• 1994 SCM SUPERSET 23 12721

    $14,000 - Williamsport, PA, USA
    • Manufacturer: SCM

    used scmi superset 23 9″ x 5″ 5-head moulder. 9hp first bottom head motor, 12hp left and right shared side head motor, 12hp top head motor, 9hp second bottom head motor, 1 13/16″ diameter spindles,...

  • 2006 SCM Compact XL 12726

    $25,000 - Williamsport, PA, USA
    • Manufacturer: SCM

    technical specifications.min. working width (finished section)25mm (.905”) *.max. working width (finished section)230mm (9.055”)**.min. working thickness(finished section)6mm (.236”).  max. working...

  • SCM T120 SHAPER

    $3,250 - New Albany, IN, USA Recently Added
    • Manufacturer: SCM

    1-used scm t120 1-1/4 shaper. table size: 36 x 43, micro adjustable fence, 1-1/4 in. diameter spindle, 5 in. under spindle nut capacity, (5) spindle speeds by step pulley (2900/4400/6000/7800/10000...

  • SCM M3 GANG RIP SAW

    No price - New Albany, IN, USA Recently Added
    • Manufacturer: SCM

    1-used scm m3 gang rip saw. main motor: 42 hp, feed motor: 2 hp, max. depth of cut: 4-3/4 in., max. working width: 11-7/8 in., feed track width: 11-7/8 in., feed speeds: 30-150 fpm, throat depth: 8...

  • SCMI R8 Pin Router

    $1,995 - Sheboygan, WI, USA
    • Manufacturer: SCM

    6.6 hp, 230 v, 3 phase 10,000 or 20,000 rpm 1/4" to 5/8" collet size 6 adjustable spindle depths 4" spindle travel 29.5" throat depth 30" x 36" non-tilting cast iron table 7-7/8" vertical table mov...

  • 1995 SCMI Selecta 12F Edgebander

    $4,950 - Sheboygan, WI, USA
    • Manufacturer: SCM

    model 12f includes glueing unit, end trimmer unit, two tilted trimmer units, edge scraper unit and buffer unit panel thickness: 10mm min, 50mm max standard speed: 12 mt/min minimum working width: 6...

  • SCMI T-100 Shaper

    $1,695 - Sheboygan, WI, USA
    • Manufacturer: SCM

    5 hp, 220 v, 3 phase 1.25" single spindle, heavy duty cast iron fence reversing switch; speed control switch

  • 2015 SCM Mini-Max ME 35 Edgebander #6123602-01

    $12,999 - North Carolina, United States
    • Manufacturer: SCM

    2015 scm mini-max me 35 edgebander, serial no: kk /129176 this unit is being sold “as is, where is”. offers are welcome! can be inspected by appointment only. please contact a remarketer and refer...

  • SCM M3 GANG RIP SAW

    $26,250 - United States Recently Added
    • Manufacturer: SCM

    midwest 1-used scm m3 gang rip saw. main motor: 60 hp, feed motor: 2 hp, max. depth of cut: 4-3/4 in., max. working width: 11-7/8 in., feed track width: 11-7/8 in., feed speeds: 30-150 fpm, throat ...

  • Clean SCM K208 3mm Machine

    $15,900 - United States
    • Manufacturer: SCM
    • Weight: 3000 lbs.

    mountain clean lightly used scm k208 3mm bander. this machine has a plc controller 3mm guillotine end trim  top and bottom trim 3mm scraping station buffing  heat reactivation station owners manual...