arrow Cut is a robust, high-performance automatic flatbed die-cutting and stripping machine designed for ...
Ringwood, United Kingdom- Trusted Seller
2001 NIKKO N 105 XR
- Manufacturer: NIKKO
24,000 HOURS OF OPERATION MAX FORMAT 740 X 1050 MM - SPEED 7500/H PRESSURE FORCE 300 TONS CLEANING SECTION NON-STOP - OVERLAY + LINING 2 FRAMES - PUNCHING AND CLEANING WIDE RANGE OF RAW MATERIAL WEIGHTS. - PT/PVC...
Noisy-le-Sec, France 
1989 Nikko Machine NFG-515A
- Manufacturer: Nikko Machine
Ei-magnet chuck size 250 x 125 with left/right and front/rear feeds, with top/bottom rapid feeds, with front/rear digital scale, with dust collector (dry type) If there is any discrepancy between the contents and...
Tatebayashi, Japan
1989 Nikko Machine NFG-515A
- Manufacturer: Nikko Machine
Permanent magnetic chuck size 250 x 130 with left/right and front/rear feed with up/down fast feed with front/rear digital scale with dust collector (dry type) If there is any discrepancy between the contents and...
Tatebayashi, Japan
2006 Nikko Machine NSG-64H
- Manufacturer: Nikko Machine
Chuck size 600×400 Fully automatic, automatic infeed, with magnetic separator, with cutting tank, with dust collector ★Test cutting has been performed! (Photos are being posted.) In case of any discrepancy betwee...
Tatebayashi, Japan- Trusted Seller
Noisy-le-Sec, France NIKKO PRECISION CNC MANUAL LATHE 8" INCH CHUCK 816188H
- Manufacturer: Fanuc
“120 DAY WARRANTY. REMOVED FROM MACHINE” WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION NEXT DAY AIR SERVICE AVAILABLE ON ALL PARTS. PLEASE CALL FOR DETAILS. 120 DAY WARRANTY ON ALL PARTS CHUCK PA...
$270 USDLos Angeles, CA
