Building Filters
30T 10”X10”, TWO PRESSES W/HYD UNIT, 29” DL., 22” STR.
TWO PRESSES ON A COMMON BASE WITH CONTROLS AND HYDRAULIC UNITS. 10” X 10” NOMINAL PLATEN SIZE. DISTANCE BETWEEN SLAB SIDES 11” L TO R, DAYLIGHT 29 ½”. APPROX STROKE 22”, DOUBLE ACTING MAIN RAM 5 ½” BORE, 4 ¼” ROD...
Grand Rapids, MI
30T 10”X10”, TWO PRESSES W/HYD UNIT, 28” DL., 22” STR.
TWO PRESSES ON A COMMON BASE WITH CONTROLS AND HYDRAULIC UNITS. 10” X 10” NOMINAL PLATEN SIZE. DISTANCE BETWEEN SLAB SIDES IS 11” L TO R. DAYLIGHT WITH PLATENS 28”, DAYLIGHT WITHOUT 31”. TWO ELECTRIC PLATENS 10” ...
Grand Rapids, MI- Trusted Seller
29.5 TON NEFF HYDRAULIC C FRAME PRESS
- Manufacturer: Neff
- Stroke length: 254 mm
- Daylight: 609.6 mm
The NEFF DF-25-15M is a robust 29.5-ton hydraulic C-frame press, ideal for various industrial applications. This used press was built in 2005 and has several key features that offer both efficiency and safety. It...
Ohio, USA - Trusted Seller
42 TON NEFF C FRAME HYDRAULIC PRESS
- Manufacturer: Neff
The used NEFF D40-15M is a robust 42-ton C frame hydraulic press, suitable for industrial applications requiring precise force and control. This machine features palm buttons and light curtains for enhanced safet...
Ohio, USA - Trusted Seller
Pac-Press Model 470 | 31 / 470mm Plate Filter Press
- Manufacturer: Pacific Press Co
Unit is USED. Unit shows some signs of wear / rust / paint peeling / scratches but none effecting the intended use of the filter press. This unit was recently removed from service with no issues noted by the prev...
Hiram, OH - Trusted Seller
66 TON AIDA GAP FRAME PRESS
- Manufacturer: Aida
- Model: NC1-600
- Stroke length: 139.95 mm
- Shut height: 299.72 mm
This used 66-ton AIDA Gap Frame Press, model NC1-600(2)E, is designed for versatile industrial applications. It has a stroke length of 5.51 inches and a slide adjustment range of up to 2.7 inches, allowing for pr...
Monclova, OH - Trusted Seller
STRAIGHTING PRESS C-FRAME
- Manufacturer: STRAIGHTING PRESS
C-FRAME HYDRAULIC STRAIGHTENING PRESS, 16" THROAT APPROX. 16- 18" STROKE MUST VERIFY 5 1/2"CYLINDER 15 1/2' BED AREA 2" THICK STEEL FABRICATION 16" X 84" BED, 5 HP HYDRAULIC UNIT, FRONT SUPPORT FIXTURE, GAGE ...
Cleveland, OH - Trusted Seller
75 TON PARKER HEAVY-DUTY H-FRAME HYDRAULIC SHOP PRESS w/10 HP PARKER PUMP - VICKERS VALVES
- Manufacturer: Vickers
75 TON PARKER HEAVY-DUTY H-FRAME HYDRAULIC SHOP PRESS EQUIPPED WITH: 10 HP Parker Denison #PUP233OR221 Hydraulic Pump & Tank Vickers Valves 18" x 17" Removable Die Set CATALOG SPECIFICATIONS: Tonnage Capacity, Ap...
- Trusted Seller
30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12"
- Manufacturer: Wabash
- Model: G302-CX
30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12" Used 30 ton Wabash Genesis platen press, model G302-CX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 4" daylight, 17" wide tie ...
Cleveland, OH - Trusted Seller
100 TON THOMSON-NATIONAL “28X41” CLAMSHELL-DESIGN HEATED PLATEN DIE CUTTING & CREASING PRESS w/MINSTER AIR CLUTCH & BRAKE - 45” X 31” MAXIMUM SHEET SIZE
- Manufacturer: Minster
- Capacity: 100,000 kg
28X41 THOMSON-NATIONAL CLAMSHELL-DESIGN HEATED-PLATEN Imperial Metric DIE CUTTING & CREASING PRESS Model 28X41 EQUIPPED WITH: 28x41 Heated Platen (Serial No 1492) Minster Combination Air Clutch & Brake (24-14581)...
- Trusted Seller
250 TON NIAGARA MODEL SE4-250-84-60 STRAIGHT SIDE PRESS/VAMCO FEEDER/LITTELL BACK END
- Manufacturer: Niagara
- Capacity: 250,000 kg
- Stroke length: 152.4 mm
This used 250 Ton Niagara Model SE4-250-84-60 straight side press is a robust piece of industrial equipment designed for high-capacity performance. With a bed and slide area measuring 84 inches by 60 inches, it o...
Cleveland, OH - Trusted Seller
Oswald Flexible Drill Unit - Fm35b
- Manufacturer: Oswald
2 Hp, 3450 Rpm Name: Flexible Drill Unit | Arrival date: 08-28-2025 | Dimensions l x w x h (inches): 42 x 42 x 41 | Electrical: 3/60/230/460 | Weight (lb.): 95 | Available quantity: 1
$140 USDEuclid, OH - Trusted Seller
1000 TON URSVIKEN “VPF1000” HYDRAULIC PORTAL TYPE STRAIGHTENING SHIPBUILDING PRESS - SYNCHRONOUS LATERALLY SLIDING PRESS UNIT & TABLE - SWIVELING T-SLOTTED UPPER PLATEN - DOUBLE COLUMN DESIGN - (COMPLETELY REBUILT)
- Manufacturer: Ursviken
1000 TON URSVIKEN HYDRAULIC PORTAL-TYPE SHIPBUILDING PRESS Rebuilt, Serial No. 836, Model VPF1000 EQUIPPED WITH: Double Column Design Synchronous Laterally Sliding Press Unit And Table Swiveling "T"-Slotted Upper...
$750,000 USDCincinnati, OH - Trusted Seller
Ram 250 Ton 4-post Hydraulic Press
- Manufacturer: Ram
- Capacity: 250,000 kg
W/hydraulic Unit, 20" X 24", (8945#) 64x47x98, (1440#) 20x20x20, (1415#) 63x36x57, *contains 3 Pieces
- Trusted SellerAuction
(Inv.55033) Shop Built Heavy Duty Shop Press
- Manufacturer: Shopbuilt
This Unit Is Part Of Kann Welding Liquidation
Millersburg, OHVisit Auction Website